There are several issues that need to be paid attention to before car modification

Sticking a vertical mark on the front of the car is not considered a modification.

The appearance modification of the car, power modification, lamp modification, etc. are more common modification methods, and fans are pursuing performance while the requirements for personalization are getting higher and higher, but blindly increasing performance or showing personality will affect the effect of the final modification, so car modification still has to follow certain rules.

The modification project must be coordinated, many car owners because the concept of modification is not very clear, resulting in a nondescript feeling after the modification, such as some owners want to improve the performance, so that the car runs faster, but at the same time to install a set of audio system, the weight of the audio will immediately make the power of the promotion greatly reduced. Another example is the modification of the appearance, many car owners will put a lot of stickers on the body when modifying, but there is a lack of matching, all kinds of stickers get together, passers-by not only do not reflect the personality of the owner, but look nondescript, not coordinated at all.

In terms of power, the most popular modification should be the intake and exhaust system, followed by the ignition system, these two modifications are mainly to make the car's intake and exhaust smoother, so as to improve the efficiency of the engine.

There are also friends who mainly modify the exhaust system, through the reasonable control of the air-fuel ratio, so that the proportion of gasoline and air is coordinated, fully combusted, and the exhaust emissions are reduced, which has great benefits to the engine and the environment, and is one of the preferred projects for many car owners to carry out high-end modifications.

Car owners should have their own ideas when modifying, what effect they want to achieve, the idea of high-speed modification shop professionals, and then let them put forward some modification opinions, the two aspects of each other can make the car after modification can achieve a more satisfactory effect.

After all, most of the modification styles and modifications suitable for different brands of vehicles are different, and when you see a certain part of other cars modified, you don't care about the three seven twenty-one places and want to modify it on your favorite car, you must remember that the modification can not be blind, and it is the most important thing to follow your heart!

The range of car modifications is large, but no matter what kind of modifications are made, it is not necessary to compromise its main features. Before modifying, be sure to think clearly about why and what to modify. It is best to fully grasp the main performance of the original factory in various fields, find out the shortcomings, consider the pros and cons of the modification, and then start the modification.

What are the issues that need to be paid attention to in car modification?

Moderate improvements to the ignition can increase the driving force of the car. The ignition device improves the flame divider, flame kinetic energy and ignition line neutral. High-quality goods should be used when modifying large surrounds.

Due to the high-quality FRP anti-corrosion, both the firm level and the surface smoothness are far better than ordinary commodities. Also, don't use a large bumper that must be removed from the original bumper to be installed. Due to the particularly poor anti-collision ability of FRP anti-corrosion, the large envelope in the original package is not easy to affect the firmness of the vehicle.

If it must be surrounded by a dismantling rod, the buffer in the original bar can be transplanted into the FRP anti-corrosion surrounding, otherwise the safety is not guaranteed.

The role of the rear wing is to improve reliability, which is more important for a high-horsepower car, but its driving power suffers compared to a car with a smaller displacement. The rear wing of the car is a kind of spoiler member, which has the characteristics of improving the working pressure and the stable balance of the body during driving. However, if the calibration is not very good, the gains outweigh the losses.

When the general speed is more than 100 kilometers, the actual effect of the rear wing of the car is very significant.

What national regulations do you need to pay attention to when modifying a car?

Car modifications are limited. If you modify it casually, you won't pass the annual review, and then it will be troublesome. Therefore, car modifications must be carried out in accordance with the relevant regulations.

Nowadays, the transportation department is still very strict on the modification of cars, and the parts related to the performance parameters of the car, such as the exhaust volume of the car and the turbocharger, are not allowed to be modified without authorization.

Relevant laws and regulations impose restrictions on modifying cars. The model, specification, engine model, and frame number of the vehicle shall not be changed, and the body structure shall not be damaged. If the engine, body or window frame of the car is replaced, it is also necessary to submit the technical inspection and confirmation of motor vehicle safety production, and the total area of the car sticker shall not exceed 30% of the body area.

If it is exceeded, it must be approved by the relevant department; The appearance of the vehicle cannot be significantly modified, and the regulations are basically the same as those on the driver's license of the vehicle.

When modifying the car, first of all, we must adapt to the improvement of the ignition device of the empty lithology, so that the power can be improved, and then we must improve the pure kinetic energy of the flame and the zero line of ignition, and then we must choose high-quality FRP anti-corrosion, to be modified within the scope permitted by law, if we want to coat the car film, do not exceed the body area of 1 3, if you want to increase the horsepower of the car, you can increase the rear wing.

Be sure to go to the vehicle management office to report before the big one, and then try not to choose too much change when modifying the car, do not change the early shape of the car, try not to replace the engine, do not change the gearbox to search for information, and when modifying the car, the color should be as far as possible to distinguish the vertical do not choose yellow, blue and red, and be sure to go to the relevant departments to register after the modification.

Be sure to go to a professional repair shop or a 4S shop, don't destroy the hardware of the car when modifying the car, don't destroy the engine, don't destroy the gearbox, and then in the process of modifying the skin, you must pass the approval, you must get the permission of the law, try not to improve the ignition system, and after the modified car, you must go to the car tube to report the fuel trap key, such as the appearance color.

It is necessary to pay attention to the choice of color, pay attention to the standard of modifying Bi Quietan, and also go to the vehicle management office to report, do not blindly upgrade the wheels. To understand the basic rules of modification.

It's human nature to make mistakes. Some car buyers are not satisfied with the original car interior and want to modify the car interior according to the modification factory after buying the car. Interior modifications are generally just modifications to the seat fabric, headliner material, or speaker system.

Examples of car interior modifications are as follows**. How much does it cost to modify a car interior?

Domestic anti-leather fabrics will be much more cost-effective, ** around 2000 yuan. But the actual ** depends on the specific situation, and the total price is not easy to say.

Examples of car interior modifications.

There are two types of car interior modifications, one is luxury style and the other is performance style. If you want to make the interior more luxurious, you can replace the fabric of the seats with more high-end leather goods, and paint the roof with patent leather. The luxurious atmosphere of the whole vehicle will be greatly enhanced.

If you want to take advantage of the performance benefits, you can also consider replacing the sports car seats or carbon fibre trim panels.

What do you need to pay special attention to in interior renovation and renovation?

When modifying, find a technical modification factory, and try not to cover anything at the airbag ejection site. Otherwise, it is very easy to have a bad situation where the airbag cannot be deployed or causes secondary injury to employees after it is deployed. Secondly, buy decorative panels online and try to choose formaldehyde-free products.

The trunk is an enclosed space, and excessive indoor formaldehyde can endanger the physical and mental health of hitchhikers.

Millions of car purchase subsidies.

Mechanical modification has not yet been dued in BAI China

Allowed, so Hangzhou zhi

There is also no modification company in this area. Occasionally from.

The one who whistles by our side.

One or two brave cool cars are basically purchased by the owners from other places, and then entrusted to local car repair shops or decoration companies for processing. In addition, I would like to remind everyone that the configuration added in the car modification must be insured separately to be effective; Whether it is the modification of appearance or machinery, it involves driving safety, so the premise of modification is still safety.