How does the router divide the network speed of 4 computers equally?

It can't be divided equally, or the router provides the function of limiting the uplink and downlink speed, and generally enters the routing settings. Either ** person automatically limits the up and down speed. You are one of the nets, and you consult with each other.

LAN is used by routers who do not distribute bandwidth equally, they share network bandwidth.

If the line is fine, the improvement is limited, and you can only go to the telecom department to add money to upgrade the bandwidth.

If the test has reached the maximum number of your bandwidth, then there is no way but to go to the telecom department to handle a large export bandwidth, which will add money!

2. Enter the correct username and password to enter the router management background.

3. Check the existing IP address and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

1: First of all, you need to confirm whether your router can control the bandwidth, 2;If you can, log in to the router, there is a bandwidth management option, set it up in it, 3: If you only have 2 computers to access the Internet, directly bind your computer to the IP address, you don't need to care about the starting IP or anything! You only need to allocate the bandwidth according to the IP address you bind.

For example, if his IP is the starting IP and the end IP range that limits the internet speed, it must include his IP! For example, 100-104! But don't include your own IP!

But I think it's better to discuss this situation.

That's similar to the numbering range.,In fact, this basically doesn't work.,If he manually sets the IP,,This function can be scrapped.,If you really want to open ARP.,It's MAC and IP binding.。

Open IE,Enter the address bar to enter the router settings page,The username and password are admin,After opening, there is a setup wizard inside,You follow him step by step,There is a step that is very important to enter the username and password of the broadband,Click save or OK,Restart the router。

A router has 255 IPs from to to, and several IPs can be set to be used arbitrarily

Let's take a look at this first to see if we can solve the problem.

Router IP Bandwidth Control Function Settings: