Why does the wireless on the phone always fail to authenticate, what is the solution?

Answer 1: WiFi and wireless networks are automatically turned off.

You can go to "Phone Settings - > Wireless & Network - >Wi-Fi Settings", click the "Menu" button below the phone, select "Advanced" from the pop-up menu, and then select "Never" from the drop-down menu of "Wi-Fi Hibernation Policy", so that Wi-Fi is always on and never sleeps. Choosing the right wifi hibernation strategy can help you have a better phone experience.

Answer 2: How to surf the Internet with wifi.

First of all, you need to have an available wireless network near you, then go to the "Wireless & Network" menu in your phone's settings, tick "Turn on Wi-Fi", and then go to "Wi-Fi Settings" to search for available wireless networks. Once you've found it, click Connect (some Wi-Fi networks are password-protected and require you to enter your password to connect).

Answer 3: WiFi is not connected to the wireless LAN (WLAN) First, if the network has a key, first make sure to get the key. Second, some networks have filtering mechanisms (e.g., MAC address filtering) Please make sure that the filtering mechanism does not filter out your phone.

Third, change the network standard Today's home wireless routers are generally supported and standardized. The network card of the computer is generally supported. However, many mobile phones only support one of them, please change the network standard and restart the router to try.

Also, it is recommended not to select a blending mode.

I have a megahertz electric cat at home, and I can use it when I plug it in. It is recommended that you call the buyer for after-sales ** to help solve the problem faster.

It's a question of routing settings

The reasons why I can't access the Internet when I connect to the wifi but need to be authenticated are:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, which causes some computers to be unable to connect to the Internet.

5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested Solution:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

Answer: Hello, there is an error in the wireless network data, just reset the wifi password to solve this problem; You only need to log in to the management page of the router, reset the wifi password, and log in to the wifi again after saving. If you can't use it, you can also press the reset button on the router to reset the router and then complete the Internet settings and wifi password again. Here's how:

1. Log in to the wifi signal of the current router, and then enter the IP address on the browser, and enter the password to log in;

2. Enter the management page of the router, click the [Wi-Fi] option, find the [WPA Password Setting], fill in the new password, click Apply, and wait for the router to reboot and log in to the Wi-Fi with the new password.

3. If you still need to enter the password, you can also find the reset button on the router body, press and hold to reset the router, and then reset the router's Internet access and wifi related options, and you can surf the Internet normally after the setting is completed.

This is a login authentication set up by the network administrator to filter users who restrict the network. to log in to the network directly with your account. Here's how.

1. Take Huawei mobile phones as an example, firstly, find the WiFi that displays the words "Login authentication required" in the WiFi interface, and click on it.

2. After clicking, the system will automatically open the browser and jump to the wifi login interface. At this time, enter the account number and password in the boundary source plane, and then click the "Login" button below.

3. After logging in, the webpage will prompt that the connection is successful. At this time, click the "Internet Now" button to access the webpage normally.

Most of the time it's because you're connected to a wireless network that requires authentication, like the paid wireless network opened by the operator, which requires your account and password to log in.

The specific method is to open the authentication through the browser and enter the account password to access the Internet. If not, you can purchase it on the pop-up page in your browser.

The mobile phone number can't be called**How can I resume normal use?

The need for login authentication may be caused by the use of mobile phones to connect to wifi display: 1. There are too many wifi signal sources near you, such as going up and down the stairs, neighbors, etc., all of which have wifi, and the channels of the router are almost all defaulted to 6 channels, which will cause mutual interference between routers, so that login authentication is required, you can enter the default IP address of the router, select wireless settings - basic settings - channel, change the channel to 11 or 13, and you can solve the problem. 2. The password encryption method of the router is best to choose WPA-PSK WPA2-PSK, otherwise when the mobile phone is verified, the password encryption method will also lead to authentication failure, and the encryption method of WPA-PSK WPA2-PSK is not only safe, but also not easy to be cracked, and you should also pay attention to the case when entering the password, and the password input error will also show the authentication failure.

3. Problems with mobile phones or router devices will also lead to this situation, at this time you can choose to restart the mobile phone or router, if all terminal devices can not connect to this wifi normally, you can restore the router to factory settings, reset the password, try again, if other mobile phones and computer terminals can be connected, there is no problem, then it is a problem with your mobile phone, you can also restore the mobile phone to factory settings or flash, and then try to connect again.

