How to review for the most effective exam?

01. Official teaching materials.

The content of the textbook is the root of the question, and there are many things, and it is not efficient to gnaw the textbook alone, but the textbook is a guide to the question after all, so it needs to be prepared. Combined with the best lectures, the knowledge points that need to be memorized in each subject are obediently written down in books, and there is no shortcut to this.

If it is World War II, there is no need to change the textbook to the latest version, the latest version of the textbook has not changed much compared with the previous year, and the specific changes can be marked with the latest version of the revision log.

02. Past questions.

Take more time to do past papers, at least in the last 5 years! Remember to be careful. The principle of each question has been clarified. Compare the questions to understand the knowledge points in the book. It's as simple as that.

It is unlikely that the first-level constructor will completely come out of the original question, but we mainly need to master the form of learning the question and the answering skills through the practice of the real question, and at the end of the study, it is to memorize repeatedly, and the key part is written silently according to the original words in the book.

Real questions can be practiced through the Xiaoyou question bank, which can better integrate fragmented time, and it is also a good choice to choose to buy a red treasure book for tutoring when necessary.

There are also many ** courses on the market, and to be honest, the specific training institution and teacher to choose varies from person to person. In the early stage, a few teachers auditioned to see which teacher they were more accustomed to or liked, and then went to the online ** or bought his course.

First of all, you need to read through the exam textbooks, first look at the annual exam syllabus, and know what knowledge points you understand, are familiar with, and master in the syllabus. Then look at the table of contents of each textbook to grasp the content of each chapter and the structure of the relationship between them. Lay the foundation for reading.

Finally, read through chapter by chapter and section by section, and mark the book.

Then read the exam textbooks carefully, read the knowledge points of the textbooks carefully once or twice, and don't care about it if you don't understand it, mark it in the book or write it down, and put it in the end, otherwise it will affect your learning mood and learning progress.

Finally, read the exam textbook intensively, and on the basis of careful reading of the textbook, you should understand and memorize the meaning of the key words, words and sentences on the knowledge points in the textbook. Because the test is your understanding of the knowledge points, the exam will produce basically the same few sentences to confuse the candidates, and this is when intensive reading comes in handy.

Doing questions is essential, you must find past years of real questions to practice, in the process of doing questions to find out your weak links on the knowledge points, to consolidate. Mark the knowledge points of the past papers every year on the book, and the key marks will not be marked. On the basis of the real questions, it is necessary to expand the review up and down, and you can draw inferences from the questions, and the same test questions will appear in the exam every year (this year's test is the first question, and next year is likely to test the second question).

Through the focus and score distribution of past past questions, it is summarized what is important to read books.

Look at the courseware, find some courseware from famous schools and famous teachers to study, and the key points, difficulties, and test points that the teacher talks about should be marked on the book for key review.

To study, you should develop a revision plan that is suitable for your own situation, so as to have a learning motivation for yourself.

Sober Question Method:The most important thing for multiple-choice questions is to review the questions. First, review the answers and scoring instructions in parentheses.

Since last year, the multiple-choice questions of the Certified Safety Engineer exam have changed the method of judging and scoring, as long as you answer correctly, you will be given points (one correct one will be scored, two correct two will be given 1 point......)., all correctly given a full score of 2), so we have to keep up with the times and follow a new way of thinking to multiple-choice questions. Second, what is the question that needs to be examined? Whether you need affirmative or negative style, some people often lose points because of this, and the person who wrote the question often uses the "robbery while the fire" strategy in "The Art of War" to seize the weakness of your brain, make a fuss about affirmation and negation, and let you be fooled.

Absolute Certainty:This method is more applicable in multiple-choice questions, because the change in the scoring method forces you to adopt a new way to respond. If you are not 100% sure of the alternative answer, do not choose.

If you think one of the 4-5 possible answers is 100% correct, then you choose this one. There are two, choose two, and so on. Remember: don't have extravagant hopes, half a point is half a point; As long as one of them chooses the wrong one, you won't get half a point.

Careful Screening Method:For some questions, you can't be sure of any of the alternative answers he gave. Then, you do a lot of comparisons, choose the one that you think is most likely to be right, and pick only one.

It is more difficult to learn in Yijian, so you can make a study plan in advance and start from the following four aspects.

1. Start with textbook materials.

Start with the textbook, master the basics, mark the difficult points (you think you can do it) and take notes, consolidate it a few times, the basic knowledge is always the top priority. You can't go wrong with watching it a few more times.

2. The syllabus of the examination and the key knowledge points of the past past questions.

If you want to pass the exam smoothly, you must not look at the questions at a glance, and your own learning ability is very important. Understanding the knowledge points thoroughly is the king. For those who are not too strong in learning ability, they can choose the explanation of online courses to understand the knowledge points more clearly.

Either way, three rounds of review are recommended here.

In the first round, you can look at the basic knowledge of each subject, and there are relatively many subjects in the Yijian exam, which takes about four months, and you have to spare at least two hours a day to review.

The second round is to start doing questions, learn more about various question types, and read books carefully.

The third round is to check and fill in the gaps, review the questions that I often made wrong before and the memory is not very deep, be fully prepared for the war, and have a good attitude.

3. Choosing a teacher is very important.

Everyone's learning ability and acceptance are different, the key content of the teacher's explanation is also different, to choose the right teacher according to their own situation, you can find some teachers who are more famous in this industry, such teachers should be suitable for most candidates, otherwise there will be no place in the industry. For example, Mr. Zuo Hongjun has a good reputation in the industry, and his teaching methods have been recognized by many people.

Fourth, a few days before the test, check and fill in the gaps.

The usual review is almost over, then do more to see the usual mistakes a few days before the exam, relax your mind during the exam, play your level normally, read the questions carefully, as long as you work hard, you will have good results.

1. Arrange the study plan reasonably.

2. Public courses: I usually listen to a chapter class in a public class, do chapter questions, consolidate some knowledge points, read books at night, go through all the public classes and books, and do real questions. I use a 10,000 question bank, brush the real questions, go to work or take the car during the day to brush the 10,000 question bank, make a paper version at night, and stipulate the exam time, which is basically enough.

3. Practice: Leave time to practice, the focus is on practice, I am a white, I have not been to the project a few times, and practice will involve a lot of practical construction things. There are many books, at least 20% of the test points outside the book every year, and the teacher in the class is also talking about the content of the book, you must figure out each construction process clearly, and understand it, and the big guy who has done the project should be relatively easy, but the exam is still different, and some answering skills still have to be mastered.

The above is the method of learning about the first-level constructor shared by the Zhongchu Talent Network today, hoping to help you to a great extent.

The full name of Yijian is a registered first-class constructor, which is a professional qualification in the construction engineering industry and a prerequisite for serving as a project manager of large-scale projects.

Hello! Are you in your first year of applying? If it is the first year, you can go to the education network forum of the construction project to take a look, there are many old students will share their learning experience!

It is recommended to start learning from the second building, the second building is simple, and then you can continue to learn the first construction when you have a foundation, starting from the simplest regulations, you can find the royal one to build, the group owner is a person who has come over, and will give a review plan every year.

According to the actual situation of the individual, choose the most effective method, such as self-directed learning, online training, face-to-face training, etc. If the learning ability and self-discipline ability are relatively strong, you can take independent learning, formulate a reasonable study plan, and strictly follow the plan. If you choose training coaching, then you should follow the training steps closely, make reasonable use of resources, and acquire valuable knowledge in the shortest possible time.

Maintain high energy at all times and improve learning efficiency in a good learning environment.

Since the work of in-service candidates is already very intense, it is impossible to spare a complete time to study, therefore, we should adhere to the habit of reading books when we have time, after all, the knowledge of the professional qualification examination is not systematic and continuous knowledge, so it is suitable for decomposition and learning, and it is also helpful to learn a little and digest a little learning mode. After perseverance, candidates will find that the knowledge of the textbook has been absorbed by themselves unconsciously, and it will also help to reduce the psychological pressure of facing the four books.

To enhance memory, improve efficiency, appropriate most note-taking is indispensable, you can summarize the key content of the teacher in the textbook, so that you can grasp the key points when reading the book in the future, everyone will forget, with notes, there is a foundation when reviewing, typical examples and typical solutions in the course, these are really valuable, but also things that must be remembered.

In fact, the revision method of sprinting before the exam is very simple. It is recommended that you take which subject at what time period, and which subject to review during this time period. Every morning is spent reviewing engineering economics or project management, and in the afternoon, regulations or professional practices are reviewed.

The purpose of this is to keep your thinking active during this specific period of time, and to be able to naturally start working on the corresponding subjects when you see them. Eventually, you can easily skip the "warm-up" at the beginning of the exam.

The order of study of the four subjects is as follows:

There are four subjects to be examined in the first-level construction engineer examination, including three public courses, namely laws and regulations, project management, engineering economics, and one practical construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, and mechanical and electrical engineering.

Among them, the public courses are relatively easy to take, as long as you read through the book, there is generally no problem. The most difficult part of the Yijian exam is the practical course, which is difficult and flexible, as long as the four subjects of the exam are passed within two years. Therefore, we should review the practical subjects well. Listen to lectures and practice.

You can first familiarize yourself with the exam questions, read books, listen to tutorials, and brush up on the practical order. Look at the law and remember the hard regulations. The management and economic difficulty are relatively low, reading, listening, and brushing are all optional, mainly according to their own strengths and weaknesses, mainly based on weaknesses.

Combined with the past year's past questions, check the gaps, and make up for the deficiencies in a targeted manner.

Advantages of a construction certificate:

1. Promotion and salary increase.

The most direct benefit is the promotion and salary increase, because the first-class constructor is a professional qualification certificate in construction engineering, which is a prerequisite for serving as a large-scale project manager. Therefore, when you have both experience and certificates, your competitiveness will be much greater, and you will have a stepping stone to promotion and salary increase.

2. Professional title review.

Many candidates who take the first-class construction engineer certificate have their own needs to evaluate their professional titles. Maybe you have a good welfare package, but for many people, it is still quite difficult to evaluate senior titles. However, now many provinces "one build corresponds to the intermediate level", and the pass rate of the certificate is more advanced.