How to wire the Audi battery? The correct way to wire the car battery

The battery lap should be a red chuck on the positive pole and a black chuck on the negative pole. When the negative electrode is connected, the body of the rescued vehicle should be connected to the iron position as the negative electrode connection point.

Connect the positive pole of the rescued car with the red wire first, and then connect the positive pole of the ambulance. Connect the negative pole of the ambulance to the negative pole of the rescued car.

After starting the engine of the rescue vehicle, after the rescued vehicle starts the engine, the positive wire is removed first and then the negative wire is removed. The engine of the rescued car starts more time to ensure that the battery is energized more.

Car battery connection steps:

1. The car needs a rescue vehicle, you can call your family or friends to drive over to help, there may be people here who are worried about whether the battery of their car will be consumed by other cars, in fact, there is no need to worry, in the process of taking the battery, the battery of the rescue vehicle is mainly an auxiliary role.

2. The front of the two vehicles is close together, and the rescue vehicle does not need to turn off, and two battery lines are prepared.

3. Open the hood, find the position of the battery, and pay attention to distinguish the positive and negative poles of the battery.

4. One section of the red positive battery wire is connected to the positive terminal post of the rescue vehicle battery, and then the other end is connected to the positive terminal post of the rescued vehicle battery. The same goes for the black negative battery wire.

5. After the battery wire is connected, it will start normally in the rescued vehicle.

6. After the rescue vehicle is started, the battery power can be restored after more than half an hour of normal operation.

Jumper start. Connect a normal battery to the battery of the faulty car and start it across the board. The positive and positive electrodes of the two batteries, the negative electrode and the negative electrode are connected.

Hope it helps! Useful! Thank you!!

1. Before lapping, the specifications of the line should be correctly selected, such as, within 2 meters, 16 square copper wires of the car, 2. Accurately and clearly determine the positive and negative poles of the battery, and turn off the electrical appliances before lapping, 3. When lapping, the positive pole is to the positive pole, and the negative electrode is to the negative pole, that is, the battery is connected in parallel, 4. After the car starts, the lap wire can not be removed immediately, and it is necessary to charge it at 1500 rpm for a few minutes, and then withdraw, but it is still necessary to fully charge it at 1500 rpm for 20 minutes to provide a start, and charge it for 30 minutes to start the next day.

Car battery power**, the specific steps are as follows:

1. First of all, prepare a tie wire, as shown in the figure below.

2. Next, open the hoods of both cars as shown in the picture below.

3. Then, remove the battery buckle, and you can easily open the battery cover, as shown in the figure below.

4. Next, after opening, you can see the positive and negative poles of the battery, which are the positive and negative poles, as shown in the figure below.

5. Finally, connect the positive pole of the two cars to the positive pole and the negative pole to the negative pole. In this way, the battery of the car is completed, as shown in the figure below. Wandering and trembling.

Notes:

1. Do not connect the positive and negative poles of the battery in reverse, it will burn the electrical appliances.

2. Do not connect the negative terminal post of the battery to the vehicle with automatic start and stop.

The battery is out of power, which means that the vehicle cannot be started after opening the key door, or even Marfa does not respond, and the lights become dim. Don't start with common sense at this time. Because this will cause greater damage to the battery.

When the vehicle is out of power, it can be started by taking the power method, first open the engine compartment, find the location of the car's battery, and there will be a red passport with Li on the positive pole.

Limited by the length of the wire, try to shorten the distance between the batteries when taking the power, and in addition, try to choose a wire with a length greater than 3 meters to facilitate operation.

The correct way to wire the car battery Before the car battery takes the town travel line, we need to find the rescue vehicle, let the rescue vehicle get close to the front of the rescue vehicle, and make sure that the two vehicles are not in direct contact. Once parked, turn off the engines of both cars and open the hood. When we are ready, we need to find the grounding wire of the river dragon, which is commonly known as the grounding wire.

