Apple x screen click is not responsive, how to deal with it?

As for why the iPhoneX screen failed, the answer given by Apple was a bit "cold", and the answer given was that the mobile phone was afraid of cold. When the environment of the iPhone X cools down quickly, the phone will not work.

In addition to explaining why, Apple's official solution is also a pale one - a software upgrade. However, since the launch of the iPhone X, at least two versions of the software have been updated, and the annoying problem remains unresolved. Apple's solution to this problem is to "restart" your phone.

However, after a period of research, Apple Maintenance Network has finally found a quick solution to this problem! Friends with iPhoneX listen, when your phone's touch screen is malfunctioning, you can even press the [lock screen button twice to enter the initial unlock interface, and then wait for the face to be unlocked successfully 3-5 times].

If the screen fails, it may be because the phone cache is too much and it is dead, you can try to force restart the phone to see if it can be solved. In daily use, remember not to open too many background programs, and often clean up the background. Sometimes the stuck screen is also related to the mobile phone system, please upgrade the mobile phone system to the latest version.

If the above methods cannot be solved, it is suspected that the mobile phone has a screen cable failure, and it is recommended to go to the mobile phone after-sales point for testing and repair.

The mobile phone has a situation where the touch screen is not sensitive and malfunctions, it is recommended:

1.Check if the phone has a film, if there is a suggestion to cancel the screen film and try it.

2.If the touch screen of the mobile phone is completely malfunctioning, it is recommended that you restart the machine and observe it again.

3.Try to update the system version of your phone (Note: Please back up the data in your device before upgrading).

4.If it doesn't work, back up the data in your device (contacts, text messages, **, etc.) and try to restore factory settings.

Reasons why the phone's touch screen is out of order.

1. Personal habits, such as playing games or operating frequently, will cause problems such as screen heating, and the screen may be burned out!

2. Battery failure.

3. Influence of static electricity, sweat and oil.

4. The influence of high temperature and low temperature.

5. The system settings are out of order.

6. Viral software causes the system to be infected with viruses.

7. Large-scale software makes the mobile phone unbearable.

Answer: I'm glad to answer for you pro Apple mobile phone card is a very normal thing, when you encounter an Apple 11 screen that doesn't move, please press the volume plus button + power button at the same time, and stay for a while. Then your phone screen will appear on the current power off, at this time click to cancel. In half of the cases, if the mobile phone card and screen point are not moving caused by the mobile phone system software, it can be solved by pressing and holding the volume button + power button.

If your phone is still stuck and the screen doesn't move, you can try force restarting your iPhone. Force restart your iPhone, generally by gently pressing the volume + key and then the volume - button.

I know this question.

Rebooting didn't work.

I wonder which hardware is the problem.

Is it a problem with the screen, or is it something else?

Apple x National Bank memory 256g (about 80g used) to repair the customer repaired, he didn't find a problem, said maybe the battery problem, so he changed the battery, but the use of a period or crash (stuck screen), the screen can not move, the keys are good, you can use Siri to dial**, you can connect, you can talk normally. Now it is frequently stuck, and it can no longer be used normally.

I want to ask, is this kind of stuck screen a hardware problem? Which hardware is having the problem? Screen or hard drive or something else???

2. Press and hold the volume increase and then press and hold the volume down button on the left side of the phone.

3. Press and hold the volume increase and volume decrease buttons at the same time, and then button the power button on the right side.

1.It can be caused by hardware damage, systemic damage, or software damage. Workaround:

First of all, it can be forced to shut down: press and hold the power (power button switch machine button) + home button at the same time, and release the home button after the black screen appears, the white apple logo will appear within a few seconds after the home button is released, at this time the power button should not be released, wait until the white apple logo disappears and the screen is turned off to complete the shutdown.

2.Sometimes if you encounter particularly cold weather, or your fingers are relatively dry, the solution:

Please use it in a suitable temperature environment, and the fingers touching the screen should not be too wet or too dry. Restore the factory settings of your iPhone, that is, after backing up your data, then erase your iPhone data and restore it to factory settings.

