When the computer is turned on, it always prompts The input signal is out of range and adjusted to

When the computer is turned on, it always prompts "The input signal is out of range Adjust to 1600*900" is that the refresh rate is out of the frequency range of the monitor, so we can reset it. The workaround is:

1. First of all, you need to right-click to select Preferences.

2. Next, you need to select the screen resolution in the options.

Click to enter. <>

4. Enter the monitor tab, and set the screen refresh rate to 60 Hz, after the setting is completed, click "Apply".

This problem is the configuration of your computer host, support resolution greater than 1600*900 this value, so your monitor has this prompt, resolutely do two, first, press the esc key, adjust the computer display resolution to 1600*900, and second, replace a monitor that supports high resolution (such as 4K monitor).

The graphics card supports, but the display does not have a resolution of 1600*900, turn the resolution down in the display properties, and the display should support it.

Out of the display range of the display, the display does not support, so high display resolution or refresh rate, in which the refresh rate and optimal resolution of the LCD display are fixed values. The resolution is determined according to your size, and the refresh rate is generally 60, beyond the fixed value of the display, it will not be displayed, and it will become out of range.

This is usually not possible, because you should choose the correct display resolution at most, unless there is no problem with your graphics card or graphics card driver.

When you turn on the computer, you continuously hit the F8 key of the keyboard, the menu appears and then enter VGA mode, change the resolution of the screen back on, press the F8 key when you boot up, and the advanced options menu appears in the release of your hand, and select to enter the "VGA mode" Enter to log in to the system.

After logging in: Right-click on the desktop to select Properties Settings Advanced Adapter List all modes Drag the scroll bar up and down, and click to select "1024*768, true color (32-bit), 75 Hz, LCD selection 60 Hz", click "OK", click "OK", click on the application OK, and finally restart the computer (or set the appropriate resolution yourself, win78 is the way to: right-click on the desktop to select screen resolution adjustment).

If it is not caused by the above problems, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain, if it is caused by hardware problems, it is recommended to overhaul it.

1.Try lowering the refresh rate of your monitor in 1600*900 mode, if it's 85 Hz then reduce it to 75 Hz to see if it works. Maybe it's because you've set the monitor refresh rate too high.

It is recommended to turn down the resolution and try it.

Click ESC to solve the problem, the most important thing is to see what the resolution is in your system.

The reason for this phenomenon is that the resolution or refresh rate of the monitor set in the computer system exceeds the maximum value that the monitor can display, and it cannot be displayed, so there is a prompt that the display input signal is out of range.

1. Shut down the computer, restart, press F8, and select Safe Mode.

2. In the safe mode, reset the resolution and refresh rate that the monitor can receive, and the refresh rate can be set to 60 Hz for general LCD monitors. The resolution is changed to: 1024*768.

3. Restart the computer, if it can be displayed normally, you can try to set a higher resolution again, if it can't be displayed, don't move, and the original resolution can be restored after 10 seconds.

Windows 10 system features.

2. Enter the text, and it will quickly retrieve the corresponding application, web page, program, etc. for you to quickly choose.

3. The WIN button on the left pops up a window that allows you to choose your own programs and UMP applications faster, and perform various operations such as power on/off.

4. Click the icon in the lower right corner, so that you can view the system notifications one by one, as well as the messages of mail and other software, and you can quickly set the switch of some functions.

6. The new file management interface allows you to quickly set up some operations and quickly switch to common settings.

The input signal is out of range because the screen resolution is insufficient, solution:

1. First of all, you need to right-click to select Preferences. As shown in the figure below:

2. Next, you need to select the screen resolution in the options. Click to enter. As shown in the figure below:

3. Enter the monitor tab, and set the screen refresh rate to 60 Hz, after the setting is completed, click "Apply". As shown in the figure below:

Hello dear, glad to answer for you, <>

The reason why the computer displays the input signal out of range is that the refresh rate is set outside the frequency range of the monitor. The solution for the computer to display the input signal out of range is as follows:

1. Click the start button in the lower left corner of the computer screen to enter the settings page. 2. Select the system in the opening settings interface, which contains the settings of the display options. 3. Select Advanced Display Settings in the interface that opens, and further set the refresh rate of the display.

4. In the advanced display settings, select the monitor you are using, and click the corresponding display adapter property settings. 5. Go to the Monitor tab and set the screen refresh rate to 60 Hz. 6. Apply the settings.

Thank you for your consultation, I hope this service can help you, you can click on my brother orange thick avatar to follow me, and then if you have any questions, Fang Wuyan will consult me again. I wish you a happy life, a happy family, good health, and all the best <>

Summary. Hello dear! We've helped you find the results:

The computer displays an input signal that is out of range, usually because the monitor cannot correctly recognize the signal output by the computer, resulting in a failure to display normally. Here are some common causes and solutions that can cause this error:1. Resolution setting error:

If the computer outputs a resolution that is out of the supported range of the monitor, it will result in an error message saying "The input signal is out of range". In this case, you can go into PC Safe Mode and reset the resolution. 2. The refresh frequency is set incorrectly

If the refresh rate of your computer's output is outside of the supported range of your monitor, it will also result in an error message saying "Input signal is out of range". In this case, you can go into PC Safe Mode and reset the refresh rate. 3. Display connection problems:

If the monitor is not properly connected to the computer, it will also result in an error message saying "The input signal is out of range". In this case, you can check if the monitor connection is loose or damaged. 4. Graphics card problem:

If your computer's graphics card drivers are not installed or updated correctly, or if there is a problem with the graphics card itself, it can also result in an "Input signal out of range" error message. In this case, you can try updating or reinstalling the graphics drivers, or replacing the graphics card.

Hello dear! Helped you find the result: The computer displays the input signal out of range, usually because the monitor cannot correctly recognize the output signal of the computer, resulting in the failure to display normally.

Here are some common causes and solutions that may cause this error: 1. The resolution of the server is set incorrectly: If the resolution output by the computer is beyond the support range of the monitor, it will cause the error message "The input signal is out of range".

In this case, you can enter the full mode of the computer and reset the resolution. 2. The refresh rate is set incorrectly: If the refresh rate output of the computer is beyond the support range of the monitor, it will also cause the error prompt of "the input signal is out of range".

In this case, you can go into PC Safe Mode and reset the refresh rate. 3. Display connection problem: If the monitor is not properly connected to the computer, it will also cause the error prompt of "the input signal is out of range".

In this case, you can check if the monitor connection is loose or damaged. 4. Graphics card problems: If the computer's graphics card driver is not installed or updated correctly, or the graphics card itself is known to have a problem, it will also lead to an error message of "the input signal is out of range".

In this case, you can try updating or reinstalling the graphics drivers, or replacing the graphics card.

The computer shows that the input signal is out of range.

Can you speak.

The computer displays an input signal that is out of range, which may be caused by the following reasons: the wrong resolution setting, the wrong refresh rate setting, the monitor connection, and the graphics card.

The solution is to do what I said, just do it, pro.

Analysis: When the screen resolution and refresh rate set by the system exceed the limits of the monitor's hardware parameters, the monitor often fails to display properly.

Processing: How to get the monitor back to normal, here's how:

1. Press F8 to select Safe Mode when booting up, and after entering the system, uninstall the graphics card driver through the Control Panel Device Manager.

2. Restart the computer and enter the system at a low resolution, the system will automatically detect and install the graphics card driver, and then set the appropriate screen resolution and refresh rate (the LCD monitor can generally be set to resolution: 1024*768, refresh rate: 60Hz, CRT monitor resolution is the same as above, refresh rate:

85hz）。