What are the uses of the carton compression testing machine?

There are more uses

1. Empty container compression.

2. Packaging stacking test.

3. Pallet stacking.

4. The tray is bent.

5. Compression test of various types of samples.

Please read the instruction manual of the testing machine carefully before operation to understand the performance parameters, structure and safe operation requirements of the testing machine.

Before using the testing machine, please confirm whether the voltage of the power supply family is stable to avoid the test data being inaccurate due to too high or too low electrical and land response voltage.

The testing machine should be placed on a stable ground to avoid shaking during use.

Before installing the specimen, please clean up the debris inside the testing machine to ensure the sensitivity of the testing machine.

Operators should pay attention to safety when using the testing machine to avoid safety accidents caused by the high-speed movement of the testing machine.

At the end of the test, please pay attention to the inside of the testing machine to avoid unnecessary troubles during the next test.

If you find that there is an abnormality in the testing machine, please stop using it immediately and ask a professional to overhaul it.

The precautions for the operation of XYD-15K carton compression testing machine are as follows:

After use, the power supply needs to be cut off.

The power supply is one-way AC 220V 50Hz and is well grounded. The neutral wire and the ground wire cannot be mixed and cannot be connected together.

Avoid using it on the same line as high-power equipment.

It cannot be used in a working environment with high humidity.

It cannot be used in a working environment with severe vibration and strong electromagnetic interference.

It is strictly forbidden to be unmanned.

The test object must not exceed the range of the equipment to avoid damage.

Carton testing equipment includes: automatic burst strength testing machine, ink decolorization testing machine, carton compression testing machine, electronic paper tensile testing machine.

1. Automatic crack strength testing machine.

Uses: This product is used to test the adhesion of the ink, in order to judge the quality of the ink. This machine can do dry grinding test, wet grinding test, decolorization change test, paper fuzz test and special friction test.

2. Ink decolorization testing machine.

Uses: This product is used to test the adhesion of the ink, and to judge the quality of the ink. This machine can do dry grinding test, wet grinding test, decolorization change test, paper fuzz test and special friction test.

3. Carton compressive testing machine.

The carton compressive testing machine is the most direct test instrument for testing the compressive strength of cartons or other packaging containers, which is used to determine the compressive strength of cartons, and can be used to test the pressure stacking, and the results of the test can be used as an important reference for the height of finished packaging boxes stacked in the factory or an important basis for designing packaging boxes.

4. Electronic paper tensile testing machine.

Uses: The electronic paper tensile testing machine is an ideal die section equipment for determining the physical properties of paper and cardboard, such as tensile strength, elongation at break and tensile energy absorption value.

The compressive testing machine is the most direct test instrument for testing the compressive strength of cartons or other packaging containers, which is used to determine the compressive strength of cartons, and can be used to test the pressure stacking, and the results of the test can be used as an important reference for the height of finished packaging boxes stacked in the factory or an important basis for designing packaging boxes.

Weighing, generally within the range and the measurement accuracy can meet the requirements of the object can be weighed; Because the general carton compression machine has a peak automatic stop function, which is also the most important feature of the compression machine, so it can measure the instantaneous pressure, measuring the carton compression is this function, the deformation of this function is a lot, such as counting how many kilograms are in a punch and so on, other functions are the extension of these properties, infinite imagination.

Key features:

1. Strength test: the instrument can test the maximum pressure resistance of cartons and other boxes;

2. Fixed-value test: the instrument can preset data as required to detect whether the box can meet the preset compressive or deformation requirements;

3. Stacking test: According to the requirements of national standards, stacking tests under different conditions such as 12 hours and 24 hours can be carried out;

Main technical parameters:

1.Power supply: AC220V 10A 50Hz

2.Measuring range: -50kN (i.e. 5 tons).

3.Indication error: <1 %.

4.Platen area: 500 500 mm 1000mm etc. (customized according to customer requirements).

5.Working stroke: 500mm mm, etc. (customized according to customer requirements).

6.Parallelism of upper and lower pressing plates: <2mm

7.Pressurization speed: 10 mm min

8.Return speed: 100mm min max

9.Display: Chinese dot matrix menu.

10.Printer: Thermal printer (optional needle punching), using imported print head, printing high-speed and silent.

11.Communication output: standard RS232 interface.

12.Environmental conditions: temperature 10 30, relative humidity 85

Standard: ISO 12048

gb tgb can whiteness hangzhou paper state to find xiao zhou.

