What should I do if I have no network after restarting my router?

After the router is restored to factory settings, it cannot directly access the Internet, and only after the user has made relevant settings and restarted the router can the Internet go to the Internet normally.

If you factory reset your router and reset your router, and you can't access the Internet, you can restart the router and try again.

If you can't access the Internet after restarting the router, you can check whether the broadband is in arrears, and if it is in arrears, you will naturally not be able to access the Internet.

If there is no arrears, you can check whether the indicators of the modem are normal, and if the modem lights up red, it may be a problem with the optical fiber.

It is recommended that users contact broadband customer service for troubleshooting, which is relatively convenient.

If the modem indicator is normal, then it may be a router fault, and it is recommended that users change to a router to see if they can access the Internet normally.

Data expansion: Routers are usually located at the network layer, so routing technology is also a technology related to the network layer, and routers have many changes and differences compared with earlier bridges. Generally speaking, bridges are limited in that they can only connect to networks with the same or similar data link layers, and cannot connect to networks with large differences between data link layers.

Restarting the router should not appear no network,Maybe it will take a certain amount of time to restart the router to connect to the network,Wait for a while should be able to have a network,If there is still no network,Then you should first find out if the optical modem is operating normally,If it is normal, then press and hold the reset button behind the router to reset and reset the router again。 If it is not normal, then find out if the optical fiber connector of the optical modem is loose, plug it in and wait for a while, it should be used, if it is not loose, then it should be the optical fiber line is broken or there is a problem with the operator, call ** to consult the operator's customer service for the specific situation.

After you restart the router, the network is gone, this problem is that the router does not have the function of automatic dialing, or the router is not completely restarted when it is restarted, you can restart the router once and wait for it to recover before setting up, it is best to use the computer to open the browser to enter the interface of the router, and manually dial up the network, because there are some routers that you do not check his automatic dialing will not be automatically dialed.

If you've ever done a factory reset on your router, then the network needs to update your login password, or you need to reset your router password to log in. Turn on wifi with your mobile phone, you can set it up, and you can enter the username and password after the setting is completed.

Restart is just to clear the cache,Not clear the settings,Wait,Wait up to 10 minutes,If there is still no network, use the elimination method to find the problem,Look at the cat signal light is normal,Then look at the router light is normal,Finally, see if the network cable is connected。

Router restart, if you say that there is no factory setting, generally this may not appear This may be your network has not been connected, if you can't find this signal, it may be a problem with the router.

This is because after the router restarts, it needs to be set up again, as follows:

Step 1, take Xiaomi Mi 8 as an example, connect to Tengda router wifi.

Step 2: Open the browser, enter **, and click Refresh.

Step 3: Click Continue to the web version.

Step 4: Enter the administrator password and click OK.

Step 5: Select the network status, modify the Wi-Fi name and password, and click Save.

Hello! You can reset it and set it up again. The steps to set up the router are as follows:

1. Enter the router address, connect the wireless router, and enter the address you see on the router in the browser, which is generally .

2. Enter the corresponding account password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the Setup Wizard, and then enter the operation interface, you will see a Setup Wizard on the left, and enter (generally pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the account password, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill it in OK.

7. Set the password of the router, and then enter the wireless settings after the next step, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. The next step is to set it up successfully.

9. Click Done, the router will automatically restart, at this time you should wait patiently. The interface that appears after success.

10. How to connect the mobile phone to wifi is simpler, when your router is set up, click the menu key of the mobile phone, and then enter the mobile phone settings, the first item is wifi, and then you set it to on, click to enter the wifi list, and select the wireless network name set in your previous router. Enter the password you set earlier to connect.

Summary: How to use a wireless router, is a more common problem, but also a relatively simple problem, I believe that as long as there is an experience, you can also become a god, of course, the router settings are far from these simple content, after logging in to the router settings page, there are more setting options, setting other options, such as binding MAC address, over IP, firewall settings, etc., can make your wireless network more secure, to prevent being rubbed on the network.

If the user is using a mobile phone to connect to the wifi, you can disconnect the wifi connection and wait patiently for a while, and then reconnect for about a minute to access the Internet normally. After waiting for a while, the user can still not access the Internet, the user can restart the router again, and then reconnect to try to see if the Internet can be accessed normally, and the split that still cannot access the Internet may be caused by arrears, if the broadband is in arrears, it is impossible to access the Internet. If it is caused by arrears, the user only needs to pay the fee, and then restart the router after the recharge is successful, which is relatively convenient.

If none of the above methods can solve the problem, the user can check whether the light modem indicator is bright red, if it is bright red, you can call broadband customer service** to consult. If the indicators are normal, it means that it is a problem with the router, you can reset the router, and then re-log in to the router to make relevant settings.