What are the obvious differences between CAD2010 and 2004?

1. Different versions.

1. CAD2010: The internal development code is Gator, and the version was released in 2010.

2. CAD2007: CAD is the abbreviation of Computer Aided Design, which refers to computer-aided design.

Version released in 2007.

Second, the functions are different.

1. CAD2010: includes free-form design tools, parametric drawing, and enhanced support for PDF format.

2. CAD2007: Added AutoCAD Design Center (ADC), Multi-Document Design Environment (MDE), Internet Driver, new object snapping function, enhanced annotation function, and local opening and local loading functions.

Third, the characteristics are different.

1. CAD2010: It has powerful three-dimensional functions and supports the exploration of various innovative shapes. With the addition of mesh objects, other 3D objects can be converted into mesh objects, and meshes can also be generated by direct creation.

2. CAD2007: It has perfect graphics drawing function, powerful graphics function, can be used in a variety of ways for secondary development or user customization, can be converted into a variety of graphics formats, has strong data exchange capabilities, and supports a variety of hardware equipment and operating platforms.

There are different versions of CAD, and it is best to install it according to your own situation.

1. AutoCAD2004 is a classic CAD version, which is very smooth to use and many people use it. But 04 and 06 CAD file formats.

It's the same, 06 is very compatible.

The version has a sheet set function, and can be selected when cutting or extending. 04 This aspect is very weak, it is when extending or cutting a set of lines. Version 06 makes up for these shortcomings in version 04.

The version is actually OK.,It's just that it often appears that the display is garbled.。

There are also some characters that always appear garbled. There is no problem with other uses, whether it is a low version or a high version, and the garbled characters have led to the fatal flaw of the 07 version.

4. The current 08 version is better if it is a high version, and there are more people who use it, and the 10 version should be good, but there are few people who use it. The 08,09 version is also very good, but it is more memory intensive, which is a little worse than the 06 version.

Of course, no matter which version you use, it is under the premise of your configuration, in general, it is recommended to use the CAD2008 version. Versions above 10 are basically very memory-hungry, and they consume more memory than some 3D design software. Computer configuration.

Low ones are not recommended to install.

It is worth upgrading, and the difference between the two is mainly in the following aspects:

First, the drawing function is different.

1. AutoCAD2010: Parametric drawing function can greatly improve your work efficiency by constraining drawing objects based on design intent. Geometric and dimensional constraints allow specific relationships and dimensions to remain unchanged between objects.

Second, the lead function is different.

Third, the drawing management is different.

1. AutoCAD2010: Sheet sets make it possible to set which drawings or parts should be included in the publishing operation, and the drawing list is more flexible than before.

There is still a big difference between 2010 and 2012, but at present, 2012 is not popular, many functions are new, there is no help, it is recommended not to upgrade! 2010 should be applied in major design institutes are not very popular, generally now 09 08 is used more.

If you're playing software, or if you have compulsive compulsion to upgrade, you can upgrade. The two versions are about the same, and the use is almost the same. Personally, I think the 10 version is enough. Hey.

CAD now 2012, 2013 too many functions are for 3D drawing, if 2D drawing does not need to upgrade.

The higher the version, the higher the computer configuration required, and the 3D drawing is optimized. If you usually just have a graphic design, it is recommended not to upgrade.

Versions before 2010 cannot export entities, while versions 2012 can export entities, which are in IGS format and can be opened by commonly used 3D software. If you use CAD to draw floor plans, it is almost the same whether you upgrade or not, because each version of CAD drawing floor plans is much the same. If you want to use it to draw 3D drawings, it is recommended to upgrade.

Because the drawings you draw generally have to be converted to a public format and opened by commonly used 3D software.

It's useless, there's no big difference. It is recommended not to upgrade.

However, it is recommended to install a small version conversion software with it.

There's no need to upgrade.,The main thing is to use it yourself.,The new version of the CAD is just a little less functional.,But in my opinion, it's not very useful.,The 2007 version of the CAD and the 2012 version of the CAD under my home,I've compared,The interface can change a little.,But it's almost the same.。

The color of the interface, black and white are all adjustable·· That's not the difference.

The lower version cannot open the higher version.

I have used the 08 version and the 12 version, the 2008 version of the operation interface is black, the 08 version and the 2010 version are almost the same, the 2012 version of the operation interface is white, I have used the 2008 version, and then use the 2012 version, some are not used to it, the operation interface has been completely changed, a bit like the difference between the 97 version of the office and the new version. The 2012 version is more functional.,Now schools generally use the 08 version.,If you learn the 08 version.,Will be basic.,The 12th version adapts very quickly.。

The 12th version can open the 08 version, the 08 version can't open the 12 version of the file, if you want to open the 12 version in the 08 version, you need to save it as the 08 version file format when you save the file in the 12th version.

2004 is a classic CAD version that is smooth to use and used by many people. However, the CAD file format of 2004 and 2006 is the same, and 2006 is very compatible.

At the same time, 2006 has a drawing set function, and it can be selected when cutting or extending. 2004 is weak in this area, especially when extending or cutting a set of lines. 2006 just made up for these weaknesses in 2004.

I've also used the 19th version of the commonly used version, and it feels almost the same when I use it, because practice makes perfect, and some deficiencies can be solved by other methods, so I don't feel **unaccustomed.

AutoCAD already has a lot of versions:

Such as CAD2000, CAD2004 CAD2013, etc., its version also follows the years, basically a year will release a new code Zen Hail version of Chi Fan, like this year is 2014, it will release the CAD2014 version, but it does not mean, the newer the version, the better.

Often a software update, there will be a lot of small problems, usually not as stable as the previous version, easy to use, especially the classic version, such as CAD2004, CAD2007, etc., these older versions have been revised many times, in terms of technology, user experience are better than the new version.

Therefore, if you want to install CAD, it is recommended that you install the classic version, so that the probability of problems will be much smaller than other versions, and it is also more economical computer memory and reduce the negative load of the computer.