How to lattice the apple mobile phone, the method of the apple mobile phone hard grid machine The in

I have five things on my phone, and I want to ask for the next point of the grid.

1. To check the machine through the iTunes software, first install the Apple iTunes software on the computer, connect the Apple mobile phone to the computer, and open iTunes. After that, **Apple mobile phone firmware, note** firmware should be the same as the mobile phone system version, otherwise after flashing, the mobile phone may not be activated or turned on, and then the Apple mobile phone will be modulated into recovery mode state. Extract the ** Apple phone firmware through iTunes software and flash it, you can restore the Apple phone to the factory state, and all the data on the phone will be erased.

2. Reset the factory settings of your phone, then click the restore option on the general options list page to open it, and then choose to erase all content and settings. If there are any important files on the phone, it is recommended that you use iTunes software to back up when you are on the phone, so as to avoid all the data not being lost after the grid.

iPhone grid steps:

1. The first step is to open the desktop and click "Settings". As shown in the figure below:

2. Next, find "General" in [Settings] and click to open. As shown in the figure below:

4. Then, click on "Reset All Settings". As shown in the figure below:

5. Then, enter the password of your mobile phone. As shown in the figure below:

6. After the settings are restored, click Erase All Content and Settings. As shown in the figure below:

7. Finally, choose whether to upload the document data to iCloud backup according to your needs, and then click [Erase Now]. As shown in the figure below:

Need to prepare tools: an iPhone.

Here's how:

1 First of all, click on the "Settings" of the software that comes with the Apple phone, as shown below

2 Click "General", as shown below

3 Drag the screen to the bottom and select "Restore", as shown below

4 Then select "Reset All Settings" as shown below

5 Finally, enter the boot password of your mobile phone and click Done. As shown below:

Note: Before restoring all settings, it is recommended to back up important data in advance to avoid being unable to retrieve them.

You try not to do it yourself, it is easy to "jailbreak" into a white apple. It is recommended that you go to Zhongguancun, where you pay a little money, and almost every store can help you escape from prison.

The iPhone does not have the word "lattice", and only by restoring the firmware or upgrading can the system be as good as new.

The iPhone can be realized through the "Restore" function in the mobile phone system.

Turn on your iPhone screen, find and tap "Settings".

2.On the pop-up page, select and click General.

3.Then click "Restore".

4.Select "Erase All Content and Settings" on the pop-up screen.

5.Enter the passcode and you're done with your iPhone.

The iPhone can be realized through the "Restore" function in the mobile phone system.

Turn on your iPhone screen, find and tap "Settings".

2.On the pop-up page, select and click General.

3.Then click "Restore".

4.Select "Erase All Content and Settings" on the pop-up screen.

5.Enter the passcode and you're done with your iPhone.

There are two ways to use the grid: 1. Soft grid: enter * on the mobile phone and then ask you to enter the lock code, the initial password is:

12345, if you have changed the password of the mobile phone, it is the changed password (not the SIM card password), after which a white screen appears, only the word nokia is displayed, 2 3 minutes after the grid is completed, and the time is re-entered. 2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key when turning on the phone, and turn on the power until the word "nokia" appears (no button can be released during this process).

Wait a few seconds until "formatting...... appearsword, then you can release the above buttons. After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen. The above grid machine needs to be noted:

Keep the battery absolutely sufficient, do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Generally, soft grid is the priority. (Remember to back up the data you want before the machine).

1. If you want to format your iPhone, you can actually restore all the content and settings, and then the phone will be restored to its initial state, and you need to reactivate it before you can use it.

2. Click Settings - General - Restore - Reset all content and settings, and then enter the password to verify (remove the screen password).

3. After the phone is restored, the interface to activate the phone will appear, just like a newly bought machine, which needs to be activated before it can be used.

dfu。Press and hold home and power and then release the power supply. Until the icon of iTunes appeared. Link your computer. Just reply to the firmware.

The X6's hard grid machine is: turn off first, and then press and hold the dial key, the hang-up button and the camera key at the same time when turning on the machine (you can't release any of the keys during this process). It was not loosened until the time of the choice of country appeared.

The phone enters DFU mode, and the computer iTunes Shift+ Restore.

Inside the restore you should click Erase all content and settings.