How to install a wall mounted advertising machine? How is the vertical advertising machine installed

1.The machine is laid flat on the outer packaging of the machine to prevent bumps or friction. Or the wall-mounted advertising machine of Rongsheng Xingda building faces the desktop, and a soft cushion is placed on the table to avoid scratching the glass surface.

2.Open the security door with the security key randomly distributed by Rongsheng Xingda wall-mounted advertising machine.

3.After the safety door is opened, use a screwdriver to remove the safety inner screws of the wall mount to facilitate the removal of the back plate of the wall mount. Then use your hand to push the wall mounting board of the wall-mounted advertising machine in the direction of the door lock, and the hanging plate can be removed.

4.Install a WiFi antenna to connect to the WiFi network, and the RJ45 network cable is also supported.

5.Use a level or a tape measure to measure the installation position and height and width of the wall-mounted advertising machine in the building, and mark the point with a pen. Make sure that the wall is able to carry the weight of the machine, preferably a solid wall.

On the wall of the drawn positioning hole, punch out the hole of 6 8 with a 6mm or 8mm drill bit (the number of holes is determined by the weight of the LCD advertising machine), and hang the positioning hole with a depth of 50mm.

6.Install the wall mount back plate to confirm the position of the hole on the wall, use expansion screws and steel nails to punch the hole, or tap to fix the back plate. Paste the wall-mounted board of the wall-mounted LCD advertising machine horizontally on the wall, and mark it with a marker in the place where the screwdriver needs to be fixed (4 6 grains under 22 inches, 6 8 grains above 42 inches).

7.After fixing the back plate of the wall-mounted advertising machine in the building, two people jointly lift the machine to the position of the fixed back plate, and fix several fixed clamp positions on the fuselage, and remember to lock the installation screws on the inside of the security door after fixing to prevent the machine from being removed at will. There are 4 hanging holes behind the advertising machine, aiming at the 4 hanging nails on the wall-mounted board, it is easy to hang from top to bottom, due to the weight relationship, the advertising machine above 26 inches is best installed by two people.

8.After fixing the backplate of the wall-mounted advertising machine of Rongsheng Xingda building, two people jointly lift the machine to the position of the fixed backplate, and fix several fixed card positions on the fuselage, and remember to lock the installation screws on the inside of the security door after fixing to prevent the machine from being removed at will. There are 4 hanging holes behind the advertising machine, aiming at the 4 hanging nails on the wall-mounted board, it is easy to hang from top to bottom, due to the weight relationship, the advertising machine above 26 inches is best installed by two people.

9.After hanging the LCD advertising machine on the wall, be sure to check whether it is stable and hung well. Plug in the power cord and turn on the power switch to power on the machine.

The installation steps of the wall-mounted advertising machine are as follows:

According to the size of the advertising machine and the wall, install the bracket. The installation of the bracket requires the use of expansion screws and fasteners to ensure that the bracket is secure.

Fix the advertising machine on the stand. In general, the advertising machine has a fixed hole position, and the advertising machine and the bracket are tightly fixed together by screws.

Adjust the angle. After installation, you can adjust the angle of the advertising machine as needed to ensure the best effect.

Your question is too professional and it's impossible for you to install it yourself after you buy it, the first step is to open the refrigerator door, the second part is to plug in the socket, and the third part is not like putting it in haha, you see, right?

Your question is too broad, what kind of vertical pose? What material? How much taller? Is there a lightbox? These must be laid out, otherwise there is no way to answer! There is a saying about how high and how many winds are prevented.

Step 1: First put the fuselage flat in a stable place and accurately embed the base into the fuselage. Step 2: Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened. Step 3: Raise the fuselage and the installation is complete.

Open the carton and take out part of the base and the independent base of the fuselage separately to check whether they are in good condition.

Step 1: First put the fuselage flat in a stable place and accurately embed the base into the fuselage. Step 2: Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened. Step 3: Raise the fuselage and the installation is complete.

"Installation steps of vertical advertising machine:

Step 1: Unpack and take out the accessories, including screws and hex screwdrivers.

Step 2: Take out the vertical LCD advertising machine and place it horizontally, and then align the base with the screw holes of the fuselage.

Step 3: Tighten the 12 screws.

Step 4: Put the fuselage in the right, then power on and turn it on. "

There are two ways to install advertising machines. One is wall-mounted and the other is floor-mounted. The specific installation method is different.

Wall-mounted advertising machine installation method: first remove the wall mounting board on the back of the machine, fix the wall mounting board on the wall with expansion screws, or install it on the hanger, and then the machine is OK.

