How to turn on the air conditioner to save the most electricity, please 3Q

1. Set the appropriate temperature, the best temperature is 26-28 2. The filter screen should be cleaned frequently, and it is better to clean it once every two weeks 3. Improve the maintenance structure of the room to ensure the thermal insulation effect of the material and sealing 4. Choose an air conditioner with moderate ability, too high or too low power will make the air conditioner consume abnormal power 5. Avoid direct sunlight, and save about 5% of electricity in summer 6. Close the window when opening the air conditioner, and avoid opening the doors and windows frequently 7. The height of the air outlet is moderate, the wind deflector is downward during heating, and the air deflector is horizontal during refrigeration, and the effect is better 8. The piping of the air conditioner is short and not curved, the refrigeration effect is good and does not consume electricity 9. Keep the air outlet smooth, do not pile up large pieces of furniture to block heat dissipation, and increase unnecessary power consumption 10. Turn off the air conditioner in advance, generally ten minutes before leaving home, that is, turn off the air conditioner, which may save electricity. The airtightness of the air-conditioned room must be good, and the windows should be closed tightly to keep the cold air from draining. If the light in the room is too strong, the curtains can be closed during the day to block part of the heat, and it is best not to enter and exit the room too frequently.

11. In order to save electricity, some people often turn the air conditioner on and off, but in fact, the frequent switching of the air conditioner consumes the most electricity, and the compressor is easy to lose. 12. During the operation of the air conditioner, if it is too cold, there is no need to turn it off, as long as the set temperature is increased.

1. Set the appropriate temperature when using the air conditioner, which should not exceed 20 in winter and not lower than 26 in summer. Usually, 28 is the most power-efficient temperature. Studies have shown that for every 1 degree of indoor temperature reduction in air conditioning in summer, power consumption will increase by 5% 8%, and 2 degrees higher than the set temperature can save 20% of electricity.

2. Make reasonable use of sleep mode. When sleeping, using sleep mode is the most power-efficient. Because, when people sleep, their metabolism will decrease by 30% to 50%.

As long as you set a suitable temperature and select the sleep mode, the machine will turn off when it reaches this temperature, and vice versa.

3. Learn to use dehumidification mode. In summer, the air temperature is high, and as the humidity increases, the perceived temperature also rises. The dehumidification mode removes a large amount of moisture at a low speed and is more power-efficient than the refrigeration mode.

However, the outdoor temperature is high, and the air is dry, so it is not suitable to turn on the dehumidification mode.

4. Clean the filter regularly. Everyone must do a good job of cleaning the filter before using the air conditioner. Because the dust of the filter will clog the mesh holes and increase the power consumption of the empty wax and worm tune.

When using the air conditioner, ensure that the indoor unit filter is cleaned once a month, and the indoor and outdoor heat exchange fins should also be cleaned regularly.

5. The adjustment height of the air outlet should be moderate and unobstructed. The air deflector should be downward when heating, and level when cooling. This is due to the fact that the cold air is condensed downward, and adjusting it to a horizontal state can speed up the air circulation and the effect is better.

Do not place furniture at the air outlet to block heat dissipation and increase power consumption.

6. When turning on the air conditioner, close the chain curtain of the indoor window, which can block the sunlight and avoid direct sunlight, which can save 5% of electricity. This saves power and prevents tanning.

7. Don't turn on and off the air conditioner frequently. Frequently turning on and off the air conditioner will consume a lot of electricity, and there will also be a loss to the air conditioner itself. Air conditioners consume the most power when they are turned on, so don't turn them on and off frequently. In addition, turning off the air conditioner 10 minutes before going out can also achieve the effect of saving electricity.

1. The power saving of the air conditioner mainly depends on the "start-up rate", and the most power consumption dissipates when starting, so do not switch on and off frequently.

2. The air-conditioned room should be airtight, and the doors and windows should be closed tightly to keep the cold air from being lost.

3. When setting the room temperature, do not take Xiaoshi and the outdoor temperature is not too different, such as 30 degrees Celsius outdoors, and set 25 degrees Celsius indoors.

4. The air conditioning filter should be cleaned frequently, otherwise the blockage of the grille will also affect the refrigeration effect.

