How to draw a metallic effect with PS

First, create a blank document, then make a gradient transition from 80% gray to 40% gray (the specific value depends on the individual), and then choose.

Filter - Noise - Add Noise (40 units are OK), then convert the image mode to grayscale, and then convert back to RGB (because after adding noise, the image is color, and what you need is the effect of metal iron plate, so the grayscale effect is better), the next step is to choose.

Filter - Blur - Motion Blur (Angle to personal preference, the distance is generally about 70), so as to achieve the effect you want, it should be noted that after doing a good job, there will be a part of the effect at both ends of the image is not obvious, need.

excision, so the size should be slightly longer when creating the document.

It's actually quite easy to create a metallic effect.

Open a ** that needs to be made of metallic texture, copy a layer, double-click the copy to enter the layer style, check the gradient overlay, select black and white for the gradient color, adjust the value, check the text and science for the authenticity and select, there is a strip texture, and then adjust the opacity, and finally check and select the bevel and relief, adjust the value, and the metallic effect is completed.

As a design, you don't know how to do this kind of metallic texture yet? I'll teach you a little trick!

1. Create a new file with a white background, and then, in the Layers panel, create a new layer as Layer 1.

2. Then, use the Custom Shape Tool on the canvas of Layer 1 to draw a gray square. Then, press Ctrl, click on the thumbnail of Layer 1 and select the square.

3. Click on the channel panel, and then click the "Save Selection as Channel" button under the bottom point, as shown in the figure below. One more "alpha 1.""Passage. Mouse down "alpha 1.""Passage.

4. Then, click in order: filter Blur Gaussian Blur, in the pop-up box, the parameter is set to 1; Click OK again.

5. Follow step 4 and repeat 2 more times; By the third time, the parameter is set to 3; Click on the Layers panel here and copy layer 1 to make a copy of layer 1.

6. Then, click in order: Filter Rendering Lighting Effect. The "Lighting Effect" settings window pops up on the right; In the Light section, select Point Light, and in the Texture section, select Alpha 1.

Then, for other parameters, please see the figure below. Remember to click OK above.

7. Press Ctrl+M to bring up the curve operation box; Set it up again, and then click OK. This is shown in the figure below.

8. Then, in the Layers panel, click the "Add Layer Style" button. Click "Projection" in the menu that pops up.

9. In the pop-up "Layer Style" operation box, set the parameters as shown in the following figure. Then click OK.

10. Ctrl+D key, deselect, the operation is completed. The final result is shown in the figure below.

Final Result:

1. Create a 600 * 600 pixel file, as shown below.

2. Select the Subdefinition Shape tool and select your favorite shape.

3. Create a new layer, pull out the graphic effect, and select gray as shown below.

4. Press Ctrl to bring up the selection area by thumbnail of the dot layer panel, then click the channel panel and click the obscured button below to save the selection.

5. Keep the selection unchanged, click on the new channel, execute: filter > blur > Gaussian blur, the value is 1, and then perform a blur operation after confirmation, the value is 3, this should be grasped by yourself, blur several times to avoid layers on the edges, affect the effect.

6. Go back to the layer, and then copy the entire map difference oak layer.

7. Then execute on the copy: Filter > Render > Lighting Effect.

8. Select the texture channel of Tongxuyou bypass, and other parameters are set as shown below.

9. Press Ctrl + M to adjust the curve, highlight the black and white inside, and set the parameters as shown below.

10. Make a copy of the first layer and put it on top (at this time, the metal effect will work, but don't worry).

11. The following is to strengthen the metal effect. Execution: Filter > Sketch Keys > Chrome.

12. The parameter settings are shown in the following figure.

13. After confirmation, change the layer blending mode to "Overlay".

14. Merge all layers, and the effect is out.

15. Then add some contrast, make some layer shadows, adjust your favorite color, and you're done.

1.It is necessary to adjust the basic auspicious draft parameters of the shader and select the metal.

2.You need to adjust the highlight level and glossiness.

3.Note that you can select the reflection in the map, and click on the right to select Light Tracking.

<>4.It is necessary to select an appropriate environment map and adjust the parameters related to the environment map appropriately.

Hot stamping, also known as "hot stamping". A printing decoration process. The metal plate is heated, foiled, and the gold text or pattern is embossed on the print. With the rapid development of hot stamping foil and packaging industry, the application of anodized aluminum hot stamping is becoming more and more extensive.

Product Applications. 1 Ordinary gold, laser stone tomb gold hot stamping. It can be used on most products, including gold cards, silver cards, laser Zen cards and glass.

Related Products. The hot stamping on the glass card is more commonly used.

2 Positioning holographic bronzing. Holographic laser positioning anodized aluminum is a special process application in design, with corresponding anti-counterfeiting patterns, which can greatly improve the anti-counterfeiting ability of the product, and at the same time improve the grade of the product. This kind of anodized aluminum is generally produced domestically, and compared with foreign imports, it is cheaper, but the hot stamping performance is slightly worse.

Holographic laser positioning anodized aluminum has a great relationship with the control of hot stamping temperature, hot stamping pressure and vehicle speed, and even hot stamping models.

3 Special application of anodized aluminum in the process. Ironing before printing is a new idea in the cigarette label design and printing industry. The application of this process places high demands on anodized aluminum.

4.Direct foil stamping on the surface of UV varnish. The process itself has quite high requirements for UV varnish and bronzing anodized aluminum, and when coating varnish, it is necessary to pay attention to the size of the oil volume, and try to ensure the relative stability of the whole batch of coarse varnish coating, and the oil layer should be thin and flat; For the anodized aluminum used for hot stamping, it is required to be high temperature resistant, have good adhesion, and have good foil stamping adaptability with the varnish (the type of resin used in the varnish matches the hot melt adhesive in the hot stamping anodized aluminum).

In all products, the scope of application of this process is small, in addition, anodized aluminum in gold, silver ink and matte oil bronzing also has high requirements for the hot stamping surface and hot stamping anodized aluminum, if the ink particles on the hot stamping surface are large or the surface is rough, will directly affect the normal progress of hot stamping.

Tool: PSCS4 version.

1. Open the PS software, and then enter the page.

<>3. Then set the height and width according to your needs, the color mode is RGB, and the background is white.

<>6. The following is the effect of executing clouds.

<>8. Set the radius to 50.

<>10. Adjust the value of the quantity according to the demand.

<>16. Select the layer style, click the gradient effect to set the opacity, gradient style and other values, these are still selected according to the needs, and then click OK.

Being able to use PS is a basic skill, which can be used in life and work, and PS is almost a software that young Fengyan people will use. PS The use method is not complicated, take a look at the tutorial, and then practice a few more times, and you can basically master it. Because many people learn PS mainly based on self-study, for this reason, PS has also launched a self-study book, learning the drawing function against the sky, which can help you improve your drawing efficiency.

Tutorial to make a metallic background with PS.

1. PS open, create a new document, the background is white, use the [Brush Tool] to smear black and paint casually and sell it silver.

2. Use Liquify to execute: [Filter] - [Liquify] - [Forward Transform Tool] to draw at will.

3. Use [Gradual Silver Fight Imperial Mapping] to open the gradient by clicking on the small sun and moon below the layer, and adjust the color of the metal by yourself.

4. The picture is a little saturated enough, you can add natural saturation to it, and the effect is complete.

The above is the "tutorial to make a metallic background with ps", you can follow the tutorial to operate it, pay attention to other articles, learn ps together, and click this link to learn more about the ps tutorial: