What is the job like for a custom furniture installer? Is there a prospect for development?

The work of a custom furniture installer is still OK, the work is relatively easy and will not be very tiring, and it is very promising for development, everyone needs to install furniture after buying a new house, and the demand is great.

The job of a custom furniture installer is okay. It's simple and not very tiring. It has great prospects for development. Everyone needs to install furniture after buying a new house, and it is in high demand.

I think the work is harder, but the pay will be higher. There is definitely a prospect for development, and it is rising very quickly.

The job of a custom furniture installer has a promising future. After working for two days, I was "expelled from the division" and disliked by the boss, saying that I was not the material for work. Indeed, at that time, he was well-mannered, he still wore glasses, and his little hands were as if he had never done heavy work!

So I didn't work in the factory later, and followed my dad to learn installation, (according to the current situation, whether it is a big brand, a small brand, a lot of problems in the design process and production process, all of which will be exposed during installation, and bring the installation master to the scene to solve the problem), as an installation master, it is also tiring.

<> if there is a car, plus the transportation fee. After a few years of experience, after a month, it is certain that it is better than ordinary work, and what you earn is hard work. The disadvantage is that if the hand is not fast, if there are fewer manufacturers to work with, the income will be less, and there will even be a situation where there is no work for a few days.

Some you have not done it, start with delivery, watch the master do it, no elevator for a month can not survive, not to mention making money or not, if you think you have to rely on this to eat, then do it, if you have other ways to go, don't enter this industry.

With the increasing improvement of people's living standards and the continuous development of urbanization, the development trend of private customization is more obvious. Therefore, the custom furniture industry is a very promising industry, and the installation of custom furniture has a natural prospect. It is also necessary to be skilled and efficient, not only to clean themselves, but also to clean up the site after the work.

Not only can we work, but we must also be able to deal with all kinds of incurable diseases to ensure a high completion rate. Whether it feels difficult or not, it actually comes down to character, followed by attitude.

Panel furniture is relatively simple, has not done a few days of contact can be installed independently, custom furniture is a little troublesome, need to learn some professional skills, these are no problem, remember to find a professional custom manufacturer, if you need to change the size on the spot, it will be a waste of time! First of all, the current furniture installation industry in the country is not welcomed, everyone admires decent white-collar workers, but with the graduation of college students in recent years, it is equal to unemployment, the future of technicians and masters slowly infiltrated into the highly educated population, and the low-level workers with low education are relatively reduced, which may be improved.

It is because such work is often tiring, and most people feel that this kind of work does not have any technical content, so the average young person often does not choose to do such a job, and will choose some jobs that they like.

The main reason is that this kind of work is more difficult, and it is some hard work, young people are not willing to endure this hardship, and the salary is not high enough.

Because many young people are afraid of trouble, they will not choose custom furniture, and generally choose to buy some overall furniture.

Furniture installation is manual labor and is relatively tiring.

The main job content of a furniture installer is:

Cooperate with the project site delivery, receiving, etc.;

Complete the installation, disassembly and assembly of furniture;

Fulfill the reasonable requirements of the customer and the aftermath work;

Complete the task of after-sales maintenance.

Precautions for Zhongyu in the process of furniture installation:

Before installation, check whether the packaging is intact and whether there is damage, if such a situation is found, the on-site installer must be required to open the box to check the internal furniture of the damaged part, whether there are bumps, scratches and other transportation problems;

If there are glass products or plastic products, it is recommended to check whether they are broken or deformed, etc.;

When installing, we should pay attention to the protection of other locations in the home, because the furniture is generally the last to enter the site in the process of home decoration (if you do not decorate, you must protect the items at home), after the furniture is installed, it is necessary to do cleaning, and the key protection objects are: floors (especially solid wood floors), door sets, doors, stairs, wallpaper, wall lamps, etc.;

Installation of hardware such as handles and handles: here is mainly to determine the installation location, to the most suitable height or position of the family, and the defeat of the god should not be beautiful and good-looking, such as the handle of the hanging cabinet or the height-increasing cabinet must be installed under the door, and the small cabinet of the base cabinet and writing desk must be placed on it;

Detect whether the whole is consistent with the design plan, whether the internal pattern is consistent with the plane plan, and whether there are surface bumps and scratches;

Detection details: for example, whether the handle is missing (don't be surprised), for example, in a U-shaped cloakroom, n doors in different directions, it is very likely.

Whole-house custom installers are promising.

Whole house custom installer is an emerging profession, and with the increasing demand for custom home furnishings, the future development prospects of this profession are very broad. With the development of the domestic economy, people's requirements for quality of life are getting higher and higher, and more and more families have begun to choose customized homes to meet their needs. And whole-house custom installers are professionals who meet this need.

With the continuous expansion of the Dingruming home furnishing market, the demand for customized installation of the whole house will also increase. At the same time, this profession also requires high skill requirements, requiring certain design, production and installation capabilities, so whole-house custom installers who can master these skills will be more popular and competitive.