Floor-mounted advertising machine installation method: usually divided into the fuselage part and the base part, advertising machine manufacturers are equipped with screws and hexagons.

Use hexagon and screws to fix the base part of the machine and the body part together, and you're good to go.

If you still don't know how to do it, you can ask the manufacturer who bought it at that time.

1. The load-bearing capacity of the installation wall.

The so-called wall hanging mostly refers to hanging on the wall, which has strict requirements for the load-bearing capacity of the wall. Gao Zhen thinks that when you purchase a wall-mounted advertising machine, you must consider this, only solid bricks, concrete and other high-strength walls can be installed wall-mounted advertising machine. 2. The bracket should be selected to be the wall-mounted advertising machine bracket on the market at present, which is mainly divided into adjustable angle hanger and fixed angle hanger, and it is very important to choose a suitable wall-mounted advertising machine bracket, and it is also necessary to consider whether the bracket is easy to disassemble and easy to maintain after installation.

3. The environment should be dry.

The internal structure of the wall-mounted advertising machine is electronic components and is afraid of water, so the installation position must be dry. In addition, it should also be kept away from strong electricity and strong electromagnetic field objects that are easy to interfere with advertising machines, such as electromagnetic appliances, mobile phones, etc.

Wall-mounted advertising machine as one of the advertising machine, and different from the simple placement of the vertical advertising machine, it needs to be more stable on the wall, so that the advertising machine can be better used, it involves the installation environment, installation position, bracket load-bearing, load-bearing wall conditions and other issues, so the wall-mounted advertising machine must master the installation skills when installing, in order to ensure that it can be used normally. This article will answer the questions that should be paid attention to when installing a wall-mounted advertising machine?

1. The wall should be firm.

The installation of wall-mounted advertising machine has strict requirements for the firmness of the wall, and users should first check whether the wall of the installation location is firm before purchasing the wall-mounted advertising machine, and whether it can reach the weight of the wall-mounted advertising machine. The wall-mounted advertising machine is best installed on the wall with solid bricks, concrete and other high strength, if for the sake of appearance, installed on the wooden wall, you may wish to take measures to strengthen the support in advance.

In addition, when the user buys the wall-mounted advertising machine, it is necessary to understand that the bearing capacity of the installation surface should be guaranteed to be not less than 4 times the actual load capacity of the advertising machine, and the advertising machine should not be dumped when it is tilted back and forth 10 ° after installation.

2. The environment should not be humid.

Since many LCD screen panels do not have the function of waterproof, the wall-mounted advertising machine should not be placed in a humid environment for a long time. If the environment is humid, no matter how good the LCD advertising machine is, it will damage the advertising machine equipment because of the perennial close to moisture.

3. Avoid the influence of strong electricity.

Wall-mounted advertising machine should try to avoid the influence of strong electricity and strong electromagnetic field objects, such as electromagnetic appliances, mobile phones and other electrical appliances that can be moved at will should be kept away as much as possible, and other large household appliances should not be placed near the advertising machine.

4. The bracket should be selected.

The installation requirements of the wall-mounted advertising machine have reached the first three points, and the most important one is to choose a suitable wall-mounted advertising machine bracket.

1) First of all, figure out the classification of brackets: At present, brackets on the market are mainly divided into adjustable angle hangers and fixed angle hangers.

2) Secondly, easy to disassemble: the advertising machine bracket on the wall should ensure that the advertising machine is easy to maintain and repair after installation, and it is easy to disassemble without damaging the installation surface and mounting frame.

3) When buying a wall-mounted advertising machine bracket, be sure to check whether the installation bracket includes the wall connection part, the product connection part, the fastener part, the installation diagram and the operation instructions, and it must meet the international VESA organization FDMI standards.

To choose a wall-mounted signage bracket, it is very important to choose a suitable wall-mounted digital signage bracket. First of all, figure out the classification of brackets, the current market brackets are mainly divided into adjustable angle hangers and fixed angle hangers. Secondly, the digital signage wall hanger should ensure that the maintenance and repair of the digital signage machine after installation are convenient, and it is easy to disassemble without damaging the installation surface and mounting frame.

When buying a wall mounting bracket, be sure to check whether the mounting bracket includes a wall connection part, a product connection part, a fastener part, an installation diagram and operating instructions, and it must meet the international VESA organization FDMI standards. Wall-mounted digital signage is reasonably installed through the above steps, which not only saves space, but also becomes a decoration that decorates the personalized living space.