5. 5-10 minutes before turning on the air conditioner, the temperature can be raised first, and the maintenance of air supply can save electricity.

Whether the air conditioner is cooling or heating, the smaller the temperature difference between indoor and outdoor, the more electricity is saved.

Attached: Common sense of air conditioning use:

1. First of all, it is necessary to carry out reasonable maintenance of the air conditioner, keep the inside and outside of the air conditioner body clean and clean, and regularly clean the filter screen and the outdoor fin-shaped aluminum foil heat sink to make the air conditioner in the best working condition and achieve the purpose of saving electricity and prolonging life.

2. The temperature difference between indoor and outdoor should not be adjusted too much, when the air conditioning is refrigerated in summer, the higher the indoor temperature is adjusted, the more power saving, and the indoor temperature will increase by 5-8% every time the indoor temperature is lowered by one degree, and it is generally appropriate to adjust it between 26-29 degrees, as long as it does not feel hot. It can also be used in conjunction with an electric fan to improve indoor comfort. In winter, the temperature in the heating room of the air conditioner should not be adjusted too high, and it is advisable to adjust the temperature at about 16-22 degrees, and the higher the temperature, the greater the power consumption, because the air conditioning heating is about twice as large as the power consumption of refrigeration.

3. Try to seal the doors and windows of the room, if the sun is directly irradiated, thickened curtains should be installed to improve the sealing and thermal insulation effect of the room.

4. When the air conditioner is working for refrigeration, the wind deflector of the indoor unit should be adjusted to blow the air in the horizontal direction, and the wind speed should also be adjusted to the automatic wind speed, and the air conditioner will automatically adjust the wind speed according to the indoor temperature. If the air conditioner is blowing directly on the bed or person, you can buy a wind deflector online to use it. On the contrary, when the air conditioner heats and heats in winter, it should be adjusted to blow downward, so that the temperature in the chamber is the most uniform, because the cold air flow is downward, while the hot air flow is upward.

5. In summer, if the outdoor unit is directly exposed to the sun when Zheng Sui pants are working, it is best to install a sunshade to improve the heat dissipation effect.

I have 4 air conditioners at home, and the electricity bill for the first two years was more than 1,900 yuan a month, and I have been studying how to use the air conditioner correctly to save electricity, and now I can save more than 500 yuan in electricity bills a month.

1. The temperature we generally set in summer is about 26, and the temperature of heating in winter is generally set to about 19; This not only saves electricity, but also benefits our health.

2. We set the wind speed of the fan to automatic mode, so that the fan can automatically adjust the speed according to the temperature. If the indoor temperature reaches a suitable temperature, adjust the fan to a vulgar operating state;

3. When we sleep at night, set the air conditioner to sleep mode or energy-saving mode, which can save a lot of messy imitation electricity;

4. Don't change the temperature of the air conditioner frequently, which will cause a lot of loss to the air conditioning compressor and consume a lot of electricity. When we turn on the air conditioner, do not open the windows, if in the room, it is recommended to use curtains to block the sun.

1. Don't turn the air conditioner on and off repeatedly, this is a waste of electricity, turn it on when you want to use it, and turn it off when you don't use it. 2. The indoor temperature is adjusted to 26 degrees, which is also more power-saving. 3. When turning on the air conditioner, if it is used for refrigeration, the tuyere should be facing upward, because the refrigeration speed will be faster, and it will also save more electricity.

4. When you use it in summer, you can close the curtains, which can also save power consumption.

How to choose the right air conditioner.

1. Choose an air conditioner according to the size of the room area, for example, if it is a large air conditioner, the applicable area is about 22 square meters.

2. At the same time, it is also necessary to choose the right air conditioner, inverter air conditioner and fixed frequency air conditioner, and the power-saving principle is also different. If you want to achieve energy savings, you can choose the former.

Data Extensions. An air conditioner is an air conditioner. It refers to the equipment that uses artificial means to adjust and control the temperature, humidity, flow rate and other parameters of the ambient air in the building or the construction chain.

Generally, it includes cold source and heat source equipment, cold and hot medium transmission and distribution system, terminal device and other major parts and other auxiliary equipment.