What should I do if my broadband connection is terminated by a remote computer?

The broadband connection is terminated by a remote computer" is similar to the meaning of the service being stopped after the mobile phone is in arrears.

First of all, it is necessary to determine whether it is a computer virus problem. Viruses can be detected and killed by antivirus software.

If it's not a virus problem, then it's probably the Internet. The player was rejected by the remote server when connecting to the Internet. This problem can be verified by the person who handles the broadband.

Either you couldn't connect at the time, and you connected at another time period.

It is also possible that the existing connection needs to be deleted and a new broadband connection needs to be established.

The details are as follows:

Open the control panel, find "Network and Sharing Center", click "Change adapter settings" on the left, and the window as shown in the following figure will pop up

Check "Broadband Connection" and right-click the "Delete" button.

Go back to the "Network and Sharing Center" interface, click "Set up a new connection or network", and the window will pop up as shown in the following figure:

Click "Connect to Internet" in the picture above, and the window will pop up as shown in the figure below:

Click "Broadband (PPPoE)" as shown in the figure above, and the window will pop up as shown in the figure below

In the image above, enter the username and password, then check "Remember this password" and click "Connect".

2. If you are in arrears, you will be locked.

Solution:1Check to see if you have entered your password incorrectly, noting the decimal point or a space.

2.Check whether the NIC driver is normal. Steps:

Right-click on my computer Properties Hardware Device Manager Click the plus sign in front of "Network Adapter", and then you can network card driver is normal, if the driver is not normal, is there in front? No. or! No.

3.Check whether the network cable is successfully connected. (See "Local Connections")4

Check whether the broadband is overdue or expired. (Call your local network operator** for inquiries)5I've tried the first four items, and if it still doesn't work, turn off the computer and the modem together.

Wait 5-10 before reconnecting. It is possible that your broadband is not going offline abnormally, and the broadband service provider thinks that you are still on the Internet. You'll get "Error 629" or "Error 691" when you're on it.

If there is no problem in the front, it should be that the broadband remote end has been interrupted. You can call the local network operator** for the solution: China Telecom 10000, Tietong 10050, China Unicom 10010.

You turn off the wireless settings first, and then log in to your router with your classmates to set up 1 password link 2 machines to try, so that you can confirm whether there is a problem with the network, if you can link, take it**Consult the broadband service provider.

The remote computer administrator won't let you log in, what do you say, if it's a crack permission, you can log in with multiple users.

If you don't have the crack permission, you can only log in if someone else's computer administrator lets you log in, which is very simple.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

If the remote computer terminates the connection, the connection will be lost, including all previous requests (the last successful remote connection is not counted). The remote connection needs to be completed with the permission of the remote computer, so if the remote computer terminates the connection, the connection must be restarted and cannot be continued. You can try reconnecting to the remote computer.

Dear Hello We are happy to answer your question if your campus broadband connection is terminated by a remote computer, it may be due to system settings or network reasons. You can try the following methods to solve the problem:1

Check whether the network connection is normal. If you're using a wired connection, check to see if the network cable is loose or disconnected. If you're using a wireless connection, make sure your other devices are connected.

2.Restart your computer and router switch, then connect to campus broadband again. 3.

Check if your firewall settings are blocking your campus broadband connection. You can temporarily turn off the firewall or add a campus broadband connection to the whitelist. 4.

Check whether there are other programs on the computer that are occupying network resources, such as spring mining tools, P2P software, etc. If so, turn them off and connect to campus broadband again. 5.

If none of the above works, you may need to contact your campus broadband service provider for troubleshooting and repair.

Summary. 1. Check the username and password: If your username and password are entered incorrectly, it is likely to cause a 629 error, re-enter the username and password, and see if your uppercase key is turned on when entering, resulting in an error in entering the username, and double-click the username after the input is completed to see if there are any extra spaces.

2. Replace the line: the aging of the line connecting the network or the failure of the crystal head may cause us to fail to connect the network, and there is a 629 error, at this time, we only need to replace the aging line or the fault of the crystal head to solve the problem, the cause of this failure is not easy to judge, if other methods can not solve the problem and then consider whether it is a line problem. 3. Replace the modem:

Modulation modem, is what we often say in our daily life, the general modulation moderator has a service life, coupled with some external human factors, will greatly shorten its life, when the modulation moderator is damaged, it is natural not to go to the net, at this time as long as the cat can be replaced.

1. Check the username and password: If your username and password are clearly entered incorrectly, it is likely to cause a 629 error, re-enter the username and password, and see if your uppercase key is turned on when entering, resulting in an error in entering the username, and double-click the username after the input is completed to see if there are any more spaces. 2. Replace the line:

The aging of the line connecting the network or the failure of the crystal head may cause us to fail to connect to the network, and there is a 629 error, at this time, we only need to replace the aging line or the fault of the crystal head to solve the problem, the cause of this failure is not easy to judge, if other methods can not solve the problem, then consider whether it is a line problem. 3. Replace the modem: the modem mediator is often said to be a cat in our daily life, the general modem mediator has a service life, plus some external human factors, it will greatly shorten its life, pure celery when the modulation mediator is damaged, it is natural not to go to the net, at this time, as long as the cat is replaced.

Can you add, I don't quite understand it.

1. Check the username and password: If your username and password are clearly entered incorrectly, it is likely to cause a 629 error, re-enter the username and password, and see if your uppercase key is turned on when entering, resulting in an error in entering the username, and double-click the username after the input is completed to see if there are any more spaces. 2. Replace the line:

The aging of the line connecting the network or the failure of the crystal head may cause us to fail to connect to the network, and there is a 629 error, at this time, we only need to replace the aging line or the fault of the crystal head to solve the problem, the cause of this failure is not easy to judge, if other methods can not solve the problem, then consider whether it is a line problem. 3. Replace the modem: the modem mediator is often said to be a cat in our daily life, the general modem mediator has a service life, plus some external human factors, it will greatly shorten its life, pure celery when the modulation mediator is damaged, it is natural not to go to the net, at this time, as long as the cat is replaced.

There could be two reasons for this:

The routing and remote access services are not configured to receive calls as RAS servers;

Network broadband is shut down due to overdue payments.

Workaround: Double-click the network from the control panel;

Click Services, click Routing and Remote Access, and then click Properties;

Click Port or if you want to enable you to receive calls, click Configure, and then select the port to receive calls for the RAS server;

Click OK, and then restart the computer when prompted;

Just reconnect; Or reopen the control panel network connection and recreate the local connection. If the network broadband usage fee is in arrears, the problem can be solved by paying the network usage fee to the broadband operator in time.