Can anyone name some ways to paint it?

There are many ways to do this, so I'll tell you a few first.

Paint brushing process method: There are six kinds of coating spraying methods: brushing, wiping, painting, painting, roller coating and spraying process. Brushing is a method of scraping thick architectural coatings with a scraper.

Previously, it was used as oil-soluble topcoat, sizing lacquer, alkyd varnish, etc. In post-modern furniture and home decoration work, brushing is mostly used to scrape putty powder.

or fillers. Rubbing refers to using raw materials with good oil absorption such as rags, cotton fibers, and yarn as coating tools, and taking a certain amount of scraping raw materials and evenly applying them to the surface of the coated wood to achieve the purpose of filling holes and coloring. At this stage, it is generally used in coloring processing processes such as colored plate sealant, wood texture treasure and Grace.

The painting should be done by hand with a brush as a painting tool.

Lacquering is a method in which architectural coatings or additives are evenly applied to the surface of an object to produce a uniform and flat coating. Roller coating is a spraying method carried out by rollers or rollers of mechanical equipment, and it is only suitable for the floor plan of the object.

Spraying, rock color stone such as man-made plates.

Thick cardboard, walls, etc., mainly used in spraying buildings, boats, cars, walls, etc.

The spraying process is a spraying method in which all the coated material is immersed in a container filled with paint, and then removed from the tank in a short period of time, and the excess coating liquid is re-flowed back to the tank. Coating is the use of architectural paint viscous spraying method, the architectural paint into a certain width of the prologue shape, constantly falling out from the top, at the bottom, by the conveyor belt to transport the coated object under the paint curtain according to the spraying, the architectural paint that has not been sprayed on the surface of the coated object can be retrieved, assisted by the pump circulation system.

Therefore, the consumption of architectural coatings is small.

Attention needs to be paid to the paint brushing process: when the wall is brushed and the painted wall is checked, you can use the back of your hand to rub the wall continuously, and if you feel smooth and smooth, it means that the time is in place. If you feel astringent to the touch, and then look at the wall from the backlight position, if the surface layer is uneven, there are obvious traces of the barrel walking, indicating that in the construction process, the number of times the wall is painted is far from enough, and the thickness of the architectural paint layer does not meet the requirements.

Normal brushing should be carried out once and twice the steps of painting, and everything is shoddy from the flatness of the surface.

Express it. Qualified engineering projects will look very symmetrical under the backlight, and no traces of the roller brush can be seen.

1. Choosing the right painting tools and brushes can better cover the original color of the bottom layer, make the paint film more durable, and withstand repeated scrubbing.

2. Clean up the surrounding environment before brushing the oil to prevent dust from flying and affecting the quality of the paint.

3. The surface of the painting should be repeatedly polished with wood sandpaper to make the surface smooth, and the residual glue of wall joints and other glues should be scraped off with a scraper or sandpaper.

4. During the construction of the paint, the number of brushing times should be determined according to the design requirements and quality standards, and the wood grain should be clear, bright and soft, smooth and ungearless, the color is consistent, there is no brushing and no wrapping, the phenomenon of falling skin, no missing brush, horizontal and vertical, and the adjacent surface of the paint and hardware accessories are pollution-free.

1. Choose the right brushing tools and brushes.

tools produce a thicker coat that better conceals the original color of the underlying layer and makes the film more durable and withstands repeated scrubbing.

2. Before you start painting the wall.

The dust and dirt on the wall should be removed with ordinary detergent or clean water, and it should be dried. If there is a nail hole in the wall, fill it with filler. Tiny cracks can be filled with a good quality caulk.

3. Painting the interior wall.

First, use a brush to paint a "frame" on the outer edge of the wall, and then use a roller to roll inside the "frame". An effective way to apply a roller is to use a roller dipped in paint to roll out a large "W" or "M" shape on the wall, then fill it with it and roll it in different directions.

Note: Before painting, it is best to paste the baseboard, door, wardrobe, corner line and other handover parts with paper to avoid staining, and tear it after completion; It is best to use latex paint, or other materials of one brand, one model, and it is best not to use multiple brands at the same time, so as not to cause color difference and quality problems.

In addition, it is relatively troublesome to brush latex paint by yourself, especially when you want to renovate the wall, you may wish to find a professional live service to help solve it, no need to move and do it yourself, easy and trouble-free.

Roll directly on the wall with a roller brush, taking care not to absorb too much paint with the rollers.

What is wall scraping? How do you go about painting the walls?

Painting the surface of the wall is a necessary step in beautifying the wall and is the final step in the wall structure. A good paint job will not only give the house an attractive look but also compensate for the flaws of the hidden architecture.

What exactly is the practice of wall covering? What is wall scraping?

1.Clean the surface of the wall: remove the peeling and loosening of the wall surface, clean it with cement mortar, wipe it with a shovel residue and then sweep the surface of the wall.

What is wall scraping?

2. Interface treatment interface agent: The interface agent adopts the solid UU of the nest wall in the United States. The Nest Wall is a polymer interface treatment for concrete.

The appearance is milky white and viscous. Because the solid wall has excellent permeability, it can completely wet the surface of the substrate, make the substrate layer dense, improve the adhesion of the interface, improve the bonding strength of the mortar or putty and the wall, and prevent hollow drums.

What is wall scraping?

3. Original crack treatment: cut the crack with a scraper and fill the gap as deep as possible. Be sure to do it and get it done in a uniform way. Then glue kraft paper to the cracked area, let it dry, and then apply putty or other processes to dispose of it.

What is wall scraping?

4. Anti-crack treatment: insulation wall, no-load wall filled with fiber mesh, all glue is made of mesh ecological white latex. In order to change the water and electricity and eliminate the cracks in the wall, use the white kraft paper bag of the "Construction **" brand to paste; The same use is ecological white latex.

What is wall scraping?

5. Putty: The number of putty can be determined by the flatness of the key or the wall, the more the better, the thicker the putty, the easier it is to crack. The general case is two to three times, the putty must be waterproof, and the nest used is easy to scrape.

The first pass is scraped horizontally with the scraper, next to the scraper is a scraper, the seal is not left, and each scraper is clean and tidy. Once dry, sand the paper, wipe off the floating putty and stains, and clean the walls. Scrape vertically with a spatula for the second time.

The materials and methods used are the same as for the first putty. After drying, smooth and clean the sandpaper. In the third pass, use a scraper to find the putty, scrape the surface of the wall, dry it and wipe it with fine sandpaper.

After each opening of the putty, it should be dried for as long as possible and ventilated as much as possible to minimize indoor humidity. If the putty does not dry, repeat the putty or apply it with a brush and retain too much moisture, and the walls will appear "sweaty" even in large cracks.

6. Brushing: The top and load-bearing walls can be drawn to prevent crackingGenerally speaking, the wall is insulated, and the wall is not bearing, try to choose elastic latex paint with good crack resistance. The primer must be alkali-resistant, try not to brush the topcoat.