-
The reasons for iPhone4S automatic restart are as follows:
1.Check whether the installation is abnormal and causes automatic shutdown;
2.Whether the metal removed from the battery is loose or damaged;
3.If you have a battery problem, you need to find an after-sales replacement;
4.Software problems, has there been any incompatible software installed recently that causes automatic shutdown;
5.Hardware problems, this needs to be found after-sales testing to determine the problem.
-
90% of the problem is with the plugin reinstalling the plugin, deleting the plugin or reinstalling the system.
-
Restore factory mode and then re-jailbreak, I guess that's all it can be.
-
Here's how to solve the problem:
1. The first thing to do is to restart your iPhone and press the "Sleep Wake" (also known as the power button) and the Home button at the same time until you see the Apple logo displayed on the screen.
2. Some users solve this problem by selecting "Settings" - "General" - "Reset" - Reset All Settings. The user will need to re-enter the password, change the wallpaper, and reset the Touch ID, but the user's data will not be deleted.
3. Users who encounter iPhone touch screen failure also solve the problem by restoring factory settings, but all the information on the phone will be lost, so users need to back up the important data in the phone in advance. After that, users may need to set up their iPhone like a new phone, and some users say that restoring backed up data from iTunes or iCloud will cause this problem to arise again.
-
If you have jailbroken, it may be that some software is incompatible, and you may want to think about what software you have installed before.
If you haven't jailbroken then you may have a problem with the machine itself, go to the after-sales inspection machine, they should be able to find the cause of the problem.
-
I haven't encountered it, so try it after recovery.
-
1、Generally, it is the problem that an application of the system is incompatible, I just bought it back for 1 month, and there was a black screen 5 times, and finally after the after-sales inspection, the system was restored to normal.
2. If the home button and power button are useless, and the charging only reacts, it means that it is a battery problem.
3. If any buttons are useless, charging is useless, and connecting to the computer is useless, it means that the motherboard is a problem or the screen is aging.
After reading the description of the landlord, it is likely to be problem 1, don't worry, there are thousands of people across the country who have encountered the same problem as you, and it will be solved after the next sale, and by the way, you can sprinkle your anger on the after-sales body.
-
You should be jailbroken for 4s, but the phone will be unstable after jailbreaking, which is normal.
-
It's normal.,It's not a big problem.,Don't think it's Apple that won't have this kind of problem.,It's a fake crash.,It's good to restart it after a while.,This is also the case with my friend.。
-
The standard for checking the iPhone is to connect the phone to the computer to see if iTunes can recognize it, the fake iPhone is all Android kernel, and it can't be connected to iTunes.
-
1. Generally speaking, if there is a problem with the mobile phone, the first thing is to see if there is a mistake in the mobile phone settings. So open the settings first.
2. Find iCloud in the settings, and open it to enter iCloud (which is your Apple account and related login information).
3. Find "Documents & Data" in iCloud and open it to enter it.
4. Click the switch on the right to turn off the switch that has been turned on for "Documents & Data".
5. Remember to take a look at the prompts that appear. Then turn it off, and then you can disable the iWork suite in the iCloud sync option.
The performance of Apple's mobile phone is generally okay, but it is inevitable that there will be bad situations, such as stuck, blue screen, etc., just try the above methods when encountering this situation.
-
Restore the system.
Press and hold the power off button and the home button to restart.
After restarting, release the power on and off button, but keep holding the home button.
Wait for the screen to light up, connect to your computer and connect to iTunes
Then follow the steps to restore your phone.
-
The system is out of order,,- this hundred years has not happened to you to catch up, first try to press and hold the lock screen button and the home button to force the shutdown and then turn on to see what happens. If something goes wrong, you'll have to restore the system.
-
Connect iTunes point recovery, wait a minute, oh.
