What happens if the car is filled with more oil, is there any harm?

Updated on Car 2024-03-17
11 answers
  1. Anonymous users2024-02-06

    Hello! Adding too much oil to the car can easily cause the problem of burning engine oil, and in serious cases, it will damage the engine of your car, so you must pay attention to not being higher than the oil scale when replacing the added oil.

    It is still recommended that you go to a professional car repair and maintenance chain to buy and change the engine oil. It can ensure your driving safety.

    Chiga"It is a professional car maintenance brand under Michelin, and it is the earliest and largest car maintenance brand in China. Chiplus focuses on fast repair services for tires, oil and brakes, and uses global Chiplus technology experience sharing to provide professional repair and maintenance services in China to ensure the safe driving of vehicles.

    The oil cooperation brands of Chijia stores are Shell, Castrol and Total, which are three internationally renowned brand oils, and you can click on the specific links.

    You can also log in to the official website of Chijia.

  2. Anonymous users2024-02-05

    Hello! If the oil in the crankcase of the automobile engine is added, the heat dissipation effect of the engine is not good, and the engine temperature is too high, which reduces the viscosity of the oil, reduces the lubrication performance, and has an impact on the power of the engine, so that the power is insufficient.

  3. Anonymous users2024-02-04

    Adding too much oil can cause the engine to "stuffy", and sometimes remove the oil from the oil rod.

  4. Anonymous users2024-02-03

    Generally, the actual filling volume of engine oil is the sum of the engine oil pan volume + filter volume (i.e., the theoretical filling volume), and then subtracting liters; It is not appropriate to add more or less engine oil:1Increasing the amount will affect the oil pressure, circulating flow rate, and reduce the lubrication quality and cooling effect; 2.

    Add more, crankshaft transmission resistance increases, increases the load, and at the same time, there is.

  5. Anonymous users2024-02-02

    The pressure can rise, causing problems with the engine, causing parts of the seal to break, and there will be oil leaks, which can lead to problems with the crankshaft.

  6. Anonymous users2024-02-01

    It will lead to transmission failure, increased oil pressure, and will also wear out the engine, which will lead to damage to parts, or the oil seal is not tight, and there will be oil leakage, and the car's parts system will fail.

  7. Anonymous users2024-01-31

    It is possible that the pressure is too high, which affects the heat dissipation, causes oil leakage, leads to increased fuel consumption, and increases the difficulty of maintenance, resulting in poor operation of internal components and no power.

  8. Anonymous users2024-01-30

    If there is too much oil, it will enter the combustion chamber from the gap between the cylinder and the piston, and carbon will be deposited. These deposits increase the engine's compression ratio and increase the probability of knocking.

    At the same time, too much oil will also increase the stirring resistance of the crankshaft connecting rod, resulting in an increase in fuel consumption, which also leads to an increase in the internal pressure of the engine, resulting in oil leakage from the engine seals.

    There are two scales on the oil scale, and the oil level is best in the middle of the highest and lowest scales. No more, no less, just the right amount.

  9. Anonymous users2024-01-29

    What happens if you add too much oil? (Exceeding the upper limit) the power decreases and the fuel consumption increases. The car oil at the bottom of the cylinder does not touch the engine crankshaft, the car oil meets the engine crankshaft, it indicates that the car oil is too much, the engine crankshaft is to rely on the car oil lubricating oil, but not by touch moisturizing, its lubrication is maintained by the working pressure oil given by the fuel injection pump.

    If there is too much automobile oil in the automobile engine, and most or all of the engine crankshaft is soaked in lubricating oil, the obstruction force of automobile oil to it will expand, and the opening to the outside world will be that the automobile engine will run sullenly and the running friction resistance will expand.