1. Compressive strength test: the instrument can test the maximum pressure resistance of boxes such as cartons;

2. Set force or deformation test: the instrument can preset data as required to detect whether the box can meet the preset compression or deformation requirements;

3. Stacking test: According to the requirements of national standards, stacking tests under different conditions such as 12 hours and 24 hours can be carried out;

The main parameters should be selected according to your test carton size or requirements.

Jinan Bangke testing machine.

It is mainly to test the compressive resistance of the carton, and the tensile strength of the carton hand-held hole can also be measured, and the main standard refers to the "National Standard for Corrugated Cardboard".

Compression testing machine is a kind of large-scale test equipment, this equipment is designed for the pressure test of transport packages, due to the use of modern electronic technology, the measurement and control system of the equipment is very advanced, the use of this equipment can not only carry out carton compression test, but also can simulate the working procedure of the stacking test for stacking strength test, in addition to the set value pressure test. The compression testing machine is an indispensable test equipment for the quality inspection of finished carton products.

The production of this machine is controlled by a calculator, with high precision, and is the most direct test instrument for testing the compressive strength of cartons or other packaging containers, which is used to determine the compressive capacity of cartons, and can be used to test the pressure stacking. The results of the test can be used as a factory stacking finished product box height.

Most of them can be said to be the same machines! Among them, some pressure testers can do carton compression tests, and some cannot!

The carton compression testing machine can withstand pressure, deformation and stacking tests of corrugated cartons, honeycomb panels and other packaging, and take into account the compressive tests of plastic barrels (edible oil, mineral water), paper barrels, cartons, paper cans, container barrels (IBC barrels) and other containers.

Extension of knowledge points:

The carton compression testing machine is suitable for electronics, electrical appliances, wires, hardware, bicycles, handbags, food, medicine, shoes, furniture and ...... packed in corrugated boxesand other factories to use. Good compressive performance can ensure that the contents will not be damaged during transportation and storage; At the same time, it can also guide the production of packaging box manufacturers according to the different contents, which can be used for professional instruments for food packaging QS certification.

Kunshan Haida carton compression testing machine can carry out 3 tests.

Strength test: the maximum pressure and displacement of the box can be measured;

Constant value test: the overall performance of the box can be tested according to the set pressure and displacement;

Stacking test: According to the requirements of national standards, stacking tests under different conditions such as 12 hours and 24 hours can be carried out;

1. Compressive test:

Driven by servo motor, reducer deceleration, mechanical transmission, the upper pressure plate moves at a constant speed of 10mm min 3mm min, and the load is applied to the sample until the predetermined value is reached or the test sample is damaged before the predetermined value is reached, and the maximum load is recorded if the damage is recorded.

2. Stacking test:

The test is carried out using one of the three test methods mentioned in the GB T static load stacking test method, maintaining a predetermined load for a predetermined period of time, or maintaining a predetermined load value until damage, such as the time elapsed by the damage record.

Click on the carton pressure tester to learn more about the detailed carton pressure testing machine parameters.

What are the measurement parameters of the carton compression testing machine? Kunshan Haida Instrument reminds you that the carton compressive testing machine is mainly used to test the compressive strength of cartons or other packaging containers, the most direct test instrument, used to determine the compressive capacity of cartons, and can be used to do the test of pressure stacking, the results of the test can be used as an important reference for the height of the finished packaging box stacked in the factory or an important basis for designing the packaging box.

1) Test method of carton compression testing machine.

The equipment used in the pressure test of cartons is a special pressure testing machine for cartons, which has two pressurized plates with a large area, and the area of the common upper and lower pressure plates has two specifications: 1m and 1m. Among the two pressurized plates, one is a supporting plate, and its position can be adjusted according to the size of the specimen to make it have a suitable height, and then fasten it; The other is a pressurized plate that slides along the guide rod (column) to apply pressure to the specimen.

The maximum working capacity of the testing machine is 50 kN (5000 kgf), and the pressure plate movement speed is 10 mm min, and there are also 1 inch min. The equipment should be equipped with a displacement indicator with a measurement accuracy of not less than , and some testing machines have an automatic recorder that can record the load-deformation curve on its own.

2) Strength test: the maximum pressure and displacement of the box can be measured;

Constant value test: the overall performance of the box can be tested according to the set pressure and displacement;

Stacking test: According to the requirements of national standards, stacking tests under different conditions such as 12 hours and 24 hours can be carried out;