Why does my 4M broadband become very stuck with the router?

Updated on technology 2024-03-31
11 answers
  1. Anonymous users2024-02-07

    Is the router limiting the bandwidth of the port?

  2. Anonymous users2024-02-06

    Routing allocates bandwidth based on the number of connected computers, and if the number of connected computers or phones doesn't change, the speed won't slow down much.

    A computer occupies access to the Internet. If you find that the Internet speed is slow, it is commonly caused by the following reasons.

    1) Worm attacks cause a slowdown in internet speed.

    After your computer is connected to the Internet, the worm will keep sending emails through e-mail, causing network congestion, slowing down the network speed, and paralyzing the LAN if you are a LAN user. Therefore, it is important to upgrade the antivirus software used, update the operating system patches, uninstall unnecessary services, close unnecessary ports, improve the security and reliability of the system, and prevent worms.

    2) The network speed is slowed down due to too many firewalls.

    Some users often install two or more firewall software on the system for security, but they don't know that the firewall will inspect every packet sent or received on the network, and multiple firewalls will consume resources and may cause conflicts between software. Just keep a powerful firewall.

    3) The network speed slows down due to insufficient system resources.

    Due to loading too many applications, the system resources are insufficient, which affects the system performance and leads to slow Internet speed. Try closing some useless programs or leaving enough cache space on the system disk.

    4) The network speed is slowed down due to overheating or other faults of the adsl moden.

    If the internet speed slows down after a long period of continuous surfing, you can try to turn off the modon for a few seconds and then turn it back on, or change to another modon test.

    5) There are too many broadband users in the community, and the network speed is slowed down during peak hours.

    Some users actually use the cell to share optical fiber access, the whole cell shares this optical fiber, when there are not many users, the network speed is very fast, but if there are too many users in the community, the network speed will slow down during the peak hours of Internet access.

  3. Anonymous users2024-02-05

    Wireless router and network cable an effect, not slow at all, the general wireless router transmission speed is about 300m per second, for 500kb no pressure, wireless convenience, both can use network cable, can also use wireless, is usually pay attention to protection, the password is stronger, in case of rubbing the net, as for the brand in general, go to ** search a bunch, I bought the 90 yuan have been used for almost 1 year, it is best to buy the kind with antenna, strong penetration.

  4. Anonymous users2024-02-04

    1. In the current network use environment, 100m and 50m broadband have become more and more popular, and 20m and 12m have been the regular installation choices of many users, so 4m broadband is still used, which is indeed a bit of a lack of bandwidth.

    2. You can turn off the router's firewall and various filtering functions to optimize the routing performance accordingly. These routing options can be ignored by users who already have a security program installed on their computer system.

    M broadband does not refer to "4 megabytes of broadband", this M refers to bandwidth Mbps, not the bandwidth of storage units, which is about 512 KBS when converted into storage units. If there are multiple Internet devices under the same router at the same time, then the slowness is also a source.

    The performance of the hardware is here, because of the constraints of broadband bandwidth, no matter how it is optimized, it is impossible to achieve an ideal speed, and the only way is to upgrade high-bandwidth services.

  5. Anonymous users2024-02-03

    One is the signal strength of the router, and the other is the wireless protocol, please check whether the protocol currently used by your router is 11b, and see if you can change it to other protocols.

  6. Anonymous users2024-02-02

    Wireless speed is related to the size of the signal, you haven't seen 0k, it's not surprising if you have seen it.

  7. Anonymous users2024-02-01

    The router is not very stable, it is better to choose TP-link.

  8. Anonymous users2024-01-31

    Please tell us about the specific model of your router. And Netcom is now Unicom. Why do you say what is the difference between Netcom and Unicom?

  9. Anonymous users2024-01-30

    It may be network congestion! Or you go to the router configuration page and take a look to see which settings are problematic!

  10. Anonymous users2024-01-29

    Are M and 2M all Tietong networks?

    Generally speaking, the latency of the domestic network of telecom cover is relatively small, after all, most of the servers are on the telecom network;

    2. The original notebook is not wired to connect to the cat, playing games, and the delay of wired connection is much smaller than that of wireless connection. It doesn't matter if it's 300m or 450m.

    3. Do not have policies such as IP filtering in the router, which will increase the latency.

    I hope Min Kuan helps.

  11. Anonymous users2024-01-28

    According to your description, your computer is used a bit more, and four megabytes of Internet speed broadband can be used by one computer, and two computers are relatively a little stuck. According to your situation, you can log in to the online business hall of Anhui Telecom to handle the 20 trillion broadband business of smart home, which is very affordable, and you can also send 3 telecom mobile phone numbers and mobile phones, which is very affordable. You can log in to the online business hall of Anhui Telecom for a more detailed understanding.

    If you need to pay phone bills, buy mobile phones and handle general business, please log in to China (Anhui) Telecom online business hall to view and handle, Anhui Telecom wishes you a happy life!

Related questions
14 answers2024-03-31

Re-make a system By the way, bring your questions to the person who made the system, you can't ask what the result is, 3-4 people use it, is it a router problem, theoretically speaking, it shouldn't be stuck.

7 answers2024-03-31

The steps to set up the Mercury MR804 broadband router are as follows: >>>More

9 answers2024-03-31

After the router is restored to factory settings, it cannot directly access the Internet, and only after the user has made relevant settings and restarted the router can the Internet go to the Internet normally. >>>More

11 answers2024-03-31

It can't be divided equally, or the router provides the function of limiting the uplink and downlink speed, and generally enters the routing settings. Either ** person automatically limits the up and down speed. You are one of the nets, and you consult with each other.

12 answers2024-03-31

My 2m bandwidth is throttled.

Tell the landlord the most effective way. >>>More