What is the method to fill the leakage of the house, and what can be used to fill the leakage of the

The roof of the farmer's uncle is cracked and leaking, and the new waterproof material is used to paint, the construction is simple, and the effect is good.

The materials used to make up for leaks in the house are as follows:

1. Polyurethane waterproof coating: This water material is one of the most common ones in us, with good physical properties, strong adhesion, and can be cured in a humid environment at room temperature.

2. Composite waterproof material: composite waterproof material is a waterproof material composed of organic emulsion and inorganic powder mixed with acrylic ester, which can be coated on the top floor of the house to form a film similar to rubber, with high elasticity and durability, strong ultraviolet resistance, and can also be adjusted to various colors.

3. Cement-based permeable crystalline waterproof material: It is made of Portland cement and quartz sand mixed with active chemical materials.

4. Acrylate material: It is mixed by adding an appropriate amount of auxiliary reagent to pure propionic acid emulsion or pure propionate copolymer, which belongs to resin waterproof coating and has relatively little pollution.

5. Roof waterproof leakage repair material: asphalt waterproof coating glue plugging king.

6. Permeable nano waterproofing agent glue: bathroom tiles, exterior walls, roofs, and roofs can be filled.

7. Waterproof roof cracks: waterproof tape for coiled pipe mouths.

House leakage practices:

1. First of all, check the cause of water leakage in the house, and only when you know the cause of water leakage can you treat the problem. Some houses have a leak that can be detected quickly, while others are not easy to detect. First of all, the structure of the floor slab is inspected, and it may be that there is a problem with the floor slab that causes water leakage.

2. If the problem of water leakage in the house is that the construction of the upper and lower floors has damaged the waterproof layer, this is a very common problem, and our solution is to negotiate with the top of the floor to make up the waterproof layer.

3. The pipe will also cause the house to leak, because each floor in the floor must be connected to the pipe, it may be because there is a problem with the contact between the pipe and the floor, and if the contact between the pipe and the floor is not fully closed, then the house will leak.

Step 1: If there is a crack and the crack width is greater than 2mm, you need to fill the crack with cement mortar first. If there are no cracks or if the cracks are small, you can skip this step.

Step 2: Clean the roof without open water and try to avoid dust. Step 3:

After cleaning the roof, you can use 911 polyurethane waterproofing paint to paint the entire roof. Brush it twice and the waterproofing is basically done.

Under normal circumstances, the roof waterproofing layer is done before laying tiles or making a protective layer, and there are generally more cross-membrane waterproofing membranes, which has good performance. Water leaks are rare. Since it is a leak filling, it depends on whether it can be knocked off and redone, and it is recommended to redo it for waterproofing, but it is also possible to take grouting to fill the leakage or partially brush the waterproof coating, depending on the situation.

Construction points: 1. Base surface treatment: the base surface must be smooth, firm, clean, no clear water, no leakage, uneven and cracks must be leveled first, leakage must be plugged first, and the yin and yang angles should be made into arc angles;

2. Coating essentials: 1) Coated with rollers or brushes, according to the selected construction method, according to the order of laying the bottom layer and the lower coating, the non-woven fabric and the middle coating, and the upper coating; 2) If the paint (especially the primer) is applied, it should be stirred evenly at any time; 3) The coating should be as uniform as possible, and no local deposition should be allowed; 4) The time interval between each layer shall prevail as follows: the previous layer of coating film is dry and solid; 5) For the third construction method, the lower coating, non-woven fabric and middle coating must be applied continuously; 6) Each layer of coating must be taken according to the specified amount, and it should not be too thick or too thin.

How to repair roof leaks:

1 Traditional method of filling gaps.

If there are tiles on the surface of the building, then pry the tiles or floor tiles, then dig the waterproof layer, remake the new waterproof layer, and then re-lay the new floor tiles.

2 The latest method of filling the gap.

The traditional concept of building leakage is to fill the leakage. The latest waterproof leakage method is to abandon this traditional concept, waterproof layer leakage, do a good job of waterproof and leakage prevention outside the tile, as long as the outside tile surface layer is waterproof, the waterproof effect is the same.

The waterproof leakage treatment of the house is carried out according to different situations, and there are three kinds of roofs: one is cement concrete; the second is to lay an insulating layer on cement concrete (such as ordinary insulating bricks, or tiles); The third is the structure of star iron boron or the surface of other materials.

The traditional waterproof leakage repair is repaired by JS waterproof coating, K11, etc.; Or use asphalt and other waterproof materials; For cement concrete with large cracks, the initial stage is OK, and the time is slightly longer; As cracks in the cement face continue to develop, these materials will be destroyed and water leaks will continue to occur. That is, the reason for the repeated repairs and repeated water leaks that everyone encounters many times.

In order to achieve a long-term waterproof effect, please choose the BXHT super series waterproof material developed by Zhongshan Boxing Technology for repair. First of all, the leakage part is cleaned, and for the cracks that are larger (larger than that), use BXHT super waterproof adhesive for caulking repair, and then use BXHT super coating material for comprehensive coating. There is no need to apply a protective layer to the coating layer, and the coating layer can not age for up to 50 years.

Due to the different functions of the house, the degree of exposure in the environment is also different, and at the same time, the years of use are also different, so the severity of the water leakage problem shown by the house is also different. There are many ways to deal with house leakage, but the waterproof and leakage repair methods are different, and the treatment effect of house leakage is also different. In the face of a variety of different waterproof construction methods such as redoing the waterproof layer method, linoleum method, and plugging king, we must also "prescribe the right medicine" when determining which method to use to deal with the water leakage problem of the house.

