How to renovate the old wooden door in the bathroom How to renovate the old bathroom How to renovate

First, the selection of wooden door repair scheme.

Wooden doors are mostly used as interior doors, and their appearance has a great impact on the effect of the whole home. For the renovation of wooden doors, different solutions need to be taken for different damage situations.

1. The surface layer of the wooden door is damaged.

If the wooden door is only slightly damaged by scratches and stains that are difficult to erase, then you can consider directly painting and covering it. The finished door is generally waxed, first need to sandpaper the wooden door to improve the adhesion of the paint, and then directly brush the primer and topcoat.

2. The base of the wooden door is damaged.

If there is damage to the base of the door, such as cracks or potholes in one of the pieces. Then compared to the damage of the surface layer, the treatment method is slightly more complicated, that is, before painting and covering, it is necessary to fill the damaged place with putty and fill it. Then sandpaper is sanded, and then primer and topcoat are painted.

Second, the wooden door renovation precautions.

It should be noted that if you are renovating wooden doors, the longer it takes for the first paint to be sprayed, the better. This is because the original substrate has dried thoroughly when it is refurbished, so it will not affect the result of repainting.

1. Select supporting products when deploying.

When applying wood paint, if you choose water-based wood paint, you only need to dilute it with water in proportion. If nitro paint and polyurethane paint are selected, relevant curing agents and diluents need to be added, which must be blended in strict accordance with the fixed ratio.

Therefore, it is best to have the guidance of professionals in the construction process of nitro paint and polyurethane paint. Strictly according to the proportion and choose the matching diluent, curing agent, so as not to cause problems such as biting the bottom and wrinkling.

2. Use fine sandpaper for grinding.

When constructing, you should use fine sandpaper instead of coarse sandpaper for quick drawings. The grinding is more delicate, and the adhesion of the paint film is better.

3. Allow time for drying.

Generally speaking, the spray paint brush twice primer and three topcoats can be, but each time it takes 4-6 hours to brush the second paint, workers in order to draw fast, every 1-2 hours to brush the second paint, the paint film is not dry, affecting the final effect.

4. It is best to take down the wooden door for construction.

Wooden door renovation is mostly carried out indoors, and it is best to remove the door and put it in a special room for spraying. First, there is no dust, reducing environmental pollution; Second, you can see the front and back of the door very clearly. If you spray directly on the door, it is easy to produce fog when spraying, which affects the line of sight and thus affects the spraying effect.

5. Differential treatment of remaining paint.

After the water-based wood paint is used, the remaining paint can be stored in a cool place for further preservation in case it is needed. Nitro paint and polyurethane paint can only be used once due to the addition of curing agents and thinners, and the remaining paint can only be disposed of. At the same time, after the construction is completed, the discarded paint should be properly disposed of, and attention should be paid to cleaning the tools in time.

1. Directly paste a thin layer of new tiles on the old tiles in the bathroom, there are special thin tiles on the market for sale, which can be directly covered on the old tiles, and do not need to be replaced, saving a lot of time and cost.

2. If you are more particular, you can also pry off all the original tiles, redo waterproofing, buy tiles, and then pave them.

The wooden door of the room is a very important part of home decoration, but with the passage of time, the access control has experienced the erosion of natural factors such as wind and sun, rain and wind, as well as human negligence and other reasons, and has become old and damaged. However, there is no need to buy a brand new door, as we can renovate the old door to give it a new look.

First of all, we need to prepare the necessary tools and materials, such as sandpaper, paint brushes, paint, etc. Subsequently, sandpaper is used to sand the façade to remove old paint and surface damage, leaving the wood surface smooth and fine. This process is very important because it affects the core of the pin in the final paint.

Next, choose the right color, brush the paint evenly on the door, and follow the principle that each layer of paint should be completely dry before brushing the next. It is best to apply three to four times to ensure the coating thickness, coating effect and stain resistance of the surface of the wooden door.

If your old door smells bad or smoky, you can use some Cleaner to clean it. For hardware such as locks, handles, etc., it can be painted with baking or spray paint to harmonize the color of the wooden door.

In addition, before painting, it is recommended to check whether the door frame is firm and whether the door gap is wide and narrow and symmetrical. Repairs can be made and the use of the door can be improved. This will provide a longer service life and a better appearance effect for the wooden door.

In conclusion, by renovating an old wooden door, we can transform it into a brand new one, while also saving money on buying a new door. As long as we master the skills of painting, choose the right materials, and comprehensively sort out the problems of the door, we can make the old door bright, tidy, beautiful, and glow with new vitality.