3.It may also be caused by excessive dust on the screen, solution:

Clean up your iPhone screen. Or if the screen protector is too poor, please remove it and replace it with a mobile phone film at *** point. Sometimes the touch screen does not work and it is related to your iOS system, please upgrade your iOS system to the latest version.

After upgrading to the latest version of iOS, the touch screen function will be restored. Unstable voltage will also cause the touch screen of the Apple phone to be insensitive, so it is recommended to charge it. Keep away from places where the electromagnetic field is strong or the temperature is relatively high, which can solve the situation that the touch screen is not sensitive.

In addition, if it is determined that the hardware of the touchscreen of the Apple mobile phone is broken, it is recommended to go to the Apple retail store for help from after-sales personnel or send it for repair.

Maybe there's something wrong with the screen.

There are many reasons for the intermittent failure of the iPhone touch screen, and the main common ones include the following:

1. Sometimes the touch screen fails because of too much dust on the screen. Find a cloth to wipe your glasses and clear the screen of your iPhone.

2. It may be that there is water residue on your hands, which makes the touch screen insensitive, so try to keep your hands dry when using your mobile phone.

3. It may be caused by the poor quality of the mobile phone film, please remove it and replace it with a mobile phone film.

4. Sometimes the touch screen is invalid and related to the iOS system, please upgrade the iOS system to the latest version. After upgrading to the latest version of iOS, the touch screen function will be restored.

5. If none of the above methods can solve the screen failure, and it is suspected that the screen is not in good contact due to the failure of the cable, it is recommended to go to the mobile phone after-sales point for inspection and repair.

Touchscreen basics.

Gestures are useful for using Number on iOS devices

What is the reason why the touch screen of the iPhone is not sensitive?

iPhoneX touch is not sensitive, change the screen assembly, use smoothly and freely.

The touch of the mobile phone is not sensitive, you really should be the hardware problem of the mobile phone, you can go directly to their after-sales service to test it, it really can't only change the screen.

The touch screen of the Apple X phone is not sensitive, you can try to restore the factory settings to solve it.

The specific operation is as follows:

1. Open "Settings" on the desktop of your phone.

2. After opening the settings, click "General" to enter.

3. Click "Restore" at the bottom of the "General" interface to enter.

4. Select the "Reset All Settings" option in "Restore" (the "Erase All Content and Devices" option will clear the user data, and it is recommended to back up before restoring).

5. Then enter the "password" to confirm.

6. Finally, click "Reset All Settings" again to authorize the operation to complete the operation, and wait for the system to automatically restore and restart the phone.

Can be corrected. Or go straight to the repair shop.

Change a new one, the old one does not go, and the new one does not come.

If it's really not sensitive, you can only change the screen.

If the warranty period has not passed, it can be tested free of charge at the after-sales point.

Reason: 2. The iPhoneX screen cable is disconnected.

3. The touch base parts of the inner screen are damaged.

4. Motherboard touch, CPU pins and other chips, board lines and other virtual soldering, dislocation, short circuit, disconnection, etc.

How to work: If Siri Assistant is turned on on your current iPhone, you can activate it and say "Turn off VoiceOver" to turn it off automatically. If you don't turn on Siri, you can also try pressing the home button on the home screen three times in a row to see if you can turn it off. If that doesn't work, the only way to turn it off is through the VoiceOver operation.

iPhone: These are all relatively common failures. It's just that all of a sudden the screen fails and you can't click on the screen.

This is generally how this is done.

1. I have fallen, or I have fallen not long ago, the screen touch screen has been loosened, and after a period of time, the wiring will fall off directly.

Second, if it has been flooded, it can be used again when it is dry, as if it is fine. In fact, the motherboard must be cleaned, otherwise the circuit will rust and there will be problems after a period of time.

3. High imitation charger and charging cable. Many people give off the bag when they buy it, and when they get it back, it is a high imitation, and after using it for a while, it hurts the power supply. Directly scrap the phone, especially the Hong Kong version of the mobile phone.