The red line is our yang candle and the black candle is our yin candle. After confirmation, we found the position of the positive and negative poles of the batteries of both cars. First, connect one end of the red jumper to the positive pole of the battery of the rescued vehicle, and the other end to the positive pole of the rescued vehicle.

Next, we connect one end of the black power cord to the negative pole of the rescue vehicle. It must be noted here that the rescued vehicle must not be directly connected to the negative electrode, as this will damage the batteries of both vehicles. The correct thing to do is to connect the other black end to the ground of the rescued vehicle.

Or the body is not painted on exposed metal. When you're ready, wait 2-3 minutes for the rescue vehicle to start, and then both vehicles will be powered on. After the ignition of the rescued vehicle is successful, the ignition wire is removed in reverse order, that is, the cathode of the rescued vehicle, the cathode of the rescued vehicle, the anode of the rescued vehicle, and the anode of the rescued vehicle.

If the rescued vehicle allows, it is best to start the vehicle for more than half an hour and let the battery charge the vehicle. Note that the positive and negative electrodes of the battery should never be touched or directly touched by hand. @2019

Between the rescue vehicle and your car, use cables to connect the positive and negative poles of their respective batteries.

The specific method is as follows: the battery of the two cars, the positive pole to the positive pole, and the negative pole to the negative pole can be connected.

The wiring method of the car battery is as follows:

Preparation materials: car, battery.

1. First of all, we must find the power tools, generally prepare the battery clamp and wire, and the battery clamp here should be protected by an insulation layer to prevent the occurrence of failure to clamp the battery terminal.

2. Before finding the car to the car, the best distance should be kept at about 1 meter, and then the engine compartments of the two cars should be opened.

3. When the positive and negative poles connected to the battery are not wrong, they can be distinguished by the color of the battery terminals, red is the positive pole, black is the negative pole, and it can be distinguished according to the battery clamp and connecting wire.

4. Another place to pay attention to is not to directly refuel the starting vehicle, which will lead to the battery refueling of another vehicle, start looking for the vehicle, and then wait for two minutes to start the vehicle to refuel.

5. You can unplug the wire before feeding the car for a period of time, so that you can charge your car and charge it, and you can pull the wire after starting for a while. Pay attention to the order when drawing the line, first pull out the negative pole, and then pull out the positive pole.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

Use in an emergency, such as car A rescue car B, car A live wire battery binding post through the battery wire to pick up car B battery live wire binding post, car A zero line battery binding post to car B battery binding post, lap to be firm, otherwise sparks, after the lap is done, car B ignition starts, car B can start the engine through car A battery.

The positive poles of the two batteries are clamped with two clips of the same line, do not connect them in reverse!

The positive pole is connected to the positive pole, the negative pole is connected to the negative pole or the iron frame!

The old method of connecting the car battery to the cable is as follows: 1. Before the wire, the engine must be turned off. In the case of a dead battery, do not try to ignite it over and over again, which will make the battery that is already low enough to exhaust the last remaining power;

2. Take out your own tie or take a positive and negative pole of the tie line to other cars;

3. In addition to the wiring, you also need a car that can provide electricity. Generally, the battery of the vehicle is located in the engine compartment;

4. Remove the buckle to open the battery protective cover, revealing the positive and negative poles of the battery. Whether it is a rescue vehicle or a rescue vehicle, the operation of the battery should be carried out in the state of flame-off;

5. Take a tie wire, connect one end to the positive pole of the battery without electricity, and connect the other end to the positive pole of the battery with electricity. Do not touch the positive and negative electrodes, it will be in danger of short circuit;

6. Take the other end of the wire, first connect the negative electrode with the electric battery, and then connect the other end to the engine shell or body of the non-electric vehicle, remember to connect the negative electrode to the negative electrode;

7. After the wire is set up, start the car with electricity, which can provide reliable voltage to the car without electricity, and the throttle can speed up the charging speed.

Millions of car purchase subsidies.