In short, with the continuous development and improvement of the custom home furnishing market, the career prospects of the whole house custom installer are very broad and there is a lot of room for development.

The time required for a whole house custom installer to learn is as follows:

Furniture installation apprentices need to learn the time is not fixed, but also according to the actual situation to consider the learning ability and acceptance of different apprentices is not the same, so the need to learn the time is not the same, if the ability to learn is very strong, and have a certain ability to accept, then in general, as long as the study of about a year can be learned, but if the ability to learn is poor, but also to learn longer. If you want to learn furniture installation, then it is best to find a more experienced master who can teach you more knowledge. <>

I think it's pretty good. It's a craft, learn it well, and you're not afraid of having nothing to do. If you do fine, you can also make a lot of money.

Ask for a furniture installer! I really want to learn.

Clear answer: Furniture installation is a very good job.

Explain the reason: the salary is higher than the average job, after all, it is a technical job. Generally, the monthly income of teachers who have been more than a few years is more than 10,000 yuan.

Work is relatively free, take orders by yourself when you have an order, and you can take a break when you don't have a good life.

Is there a solution:

The order volume is large, and the left and right hands cooperate with large home furnishing enterprises across the country to ensure sufficient orders;

The platform does not charge a service fee to take orders on the platform.

Safety is guaranteed, and the left and right hands cooperate with PICC to ensure the personal safety of the master and the safety of the user's property;

1. Different definitions: custom furniture is specially created according to people's own wishes, which can give full play to people's imagination. Custom-made furniture refers to customizing furniture by appointment.

2. The benefits are different: furniture installers and custom furniture are selected by the business, and then tell what type of furniture they want, what material and shape they want, and the manufacturer will customize this furniture according to the requirements.

3. **Different:

The difference between the two is the first thing that many people think of. Custom-made furniture under the same material is more expensive than woodworking furniture, which is true, but the difference is not very large, because the price of carpentry is not cheap now.

4. The process is different

Customized furniture is processed in the factory, and now many brands are automated production of instruments, precise cutting, edge sealing and chamfering integrated molding, which can effectively prevent the release of trace formaldehyde inside the board. The carpentry cabinet is on-site construction, which will produce a certain amount of pollution in the processing, and most of the woodworking is not precise in cutting and edge sealing.

It is all furniture installation, the former may be conventional furniture installation, it is very simple, custom furniture is customized by the customer, the installation method is not the same, the difference is basically the same.

It is to help customers assemble furniture.

Generally, except for the particularly small shoe cabinet furniture, it can be divided into several parts, so that it is easy to transport and assemble the furniture of the family cave There is no way to enter the normal door. The furniture in the furniture store is also installed by the furniture installer, and when someone buys a sample, the furniture installer will disassemble the furniture and transport it to the customer's home for re-installation.

If the purchase is not a sample, then the furniture itself is transported to the customer's home, at this time, a professional furniture installer is needed to help assemble, especially some large furniture needs furniture installers. Not only do they have a wealth of experience, but they also have professional equipment to install the furniture in the town quickly and well.

Nowadays, there are many simple furniture that can be assembled by themselves without the need for professional installers, and it is slowly becoming popular with everyone. And it is worth noting that the furniture has a fixed number of disassembly and assembly, which is generally 5 to 8 times. If it is disassembled too often, it will affect the joints of the furniture, which will affect the service life of the furniture.

The materials are different, and the panel furniture made by woodworking is basically made of large core boards, also called woodworking boards, with good nail grip. Custom-made panel furniture is generally melamine board, particle board and so on. In terms of production technology, the manpower and material resources of carpentry are limited, so the surface feels slightly worse.

There are many differences in the materials used for custom source rock panel furniture, so it is not possible to generalize. There are also many gaps. Of course, there are also different grades of large core boards used for woodworking.

So it's still a good choice. The furniture made by the carpenter is also quite labor-intensive because it needs to be scrapped, so the overall cost is more.

Customized is mechanized production, the size of the cutting is more exquisite, or more detailed, and there is an automatic edge banding machine can be used to seal the edge, which is much better than manual sealing, and the workmanship is also fast with mechanical processing.

One is machine-produced, and the other is artificially manufactured. Mechanical manufacturing is certainly better than carpentry in terms of technical handling, and there is an after-sales warranty. Save time, effort and worry, and tailor-made furniture. Professional production, quality building.

Every household is inseparable from furniture, and customers usually have two ways to get their favorite furniture, one way is to process it by hand on site, and the other way is to buy industrialized finished furniture in stores. Both types of furniture have their own advantages and disadvantages.

The biggest advantage of on-site hand-processed furniture is that the residential space can be used to the greatest extent, and the furniture can be made into what the residential space needs to be used, whether it is tall or short, or garden or square, wide or narrow, and even irregular shapes can be used well.