Does Samsung Note4 have fingerprint recognition

Hello! Yes, I am using note4, there is a fingerprint recognition function, and 3 fingerprints can be set for screen unlocking.

Hope it helps, hope!

Yes But it's a sliding type, and it's not as comfortable as a press type.

Hello: According to your question: Samsung Note4 is not supported by the fingerprint recognition function.

Samsung Note4 has fingerprint recognition, and its setting method is as follows:

First go to the phone settings of your Samsung Note 4 and then find the "Fingerprint Scanner" setting.

To set up Samsung Note 4 fingerprint recognition for the first time, you need to set a "backup password", that is, the screen unlock password, mainly to prevent fingerprint recognition unlocking failure in the future, and also allow users to enter the phone through the traditional lock screen password.

After setting up the password, the next step is to set the fingerprint information, Samsung Note 4 supports users to enter 3 fingerprint information, that is, users can enter the information of three fingers. Each fingerprint registration needs to be repeated with the same finger 8 times, which can ensure a high fingerprint recognition rate.

Note: In order to prevent the failure of fingerprint entry, please keep your fingers clean and dry when entering fingerprints, so as not to cause inaccurate fingerprint recognition in the future.

After the fingerprint recognition setting is completed, users can use their fingerprints to unlock Samsung Note4 in the future, Samsung Note4 Fingerprint unlocking is not usually simple, its fingerprint recognition is designed above the home button, that is, the lower edge of the screen, when you need to unlock it through the fingerprint, you need to put your finger from the bottom of the screen at the bottom of the fingerprint icon, after you start to hold it, then you can slide down until you reach the home button, and release it, so that you can complete the Samsung Note4 fingerprint unlock.

How to Operate:1Tap Apps - Settings - Lock Screen - Screen Lock - Fingerprint.

2.Swipe your entire fingertip from the center of the screen down to the Home button and follow the instructions to register your fingerprint.

Samsung Galaxy

The S5 supports the fingerprint sensor function, which can improve the security and convenience of the device, so you don't have to worry about security. With the fingerprint sensor, you can unlock the screen with a swipe of your finger, and to set it up, follow these steps:

1.Under the standby screen, tap Applications.

2.Click Settings.

3.Click Fingerprint Scanner.

4.Click Screen Lock.

5.Select Fingerprint.

6.Click Confirm.

7.Swipe your finger down from the center of the screen 8 times to record fingerprint recognition.

9.After confirming the password, click OK.

Once you have done the above, the fingerprint screen lock is set up successfully.

Samsung input fingerprint setting method: 1. Click [Settings] - [Lock Screen & Security] - [Fingerprint], and then enter the fingerprint according to the prompts; 2. Support up to 5 fingerprints; 3. Click the name of the entered fingerprint to change the fingerprint name or [Delete Fingerprint].

Note4 supports fingerprint recognition, which can be used for screen lock, login, and verification of Samsung accounts.

Samsung Galaxy Note4 has fingerprint recognition, but when fingerprint recognition, the finger is unlocked by sliding the front home button from top to bottom, and you need to light up the screen and then slide your finger to unlock it, which is very inconvenient.

Main screen size: inches.

Resolution: 2560 1440

CPU model: Qualcomm Snapdragon 805

Processor cores: Quad cores.

RAM capacity: 3GB

ROM capacity: 16GB

Battery capacity: 3220mAh

Fingerprint recognition: Yes.

4G: Mobile TD-LTE, FDD-LTE (international roaming only) OS version: Android

Rear camera: 16 million.

Front camera: 3.7 million.

Samsung Galaxy Note4 supports fingerprint recognition sensor function, unlock the screen by swiping your finger, and the setup steps are as follows:

1.Under the standby page, tap Applications and open Settings.

2.Tap Lock Screen to turn on Screen Lock.

7.Swipe down 10 times on the home button of your phone to record your fingerprint, and then tap Done.

Screen: Inches in size; Resolution: 2560 x 1440 (Quad HD); Material: Quad HD Super AMOLED screen.

2.The external volume is: x x ; The weight is 175g.

3.Shell color: white, black, gold, pink (subject to actual sales).

Processor): Quad core.

5.Memory: Total ROM memory is 16GB; The total RAM memory is 3GB; Supports up to 128GB micro SD card.

6.Camera: 16 million pixels for the main camera and 3.7 million pixels for the secondary camera.

7.Bluetooth version: Bluetooth.

Adopt interfaces. 9.Battery parameters: capacity is 3000 mAh.

Hello note4 pink has been officially launched at the time, so you can go to the store to buy.

First open [Settings], find [Lock Screen, Password and Fingerprint] ZHI, and then click DAO [Fingerprint] Click [Add Fingerprint] at the bottom and finally answer according to the system prompts, put your finger on the fingerprint sensor and enter your fingerprint information.

After opening the settings, swipe the interface online, find the lock screen, password and fingerprint belowOpen the lock screen, password and fingerprint, and find the password and fingerprint.

In this case, you need to enter a numeric password, enter it and click Next.

This brings us to the interface of password and fingerprint, where there will be the fingerprint added earlier, and we can also add a new fingerprint.

You'll be asked to confirm your password. Click Next.

At this time, we need to place the mobile phone in the fingerprint recognition area on the back of the mobile phone, and the fingerprint can be entered.

Redmi Note4 fingerprint recognition setting bai method steps: du [set zhi

[Lock DAO screen, password version and fingerprint].

Then follow the system prompts to set the four-digit password, and then you can add a fingerprint to the Redmi note4. Adding a fingerprint is as simple as following the prompts. The whole process is to put your finger on the fingerprint sensor on the fuselage, and then you can complete a fingerprint entry, as shown in the figure below.

Note: The first time you set up fingerprint recognition, you need to set a 4-digit password first, mainly based on security considerations. Considering that when the fingerprint recognition cannot be used normally or the fingerprint recognition function needs to be turned off or re-enabled in the future, this administrator password needs to be used to confirm, which is similar to the setting principle of most fingerprint mobile phones.

After adding the fingerprint, we can choose to turn on the fingerprint screen unlock, fingerprint payment, private files and other functions.

According to your description, if you want to identify whether the product is refurbished or whether it is licensed, please be sure to bring your purchase invoice, repair card and mobile phone, it is recommended that you go to the local Samsung service center to check whether the mobile phone can be repaired, this is the best and most accurate method. For more information about your local service center, please click on the following link:

Just came out and bought it for real.

Finger Locust Pattern Unlock is an app on smartphones, which is a screensaver unlocking software that uses the user's fingerprint data and records for verification.

With the advancement of technology, biometrics are gradually being used in the field of consumer electronics to identify and avoid the trouble of input. The iPhone launched by Apple last year