What materials do you need to make cabinets, and what kind of boards are good for cabinets

1. Solid wood. When it comes to cabinet materials, it is naturally the best solid wood, which avoids the excessive use of adhesives, is more healthy and environmentally friendly, has strong bearing capacity, is safe and stable, and has a long service life and is durable, but the cost of solid wood cabinets is higher, so most of the wardrobes on the market use boards or boards to make wardrobes.

2. A large core board.

Large core board, also known as blockboard, is a good material for cabinet frames. The large core board is a plywood with a solid wood core, the inner layer is a core spliced with strip logs, and then pasted on the outside to make of materials, the surface is smooth and flat, the stability is strong, not easy to deform, according to the thickness is generally divided into plywood, plywood and nine plywood, the thicker the higher the higher, according to the pressure and strength to choose.

3. High-density board.

High-density board is a commonly used wood-based board, which is made of wood, branches, etc. after soaking in water, crushing and pressing, uniform density, high strength, and easier processing, but the disadvantage is that the moisture resistance is not good, and wet places such as kitchens and bathrooms are not suitable for use.

4. Solid wood particle board.

Solid wood particle board is made of solid wood into particles, and then pressed with glue, which retains some of the physical characteristics of solid wood, has a good nail grip force, light texture, and will not cause too much pressure on the wardrobe, but the bearing capacity is not weak, and the cost is low and cost-effective, so it is often used in cabinet manufacturing.

The 120-square-meter new house is ready to enter the carpentry, and how many materials are needed to hit the cabinet on the ceiling, let's calculate it on the spot.

Solid wood board and particle board are good.

1. Solid wood board

The board cut from pure natural wood has a natural texture and wear-resistant load-bearing, which is a kind of board with a high degree of environmental protection. However, because it is made naturally, it is very expensive, and the price is the most expensive of all the plates. In addition, the density and hardness of solid wood panels are lower than those of wood-based panels, and the nail holding force is poor, and the cabinet body has a high risk of deformation after a long time.

2. Multi-layer solid wood board

The veneer or thin wood cut into wood is formed by hot pressing and bonding, also known as plywood. Since it is a multi-layer structure, it has a stable structure, high hardness and strong load-bearing capacity. However, the fatal flaw is poor toughness, easy to bend and deform, especially when making cabinets with a height of more than meters, the longitudinal stretch is too large, and the probability of deformation is very high.

3. Particle board

It is a board made of wood or lignocellulose as a material and hot-pressed with an adhesive. Because of this, its production cost is very low, coupled with the good stability and durability of the plate after pressing, so it has become the first choice for many custom wardrobe brands. However, after all, particle board is glued and synthesized, and formaldehyde pollution is inevitable, so some businesses on the market advertise that their own boards achieve "zero formaldehyde", which is very false, don't be gullible.

Of course, there is no need to worry too much about formaldehyde, as long as the formaldehyde emission of general particle boards does not exceed the national standard E1 standard, it is a qualified plate, and you can buy it with confidence.

4. Ecological board

A kind of board with fir wood as the core and melamine veneer, some people also call it in the market: melamine board paint-free board. Because it only pastes a layer of wood grain veneer paper on the surface of the wood, it uses less glue, so it is not too polluting and has a high degree of environmental protection.

However, one of the defects of the ecological board is that the force is uneven, the nail holding force is poor, and the edge is easy to collapse. Therefore, it is more suitable for cabinet panels, for wardrobe panels, and the cost performance is not high.

5. MDF

The board bonded with wood fiber and glue has low production cost but poor environmental protection, and the only advantage is good toughness, not easy to deform and crack, and it is very suitable for cabinet doors.

From the point of view of cost performance: particle board is larger than multi-layer solid wood board, larger than ecological board, larger than MDF than solid wood board.

From the perspective of environmental protection: solid wood board is larger than ecological board, larger than multi-layer solid wood board, larger particle board than MDF.

In the process of home decoration, many owners will ask the carpenter master to customize the wardrobe on site, because the wardrobe and bedroom space are more suitable for this way, and we use it more conveniently.

However, in the process of home decoration, we should pay attention to the four details of the customized wardrobe, so as to ensure the quality of the wardrobe to the greatest extent.

1. Design drawings.

Design drawings can be said to be the most important thing to build a wardrobe, but for those experienced carpenters, basically before the creation of design drawings will rarely be drawn, are based on their own experience, so it is recommended that owners at home decoration, try to let the carpenter master draw a rough design sketch, to see if it is in line with our habits, if found inappropriate, try to communicate with the carpenter master in time.

