I don t know if the wifi password router can be connected

The computer is wired, and then the password is changed.

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (the password should be 8-16, and the alphanumeric combination can be used);

5. After setting the password, click Save to prompt restart;

6. Click "Restart Router" in "System Tools" to restart the router.

Here's how to check the wifi password from the router:

IE browser opens, enter or, open the login screen.

Login name admin, password admin (this is a general router, some special ones may not be this username or password, but the back of the router will generally have a login name or password).

Once you're in your router, tap on Wireless Settings on the left.

In the drop-down menu on the left, click Wireless Security Settings.

The string of numbers after the PSK password in the middle on the right is the WiFi password of the current route.

If you don't know the wifi password, how to connect to wifi The steps are as follows:

1. On the settings page, click on the wireless and network celery in the list.

2. On the Wireless & Networks page, click WLAN.

3. After entering the WLAN page, click on the connected WiFi.

4. Click *** on the page.

There are usually two ways to connect to a wifi that you don't know the password:

Method 1: Use the WPS button.

Some routers support WPS, which includes password-agnostic connectivity. With the WPS button, the device can connect directly to the WiFi network without the need to enter a password. Here are the steps:

1.Check if your router supports WPS functionality.

3.If the router supports the WPS feature, the WPS logo will usually appear on the Wi-Fi interface. (usually behind the router).

4.Disconnect from Wi-Fi. Press the WPS button on the router for 5 seconds to connect to the wireless network.

Method 2: Use an Android phone app.

There are a number of apps that can be used to connect to protected WiFi networks in the Inson Store. For example, the WiFi Connectivity Showcase app generates a default password when connecting to a protected WiFi network. In addition, the WiFi WPS WPA checker app can be used to guess secure WiFi passwords.

Please note that using this method may violate the online privacy of others, so please use it in accordance with the law.

It is important to note that attempting to connect to someone else's WiFi may not require the owner's permission and must be subject to the law. In our daily life, it is recommended to use our own legally authorized wifi for Internet access.

Find the administrator of the router or wifi hotspot and ask for the password; 2.Reset the router or wifi hotspot to remove the password; 3.Use the WPS button or PIN code to connect to WiFi.

Here are the detailed steps for these methods:Find the administrator to exchange wifi password:1

Make sure you are connected to a WiFi network; 2.Open your browser; 3.Enter the IP address of your router in the address bar of your browser.

Usually, the IP address of the router is or; 4.Enter the management account and password; 5.On your router configuration page, look for the wifi password and transcribe it.

Reset your router or hotspot to remove the password1Find the reset button on the back or bottom of your router or wifi hotspot; 2.Using a needle or other sharp tool, press and hold the reset button for about 15 seconds; 3.

Release the button and wait for the router or wifi hotspot to restart; 4.Connect your device to a passwordless wifi hotspot. Use the WPS function to connect to WiFi1

Make sure that the router or wifi hotspot supports the WPS feature. Usually, you can check the document or the back of your router to see if there is a WPS button; 2.Tap the WPS button on your device or press the WPS button on your router; 3.

Within 30 seconds, press the WPS button on the router at the same time; 4.The device will automatically connect to the wifi and does not require a password. If these methods determine that they don't resolve the issue, you'll need to choose a different way to connect to your network.

The reasons for these problems may be due to the burning of the stool for:1Forgot wifi password; 2.

Unable to find administrator and password; 3.The router cannot be reached. If the issue cannot be resolved, contact your network service provider or router manufacturer for further support and guidance.