The TV set top box shows 000, what should I do? 20

1. Wired set-top box.

1. Turn on the switch of the set-top box and the TV, and wait for the set-top box to start;

2. After the set-top box is started, press the "Menu" button of the remote control of the set-top box;

3. Enter the "Menu", then use the arrow keys of the remote control, find "System Settings", and click the "Confirm" button of the remote control to enter;

7. Return to the TV big screen **TV.

2. Satellite set-top box.

1. Turn on the set-top box and TV;

2. Press the "Menu" button on the remote control of the set-top box, find "System Settings" and enter;

5、After searching,Press"Exit"Return to the TV screen。

Hello, I have seen your question and am sorting out the answer, please wait a while

How to restore the factory settings of the network set-top box:

1. Press the "Menu" button of the remote control of the set-top box; Expert.

2. Then use the up and down buttons of the remote control device, select "System Settings", and "Confirm" button to enter;

3. In "System Settings", use the arrow keys to find "Factory Reset" and click "OK".

4. A password box for entering the password will pop up, and the password will be entered correctly.

5. A dialog box pops up again for the user to confirm whether to restore factory settings, and select "OK;

6. Successfully restore the factory reset system.

The reasons why the digital double vision set-top box shows p*** are:

1. The signal transmission of the current BAI connection of the set-top box is du

into the machine that has a problem leading to it.

The satellite set-top box shows 000, which means that the signal has not been received, and the angle of the outdoor satellite pot needs to be adjusted. The antenna needs to be placed outdoors, in an open place in the southwest, and there can be no obstruction in front, otherwise it is impossible to receive the signal.

Everyone. To check the signal strength, press the F1 button first, and then press confirm, you can check the signal strength, if there is no strength, it is possible that the line between the high-frequency head and the set-top box is not connected. The signal strength is there, but there is no signal quality, that is, the satellite antenna is not adjusted to the correct position, and the angle of the antenna needs to be adjusted.

Under normal circumstances, after the green light is on, you can watch the program by turning on the set-top box. Sometimes the green light will prompt the T02 error, at this time, you can turn on the TV and check the signal quality value on the TV.

Press the F1 button on the remote control, and then press the "OK" button in the middle, and the signal strength and signal quality values will be displayed. Continue to fine-tune the satellite pan.

It is not necessary to pay attention to the value of the signal quality and the signal strength to achieve the highest value. The signal quality is generally more than 70% and you can watch it normally.

Summary. Possible reasons for the wired set-top box error message: 1. An application of the set-top box software occupies a large amount of memory, resulting in an error message for the set-top box.

2. The set-top box conditional access (CA) module has some abnormal prompts for program authorization. 3. When the transmission signal or the user misoperates, the set-top box will make a corresponding error prompt.

Possible reasons for the wired set-top box error prompt: 1. An application of the set-top box software occupies a large amount of memory, resulting in an error message for the set-top box. 2. The conditional reception (CA) module of the set-top box has a rough prompt for some foreign fibers authorized by the program.

3. When the transmission signal or the user misoperates, the set-top box will make a corresponding error prompt.

So what do you do to see TV?

The set-top box is repositioned as follows after the 002 location information is changed:

1. When there is a high return window for "location information changes, please contact the customer service center", you first need to restore the factory settings of Huhutong: open the "main menu" of Huhutong, find Qi Sanyu and go to the "System Settings" item to enter;

2. From the "System Settings Need to Enter Password" window that pops up, enter the super management authority password "9999" and press the "OK" button on the remote control to enter. 3. Then switch to the "Factory Reset of Finch Bush" tab, and press the "OK" button on the remote control to perform the factory reset operation. As shown in Fig

4. Next, turn off the power of the set-top box and open its back cover, insert the local ** card (Unicom, mobile card) into the SIM card slot, and insert the smart card at the same time;

5. Turn on the power of the set-top box again, and turn off the power of the set-top box when the "Position module abnormal" prompt window appears on the screen;

6. Then Lu Lao reinserts the encryption card that comes with the set-top box, restarts the boot, and the set-top box will automatically search and restore TV programs, and at the same time, you will find that TV programs can be normal**, you can remove the SIM card of the mobile phone, and you are accompanying the state to use the set-top box to **TV programs.

Try it at home. Well, okay.

First, turn off the power of the set-top box; Secondly, unplug the wired plug behind the set-top box, secondly, open the set-top box to start broadcasting, you can broadcast to **1, the screen shows no signal; Now next install the wired set-top box that was unplugged earlier. Now the above problems can basically be solved.

It's a re-search, and it's been restored.

Turn off the phone, reinsert the card, and then search the station.

Hello dear, glad to answer for you [pleasant]. The solution to the 000 display of the kiss TV is as follows:1. Check whether the network connection of the TV is normal and stable; You can enter the network settings interface of the TV to check whether the network parameters are normal; Generally, the TV can be restarted.

Then reconnect to the network to solve the problem; 2. Check whether there is a problem with the router connected to the TV, and the network will not be available for the first time; Generally, you can refile the Yuqi router to solve it, and if necessary, you can also reset the router and then reset the parameters of the router; 3. Call the local network service provider to confirm whether the current network server is normal and whether the communication link is normal. Generally, if there is a fault or broken circuit, it may cause the user to be unable to access the Internet, and only need to report the error and the service provider will troubleshoot and repair the problem. 4. If there is a problem with the system of the TV and the network is disconnected, the system can generally be restored to factory settings or upgraded to the latest version. 5. If the hardware failure of the TV causes the TV to report an error in the network, such as the failure of the network module, the internal circuit or the failure of the motherboard and components, etc., it is recommended to contact the after-sales service of the TV for maintenance and resolution. I hope this service can help you, you can click on my avatar to follow me, and ask me again if you have any questions in the future, looking forward to serving you again. Good luck to you:

Have a good life and everything goes well<>