Second, the plate. Whether the board used in the wardrobe is environmentally friendly is directly related to our life and health, if the quality of the board used is not good, it will contain a large amount of formaldehyde, which will threaten our life safety. Therefore, when building a wardrobe, the quality of the board must be ***, and it is recommended to choose a plate that meets the E1 or E0 standard, which is often more environmentally friendly.

Third, the wardrobe edge.

Before creating a wardrobe, be sure to ask what exactly is the way the wardrobe is edged? Is it machine or hand banding? Modern carpenters often use machine edge banding when making furniture, because the quality is better, more durable, and more importantly, it will not produce secondary pollution.

Hand-banding is the glue of PVC strips on the edges of the wardrobe, which is not only unreliable in quality, but also unsightly.

Fourth, the cabinet door. The wardrobe specially customized by the carpenter master is often just a general frame, and the cabinet door still needs to be chosen by the owner himself, and everyone should choose the cabinet door of the same color as the wardrobe frame when choosing the wardrobe door, so that the overall sense of the wardrobe is stronger.

If you ask a carpenter to make a cabinet, you just need to pay attention to your own design, and you must first tell him what kind of layout you need, because if they make cabinets, there is basically no problem.

Cabinets are generally made of dense Bidu board, solid wood particle board, solid wood multi-layer board, blockboard and ecological board.

1. MDF

The main material of MDF is wood fiber, which is pressed at high temperature, with soft texture, good impact resistance, simple processing method, and is widely used in wardrobe boards. However, the waterproof performance of MDF is poor, and it is very likely to be deformed, so it is necessary to pay attention to moisture-proof maintenance every day.

2. Solid wood particle board

Solid wood particle board is a new type of environmentally friendly board that is popular in the market, with high density, large price of wood fiber particles in the board, retaining the characteristics of natural wood in the production process, very environmentally friendly, and convenient processing.

3. Solid wood multi-layer board

Solid wood multi-layer board, also known as plywood, is made of a variety of woods cut into veneer or thin wood, and then glued together with adhesives. Solid wood multi-layer board has more than three layers, generally belonging to the odd number of layer veneer, with excellent waterproof performance, and environmental performance is better than particle board and MDF.

4. Blockboard

Blockboard is a commonly used wardrobe board, with excellent sound absorption, heat insulation advantages, grip screw force and strength are quite excellent, blockboard sweat rate is low, usually between 10 and 13, environmental protection and moisture-proof performance is excellent, but blockboard can not be directly painted, but also to buy panels and paint, more troublesome.

5. Ecological board

The eco-board is made of all solid wood, the stability and nail holding force are excellent, not easy to deform, and the environmental performance of the eco-board can reach the E0 level of the European beam, which is the preferred wardrobe board for many families.

1.Solid wood board It is a kind of board made of log pressing, which has the characteristics of natural environmental protection, strong and durable, and the material surface is beautiful, which is the preferred material for making cabinets.

2.Particle board is a material made by breaking up wood and gluing it together. It is highly decorative and has a good thermal insulation effect, but it is not environmentally friendly.

3.Multi-layer board is bonded with three layers of wood, which has good stability and good use effect of the cabinet, but the environmental protection is not as good as that of solid wood board.

If you don't choose the board for decoration, the cabinet is mostly the particle board used, because the particle board is affordable.

The same is to make cabinets, different materials will produce different textures, and each has different advantages and disadvantages. Ecological board and multi-layer board cabinets are commonly used materials, which can be seen in all kinds of cabinets, but the advantages and disadvantages also need to be remembered. In this way, we can prevent bad problems and make the cabinet of excellent quality.

The advantages of eco-boards and multi-layer boards as cabinets.

The eco-board has a good fireproof and moisture-proof function, and will not change in the face of different environments. This material is often used in cabinets and bathroom cabinets, and it will not peel and change color due to changes in the environment, and can be processed into a variety of styles. It is simple and convenient to install, and there will be no peculiar smell, which is a high-quality choice in the industry.

Multi-layer board is an ideal choice for the production of furniture, hard, stable, beautiful, comfortable, and the temperature and humidity adjustment is also first-class. For users who like environmental protection, multi-layer boards are multiple choices in line with the market.

The disadvantages of eco-boards and multi-layer boards for cabinets.

The ecological board has certain requirements for the cutting process, and without superb craftsmanship, it is easy to make problems. When buying, there is a lot of fluctuation between the furniture companies, if you want not to have a problem, it will be better to find a regular platform, and you can give a reasonable calculation on the **.

Multi-layer board also has process requirements, if it can not meet the requirements in the technical level, the quality of the multi-layer board will decline, and the quality of the cabinet will soon decline. In order to maintain the quality, choose a professional brand, and the effect will be better.

The above is the introduction of the advantages and disadvantages of ecological boards and multi-layer boards for cabinets, only by understanding this, can we select real high-quality products.