The bathroom is renovated without removing the tiles, and can the bathroom tiles be renovated direct

If the bathroom is not dismantled, the old floor should be polluted, and the main thing is to clean and remove stains.

1. Cleaning and refurbishment: the black edge can be washed with banana water; Floor tiles with little damage can be waxed, but the ground is too slippery after completion.

2. Grinding and refurbishment: For the uneven wear of the whole brick, it can be made uniform and new through grinding, but the pattern cannot be retained.

3. Replace local bricks, for only serious local damage, knock the tiles to be replaced, and try to replace them with bricks with the same color number, so it is recommended to leave a small amount of tiles for future repair.

4. Reinstall the floor tiles, for the situation that it is too worn; You can use tile adhesive to re-attach new bricks on top of the old bricks.

There are special tile refurbishment materials, such as tile surface treatments, floor tiles, and mosaic binders, which can be applied directly to the tiles.

Then lay the new tiles on the top, saving the time and energy of eradicating the old tiles in the middle, or if the tiles are not damaged, but there is a problem with the joints between the floor tiles, then you only need to remove all the floor tile joints and redo them.

If the age of the house is relatively old and the waterproofing of the bathroom is not good, it is recommended to dismantle all the bathrooms and redecorate and renovate them.

Bathroom renovation tile steps.

1. Delete the old bricks.

If the enamel of the old floor tiles.

Damaged by wear and tear, or where many places have been emptied or even contaminated with stains, in general, simple repairs will not achieve anything. * It is better to remove the floor tiles. Replacement.

However, there is a problem here, which is more troublesome because it is more difficult to replace those damaged floor tiles, because these floor tiles were laid many years ago, and it is difficult to find the same color, model, model number.

2. Directly lay new floor tiles.

With the development and innovation of technology, some things are becoming easier and simpler, just as there are special wall and floor renovation materials already on the market. Like floor tile surface treatment agent, floor tile, inlay adhesive, these materials can be directly applied to the coating of floor tiles, and then the new floor tiles are laid on top, saving time and energy to remove the old ground in the middle.

Tile renovation. 3. Keep the old tiles.

The floor tiles are largely undamaged, but there are problems with the joints between the tiles. Faced with this situation, it is only necessary to remove all the floor tiles and scrape them off. Because in the process of long-term use, the floor tiles will breed a large number of bacteria and dirt, these must be removed, otherwise it will not only affect the beauty of the floor, but also endanger health.

4. Old floor tiles on wooden floors.

If you don't want to continue using the floor tiles and want to lay the old floor on the old floor, you need to clean the original floor tiles first. Otherwise, the floor tiles will become a place for the reproduction of microorganisms and bacteria, which will be very detrimental to the future living environment and family health.

Tile renovation.

No, if the original tile is not dismantled, directly on the top of the new bricks, because the surface of the tile is smooth, the cement concrete can not grasp the tile, after a long time, it will be easy to rise, resulting in the new tile activity is easy to fall off. Therefore, before laying new bricks, the old bricks must be disposed of.

If the bathroom tiles themselves are still relatively good, there are no cracks, damage, hollowing, etc., but the tiles look old due to the deposition of water alkali for a long time, you don't need to dismantle the floor tiles, as long as you do a thorough cleaning of the floor tiles. Apply the toilet cleaner to the floor tiles first, pay attention not to stay for too long, and let it stand for about 10 minutes to rinse with water. Because toilet cleaning liquid is highly corrosive, wear gloves and a mask during cleaning.

If the edges are dark and toilet cleaner has no effect, it is recommended to wash with banana water.

2. Grinding and refurbishment.

Some floor tiles have uneven degree of wear, and the floor tiles can be made more uniform and consistent by polishing the form of floor tiles, but the patterns on them will disappear after polishing, and the aesthetics will be affected to a certain extent. If the treatment loss of the floor tiles is relatively small, but it does not look bright enough, you can also wax it to restore the previous luster.

This seems to be possible.

There are four ways to renovate bathroom tiles without smashing: wiping with banana water, sanding with a grinder, painting and repasting the surface.

1. Wipe with banana water. Wipe down the surface of the wall tiles and then clean the gaps with banana water so that the tiles can return to their former glory.

2. Polishing with a grinder. If the bathroom is covered with full-body tiles, you can use a sander to polish them, which can change the heart of the tiles, but may not retain the original pattern.

3. Varnishing. For some old tiles, they will fade after a long time, and you can recolor the tiles with a special tile paint, so that you don't have to smash the tiles anymore. However, be careful not to penetrate the crevices when painting the color.

Wait until the surface of the tile is dry, and then redo the seam.

Choose a color that matches the color of the tile, which can also make the bathroom tile look new and bring a different feeling.

4. The surface is heavy and leaky. Clean the tiles first, and then re-apply a new layer of tiles on the surface, it is better to choose tile adhesive, because it will bond better, or to lay a floor on the surface, but be careful to choose a waterproof floor.

What kind of tiles to choose for the bathroom?

1. Because of the long-term water use in the bathroom, it is relatively humid, and we need to pay attention to choosing dirt-resistant tiles with waterproof performance when choosing tiles. To choose tiles with a relatively low water absorption, the density is slightly higher, so you can choose glazed tiles.

2. At the same time, it is also necessary to pay attention to the choice of anti-slip performance, which is very important for the elderly and children, so you can choose a matte anti-slip brick, which has a relatively high safety factor.

The surface treatment agent of the tile and the adhesive of ceramic tile and mosaic are widely used in the European market, and the new ceramic tiles and mosaics can be directly pasted on the basis of not eradicating the old ceramic tile base layer;

Or use the surface treatment agent of the brick to plaster the base layer, and the putty can be directly painted after scraping the putty. This method of rapid renovation and paving will not damage the base of the old house, reduce the decoration cost and shorten the construction period, and also avoid the problem of garbage and noise in the renovation of the old house. Naturally it is also suitable for toilet tile renovation.

First, first of all, when the decoration owner dismantles and modifies the bathroom wall tiles, the wires and lamps should be removed to avoid damage to electrical appliances in the later stage, circuit leakage, and electric shock, and then use the nearest socket outside the bathroom to install auxiliary supplies, and do not use the socket of the bathroom.

Second, then remove the bathroom supplies in the bathroom decoration. Before dismantling and modifying the wall tiles in the bathroom, the wash basin, toilet, and shower head should be removed. Bathtubs, hooks, cabinets, and other supplies are removed to clear the way.

3. Remove the ceiling first, if you remove the bathroom wall first, it will cause the ceiling to fall suddenly, causing health hazards to the workers' bodies. Finally, the bathroom wall was demolished, and the demolition should be carried out from the bottom up.

Yes, as long as the space in the home is high.

You can use the best tough tile adhesive in tile adhesive, and stick the bricks on the bricks as long as you follow the product instructions to stick the new tiles very firmly. (However, it will raise the ground by a few centimeters.) ）

In particular, it is recommended that this kind of tough tile adhesive still has a certain technical content and cost accounting, and it is not a general waterproof manufacturer that can produce and provide products with real performance.

<> you can do a thorough cleaning of the tiles, apply the toilet cleaner to the tiles, let it stand for about 10 minutes to clean the toilet cleaner with water, and be careful not to touch the toilet cleaner with your hands. You can also polish the old tiles, and after polishing, put some wax hall fingers on the tiles, and you can also restore the previous luster. It is also possible to clean the stains and dust on the surface of the tiles and lay new tiles directly on top of the old tiles. Tease the scum.