    This is like a smuggling car with a driving force to push the rotation, originally did not touch the water, turned very happy, the conclusion fell and the water rose, then now that it touches the water, the friction resistance of the sand Chang will expand, not to mention that the car oil may have a certain viscosity. The frictional resistance of the engine crankshaft increases, the driving force is reduced, and then the computer operating system of the automobile engine will automatically let the vehicle multi-oil pump to improve the power, of course, the fuel consumption is high, the conclusion is to affect the driving force export, and increase the fuel consumption.

    Accelerating the cause of carbon deposit, if the car oil is added too much, it will be everywhere all kinds of infiltration, the most stray cake is to flow into the engine combustion chamber of the car engine, which is equivalent to saying that it is burned with car gasoline, and the long-term engine oil burning will cause carbon deposit, and the carbon deposit in the engine combustion chamber will increase, and the vehicle will have carbon deposit, the driving force will be reduced, and the fuel consumption will rise.

    It is very likely to destroy the three-way catalytic converter, because the amount of automobile oil entering the cylinder increases, so that the exhaust emissions become vicious, affecting the service life of the three-way catalytic converter, and the three-way catalytic converter may be destroyed in serious cases. Accelerate the aging of auto parts, some car series due to the air intake system in the car oil too much, will cause each component to bear the economic burden and work pressure is particularly large, the greater the work pressure, the faster the aging of various components in the vehicle. The more prominent is the crankcase ventilation seal, the higher its burden, the more it will accelerate aging, and it is very likely to cause the risk of automobile oil leakage after aging.

  10. Anonymous users2024-01-28

    Will burn engine oil; You do it, and please adopt it.

    There is an excavator in Tianjin 9 into the new, bought back in Shenzhen, a little slightly burned oil, and then the boss found me, with two barrels will not burn, Sichuan Guang'an a boss surnamed Wu, there are 11 excavators are using super American eutectic oil, do not burn oil.

    A few days ago, there was a BMW five series car, seriously burned engine oil, 1000 kilometers to add a barrel of engine oil, and then a friend introduced the use of super American eutectic engine oil, but half a month has passed, and there is no need to add it at all. And his excavators and big diesel cars don't burn engine oil.

    There are also Audi cars from the Puyang Land Bureau, all of which burn engine oil, and some people use super American eutectic engine oil for them, and they don't burn it, and the leaders are very satisfied.

    It is recommended that when you change the engine oil, use the internal cleaning agent of the super-American eutectic engine, and then change the super-American eutectic engine oil;

    If you feel that the power is insufficient, add a few bottles of super American eutectic fuel treasure;

    If the wear is large, add a strong anti-wear repair agent for the eutectic engine.

  11. Anonymous users2024-01-27

    Generally, the actual filling volume of engine oil is the sum of the engine oil pan volume + filter volume (i.e., the theoretical filling volume), and then subtracting liters; It is not appropriate to add more or less engine oil:1Increasing the amount will affect the oil pressure, circulating flow rate, and reduce the lubrication quality and cooling effect; 2.

    Add more, crankshaft transmission resistance increases, increases the load, and at the same time, there is.

Related questions
14 answers2024-03-17

It is not good to add too much oil, or draw it out again, the crankshaft will be immersed in a lot of oil, which will increase the difficulty of the crankshaft rotation, because the resistance increases. In addition, fuel consumption will increase, and the engine will also have a weak acceleration. Like the engine oil I normally add, I buy 4L GT engine oil, it is enough to add it, GT is the power of PAO base oil, there is no need to add too much, just worry about burning the engine oil and check it often.

14 answers2024-03-17

1. It may lead to insufficient engine lubrication, which will increase engine wear, and if there is a shortage of oil for a long time, the engine will eventually be burned. >>>More

42 answers2024-03-17

I don't know what the future holds. Can't and can't**. But what I'm going to say is. No matter how the future changes, we still have to work hard to fight for it.

18 answers2024-03-17

Mainly genetics, eye habits can lead to myopia, etc., are all rumors.

6 answers2024-03-17

Beijing Deshengmen Hospital of Traditional Chinese Medicine - Li Yapeng - **Department - Attending Physician - What are the consequences of nail fungus?