-
Forced shutdown is good,It's to press and hold the power on and off button and the home button,Seven seconds can automatically shut down,As for whether it's still a blue screen,Then it's a character,After shutting down,You can repair your phone from the mobile phone repair shop。
-
After the iPhone 4S falls, the screen becomes a blue screen, which cannot be turned off or restarted, and the phone can be put into DFU mode and then re-enter the phone. The steps are as follows:
1. Press and hold the home and power buttons for 10 seconds - release the power button but the home button continues to press for 15 seconds, and the phone screen is black.
2. Install the latest jailbreak software on the computer, open the software to identify the phone, and the software jumps to the installation mode immediately after the phone is connected to the computer, indicating that it has entered the DFU mode, and this process does not require the mobile phone to perform jailbreak operation.
3. Start your phone and check if the phone fault has been eliminated.
-
Ever tried holding the home + power button at the same time for ten seconds?
-
The graphics card is broken, go to the store and ask someone to replace the screen behind, don't change the screen, it's too expensive, one costs more than 1000.
-
Forced shutdown, colleagues press the shutdown button and home button, and then turn it on to enter safe mode, it's OK, if not, you can only send it for maintenance.
-
Power button + home button and press and hold for about ten seconds at the same time to restart the device.
-
**Buy a screen, there are any prices, one or two hundred cheaper, change the screen slowly.
-
Press the above Jian and home to build together, if it doesn't work, you can only take it to repair.
-
Go to Apple after-sales service for repair immediately.
-
If it's broken, take it to the shop and repair it.
-
The graphics card is broken, change the screen to solve the problem.
-
The black screen when iPhone4 Plus is turned on may be caused by the mismatch between the software model and the phone, and the error of the phone's system.
Enter your email account, set a password, and confirm your password.
Set up three password-protected questions along with answers.
Select a payment method. Click Next.
Email verification. Click Install and enter your ID and password.
-
It's frozen, don't worry, press and hold the power on and off button and the home button. Press both at the same time! It's very important, press the screen to pop up the Apple logo and release it, it's OK, it's a forced restart! If Apple doesn't think it's damaged, the hardware isn't easy to break!
-
Force shutdown, reboot and try.
-
It's not a system problem, it's a phone hardware problem.
-
There are several ways to solve the problem, and you can see which method works according to the problem of your machine.
1.What should I do if there is a freeze or black screen? At this time, you can press and hold the bottom return button to add the top power button, and the machine will restart.
2.The screen is often black, you can try it by restoring the factory settings.
3.It can be restored by connecting iTunes.
4.If it can't be restored, the machine still doesn't reflect, it may be the hardware or something, it is recommended to send your iphone4s to the authorized service center for testing!
-
In the first step, we first try to long-press the "Power Button" on the top of the iPhone
If pressing and holding the power button does not make your iPhone turn off or restart, then try to press and hold the "Power Button" + "Home Button" at the same time for more than 10 seconds.
If neither of the above methods work, please connect your iPhone to a power source. Then press and hold the "Power Button" + "Home Button" at the same time for more than 10 seconds.
Finally, if it doesn't work, it may be a hardware failure, please go to Apple's local after-sales service for hardware testing.
-
You'd better go fix it.
1 MMS: Settings - General - Network - Cellular Data Network If there is no setting option, please use a needle to take out your China Mobile or Unicom card, wait for 20 seconds and then put it back. Wait until the signal pops up, then you go into the settings and see that there is already an option to set cellular data! >>>More
One: The easiest way to identify whether it is a real Apple is to: press and hold the home button (the one in the middle garden below), and then click the power switch (upper right corner), you will hear a "click" camera shutter sound, this is the iPhone screenshot function, you can see the screenshot there in the film (cameraroll) in the photos (photos). >>>More
iPhone4s Activation Step by Step method.
iPhone4S activation step 1: Press and hold the power button on the top of the fuselage to turn on, and after waiting patiently, the iPhone enters the lock interface. >>>More
You can get it to the repair shop, I don't know if you will charge there, I can solve it for free here! >>>More
There is only one way to activate the iPhone without an ID: bring the mobile phone purchase invoice and the mobile phone box to the Apple retail store, and the professional will log in to the server and unbind the ID and then use the new ID to activate the device again. >>>More