Hello, using a mobile phone to connect to wifi shows that you need to log in to authenticate for the following reasons: 1. There are too many wifi signal sources near you, such as going up and down the stairs, neighbors, etc., all have wifi, and the channels of routers are almost all default to 6 channels, which will lead to mutual interference between routers, so that there is a need for login authentication, you can enter the default IP address of the router, select wireless settings - basic settings - channel, change the channel to 11 or 13, You can solve the problem. 2. The password encryption method of the router is best to choose WPA-PSK WPA2-PSK, otherwise when the mobile phone is verified, the password encryption method will also lead to authentication failure, and the encryption method of WPA-PSK WPA2-PSK is not only safe, but also not easy to be cracked, and you should also pay attention to the case when entering the password, and the password input error will also show the authentication failure.

3. Problems with mobile phones or router devices will also lead to this situation, at this time you can choose to restart the mobile phone or router, if all terminal devices can not connect to this wifi normally, you can restore the router to factory settings, reset the password, try again, if other mobile phones and computer terminals can be connected, there is no problem, then it is a problem with your mobile phone, you can also restore the mobile phone to factory settings or flash, and then try to connect again.

Summary. The need for login authentication may be caused by the use of mobile phones to connect to wifi display: 1. There are too many wifi signal sources near you, such as going up and down the stairs, neighbors, etc., all of which have wifi, and the channels of the router are almost all defaulted to 6 channels, which will cause mutual interference between routers, so that login authentication is required, you can enter the default IP address of the router, select wireless settings - basic settings - channel, change the channel to 11 or 13, and you can solve the problem.

2. Problems with mobile phones or router devices will also lead to this situation, at this time you can choose to restart the mobile phone or router, if all terminal devices can not connect to this wifi normally, you can restore the router to factory settings, reset the password, try again, if other mobile phones and computer terminals can be connected, there is no problem, then it is a problem with your mobile phone, you can also restore the mobile phone to factory settings or flash the phone, and then try to connect again.

The need for login authentication may be caused by the use of mobile phones to connect to wifi display may be caused by the following reasons: 1. There are too many wifi signal sources near you, such as going up and down the stairs, neighbors, etc., all of which have wifi, and the channels of the router are almost all defaulted to 6 channels, which will cause mutual interference between the road state base files, so that login authentication is required, you can enter the default IP address of the router, select wireless settings - basic settings - channels, and change the channel to 11 or 13, You can solve the problem of sailing chaos. 2. Problems with mobile phones or router devices will also lead to this situation, at this time you can choose to restart the mobile phone or router, if all terminal devices can not connect to this wifi normally, you can restore the router to factory front shooting settings, reset the password, try again, if other mobile phones and computer terminals can be connected, there is no problem, then it is a problem with your mobile phone, you can also restore the mobile phone to factory settings or flash the phone, and then connect again.

Data expansion: WiFi is a technology that can wirelessly connect terminals such as personal computers, handheld devices (such as PDAs, mobile phones) and other terminals. Like Bluetooth technology, WiFi technology is a short-range wireless technology used in the office and home.

2. WLAN is a local area network composed of wireless mode in the 5GHz frequency band, referred to as wireless LAN. WLAN communication systems are generally used in the same building as an alternative to wired LAN. What else can help you, dear, I hope it can help you, I wish you a happy life

Meaning that the connection to wifi requires verification, which is set in the router, as follows:

1. First, enter the IP address in your browser.

Then enter the username.

and password to log in to the router background as shown in the figure below, and then go to the next step.

2. Secondly, after completing the above steps, click on Wireless Network.

options as shown in the image below and proceed to the next step.

3. Then, after completing the above steps, find the WPA password settings, fill in the stool to write a new password, click the "Apply" button, as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, or click on the authentication mode, change to "open", no secret is required, as shown in the image below, and then proceed to the next step.

5. Finally, after completing the above steps, click the "Apply Nuclear Envy" button to save Sun's Brigade, you can connect to WiFi without a password, but you need to verify it, it is set up in this place, as shown in the figure below.