The house waterproof leakage repair is divided into four parts, exterior wall waterproofing, roof waterproofing, basement waterproofing, and kitchen and bathroom waterproofing. Understand where the water leaks, find the source and the cause, and make good waterproof repairs.

Key points of construction of "Qinglong Waterproof Material".

1. Base surface treatment: the base surface must be smooth, firm, clean, no open water, no leakage, unevenness and cracks must be leveled first, leakage must be plugged first, and the yin and yang angles should be made into arc angles;

2. Coating essentials:

1) Coated with rollers or brushes, according to the selected construction method, according to the order of laying the bottom coat, the lower coating, the non-woven fabric, the middle coating, and the upper coating, it is completed layer by layer;

2) If the paint (especially the primer) is applied, it should be stirred evenly at any time;

3) The coating should be as uniform as possible, and no local deposition should be allowed;

4) The time interval between each layer shall prevail as follows: the previous layer of coating film is dry and solid;

5) For the third construction method, the lower coating, non-woven fabric and middle coating must be applied continuously;

6) Each layer of coating must be taken according to the specified amount, and it should not be too thick or too thin.

Let's take a look at the information on waterproofing technology.

The methods of repairing water leakage in houses include polyurethane waterproof coatings, composite waterproof materials, cement-based permeable crystalline waterproof materials, acrylic materials, and permeable nano waterproofing agent glue.

1. Polyurethane waterproof coating

This kind of water material is one of the most common in Japan, with good physical properties, strong adhesion, and can be cured in a humid environment at room temperature.

2. Composite waterproof material

Composite waterproof material is a waterproof material made of organic emulsion and inorganic powder composed of acrylic esters, which can be coated on the top floor of the house to form a film similar to the bad glue of rubber pants, with high elasticity and durability, strong UV resistance, and can also be adjusted to various colors.

3. The cement-based permeable crystalline waterproof material is pure

It is made of Portland cement and quartz sand mixed with active chemical materials.

4. Acrylic material

It is mixed with an appropriate amount of auxiliary reagent in pure propionic acid emulsion or pure propionate copolymer, which belongs to resin waterproof coating and has relatively little pollution.

Penetrating nano waterproofing adhesive

Bathroom tiles, exterior walls, roofs, and roofs can all be filled.

Water leaks in a house can be caused by many reasons, such as cracked pipes, damaged roofs, or leaking walls, etc. Here are some possible workarounds: Check the cause of the water leak:

The first step is to find out the cause of the water leak, which can help determine the best way to fix it. You can inspect roofs, water pipes, walls, and floors to determine where and why the leak is occurring. Repair the roof:

If the leak is due to a roof problem, cracks, cracks, or missing parts of the roof need to be found and repaired. You can use roof patches, sealants, or rain gutters to fill leaks. Replace broken pipes:

If the leak is due to a broken pipe, the broken part needs to be located and replaced or repaired. If it is a serious water leak, it is best to have a professional repair it. Patch up the walls:

If the leak is caused by a leak in the wall, the leaking part needs to be found and repaired. You can use patches and sealants to patch holes and cracks. Take precautions:

Once the leak is resolved, it's a good idea to take precautions to avoid the same problem happening again. Such as regularly inspecting roofs and water pipes to ensure they are in good condition, and regularly cleaning and maintaining drainage systems to prevent problems such as clogging. In short, it is necessary to judge and deal with the leak according to the specific situation, and if you are not sure how to deal with it, it is best to ask a professional to repair it.

Hello dear, glad to answer for you. Housing leakage repair method 1, find out the water leakage part, mainly in the bathroom, window sill, non-load-bearing wall and floor plate of the four parts of the teasing position; 2. Analyze the cause of water leakage, the leakage in the bathroom is very likely to be caused by the failure of the waterproof layer and the rupture of the water pipe, and the leakage of the window sill is mostly caused by cracks; 3. Remedy, remedy according to the water leakage, redo the waterproof layer, replace the pipeline, and fill the gap seal. 2. Who is responsible for water leakage in the house; 1. Responsibilities of the developer:

If there is a non-human leakage during the warranty period, the developer needs to bear full responsibility, because in the quality warranty measures for housing construction projects, there are provisions that the roof waterproof project, the bathroom with waterproof requirements, and the exterior wall are guaranteed to prevent leakage, and the developer is responsible for any problems within 5 years. 2. Fair responsibility: the use of the house has exceeded the warranty period, but the house has water leakage, and it is not caused by human reasons, such as the natural aging of the waterproof layer, etc., at this time, the maintenance needs to be fair and responsible according to the realization of the situation, and the owner and the developer or the property are half a person.

3. Responsibility of the property: Under the negligent management of the property, the water leakage is not solved in time, but leads to the aggravation of the water leakage and the expansion of losses, etc., and the property needs to be held responsible. 4. Owner's Responsibility:

If the water leakage in the house is caused by man-made, basically whoever did it will be responsible, of course, most of it is caused by the owner himself in use, so the owner is responsible for it. Kiss <>

The above is my answer to this question, if you think I am very satisfied, please pay attention to me and not get lost in the future, and then please do a little manual in the lower right corner, give me a like! Welcome to consult again <>