CNC lathe operation steps. Speaking from the boot. I give high marks to the full. 50

There are many kinds of CNC lathes, and different machines have different operations, and I can only say that they have a common step:

1. Before starting the machine, some safety checks should be done, such as whether there is a workpiece on the chuck, whether the supporting plate is in a safe position, and whether there is a possibility of short circuit in the wire.

2. After the inspection, open the external power switch of the machine, (the fan switch with a pneumatic device is inflated first, and then the next step is safer after the inflation is completed) and then open the internal power switch of the machine, (if it is not turned on for a long time, it is best to open the preheating for half an hour) and then turn on the system power.

3. After the power is turned on, the first thing is to do the zero operation and establish the coordinate system of the machine tool.

The first three parts are the preparation work before the machining of the machine tool, and the following are the steps of processing:

4. Prepare parts blanks, cutters, measuring tools, tools, etc. for processing.

5. Write the program according to the processing technology and input it into the system. And idling the program to check for errors.

6. Install the knife and align the knife.

7. Process according to the program.

8. Measure the size after processing.

The steps here are arranged according to the idea of safety first, processing later.

I don't know your specific CNC lathe model, which key to press or something, you should know yourself.

First of all: turn on the power switch, there is a knob behind the bed, and hit the ON gear;

Second: Check whether the cooling fan is turned on (generally the fan will work as soon as the power is on) Third: Press the start button and wait for the start-up, fourth: The start-up is completed, turn up the emergency stop button, press the reset, and then the alarm will be released.

Fifth: check the hydraulic oil level, generally there is a detection port in the oil tank in the main transmission cabinet, or there is a check port at the gear shift.

The lubricating oil tank does not need to be checked, and the oil level will automatically alarm when it is low).

Sixth: machine tool back to zero operation (some machine tools do not need to return to zero operation) just a few steps, if there is anything else we don't understand, we can **.

They're clear enough! I learned it too! Ha ha.

Learn to clamp - know the measuring tool - read the drawings - tool setting - make up the knife - back CNC machine tool **.

The operation steps of the CNC lathe are as follows:

1. Start the machine tool and CNC system: turn on the power supply of the CNC lathe, and start the CNC system according to the operation steps on the machine tool manual. Wait for the system self-test and initialization to complete.

2. Load the program and set the workpiece coordinate system: use the relevant software to transmit the processing program to the CNC system. After confirming that the program is loaded successfully, the coordinate system of the workpiece is set, including determining the initial point, the origin of the workpiece and the reference point.

3. Perform automatic machining: select the automatic mode in the CNC system and start to execute the processing program. The CNC lathe will automatically perform the machining operation according to the path and parameters specified by the program. The operator needs to observe the process to make sure everything is working properly.

The development of CNC lathes is in the course of a fierce gear:

Since the advent of CNC lathes, it has undergone considerable development. With the advancement of science and technology and the continuous improvement of manufacturing technology, CNC lathes have achieved significant improvements in accuracy, efficiency and flexibility.

In terms of accuracy, the CNC lathe adopts a high-precision servo control system and a precise measuring device, which can achieve micron-level machining accuracy. At the same time, the advanced automatic compensation technology is applied, which effectively reduces the error caused by tool wear and machine tool deformation, and ensures the stability of machining quality.

In terms of efficiency, the CNC lathe adopts a high-speed spindle drive and a rapid feed system, which greatly shortens the machining cycle. Combined with optimized toolpath planning and efficient cutting data setting, the machining efficiency and production capacity are improved, and the machining cost is reduced.

CNC lathes have also made breakthroughs in flexibility and automation. Modern CNC systems support multi-axis control and complex curve machining, which can complete the machining of parts of various shapes. At the same time, CNC lathes are also combined with other intelligent equipment and automated production lines to achieve automated production and flexible manufacturing, and improve the flexibility and adaptability of production.

With the development of industrial Internet and artificial intelligence technology, CNC lathes are gradually developing in the direction of intelligence. Through the connection and data analysis with the cloud platform, equipment status monitoring, remote operation and intelligent optimization are realized. At the same time, with the help of machine learning and adaptive control algorithms, fault ** and autonomous adjustment are strengthened, which further improves production efficiency and quality stability.