Fourth, charging while playing with your phone will also hurt your phone. Sometimes the current is too high and burns the inner screen.

Is there any way to fix this, check it, if the line is loose, change the line. If the inner screen is broken, directly replace the screen assembly.

If you change the screen, it is not good, it is the touch screen IC problem of the motherboard, the so-called touch screen IC is a chip that controls the touch screen, which can be replaced, but the process requirements are very high, this is a chip-level maintenance, and the general small shop will not. Only contact the after-sales center for repairs.

Click on the Apple s mobile phone screen does not respond, what is the reason why the screen does not respond, it may be the traffic, or it is a problem with the network, there is no response, this is an Apple mobile phone, it is also a mobile phone manufacturer and an electronic product, and it is convenient to carry the design.

After the iPhoneX phone screen fails, you can do a screen correction on the phone.

1. Open the homepage of iPhoneX, find the Settings app icon in the lower right corner, and click Enter;

2. Under the settings menu bar, click the "General" option to enter;

3. Then swipe down the interface, find the accessibility options, and click the left mouse button to enter;

4. On the Accessibility page, find the Touch Adjustment option and click "Touch Adjustment" to enter;

5. After entering, turn on the button switch behind the touch adjustment, and the iPhoneX phone will automatically perform screen calibration to fix the screen touch failure.

It is recommended that users double-click the home button to clear all programs running in the background.

When the phone is depleted, the phone will enter an automatic shutdown state, and the user can charge the phone at this time, and then resume the operation of the touch screen after turning it on. Users can also fix this problem by restarting the phone and resetting the phone to factory settings.

You can correct the screen of your phone, and the specific steps are as follows:

1 Open the homepage of iPhoneX and click the open settings icon.

2 Under the settings menu bar, click on the "General" option to enter;

3 Then, swipe down on the interface, find the Accessibility option, and click Enter;

4 On the Accessibility page, find the Touch Adjustment option and click Enter;

5 Finally, once entered, turn on the button switch behind the touch adjustment, and the iPhoneX phone will automatically perform screen calibration to fix the screen touch glitch.

Let the phone automatically turn off when the battery is exhausted, then charge the phone, and wait for the phone to turn on and generally restore the touch screen function.

2.Upgrade the system, connect your phone to iTunes, and then upgrade your phone's system to the latest iOS.

3.Double-click the home button to close all apps running in the background and see if that fixes the problem.

4.Press and hold the power button first, then press and hold the home button to return to the home screen and see if the touch screen problem is solved.

Ask Apple 6p

The touch screen is out of order.

It's okay to ask questions'Close.

Whether the shutdown and restart can be used normally.

It can only be used after overhaul and re-oxygen welding.

Apple mobile phone screen failure is usually a failure of the mobile phone hardware or system failure, you can first use iCloud cloud service to erase the phone to restore the phone to factory settings, if the phone after the factory reset screen failure can not be solved, you can go to the Apple after-sales center to detect whether the hardware of the mobile phone is faulty.

Although the sales of the iPhone X have not reached new heights, they still sell a lot, but probably due to the influence of new technology, this phone has also become one of Apple's most problematic phones in recent years, and the most puzzling thing is that the iPhone X occasionally has a touch screen failure.

Restart the phone, if it still doesn't work, there may be a problem with the screen, go to the after-sales service to take a look, and detect the reason.

1. Excessive use time.

The Home button is one of the most used buttons on iPhone, and of course, it is also the most problematic place. If you use it for too long, it is very likely that the home button will fail.

2. The home button shrapnel is deformed.

Tests have proved that when most of the iPhones with the home button out of order were disassembled, they found that there was no support under the metal sheet, and there was some deformation, and the shrapnel on the screen was also slightly deformed. Poor contact between the cable and the screen will naturally fail.

3. Go to the nearest after-sales center to replace one.

2401 Apple customer maintenance service on the 24th floor of Silverstone Plaza, Jinjiang District, providing a full range of maintenance service support for watches, mobile phones, tablets, all-in-one computers and notebooks. On-site inspection On-site maintenance, we strive to provide customers with excellent maintenance services.