How should CAD calculate the area of top and wall emulsion paint when budgeting?

The pooling coefficient = the sum of the common floor area to be pooled divided by the sum of the floor area of each unit participating in the pool;

The first step is to click on the Drawing Command tab to see the small triangle below.

The second step is to select the regular polygon command.

The third step is to enter the number of regular polygons.

Fourth, after tapping enter, enter a diameter in the selection of the inscribed circle.

Step 5 and select the Area option.

Step 6: Then select the 5 points of the pentagonal shape in turn, and then hit enter.

Step 7: The area and perimeter of the polygon.

Notes:Skillful control of CAD drawing shortcuts can not only quickly get started with CAD to improve your drawing efficiency, but also make it appear more professional in the eyes of customers. Overnight, it will be more and more helpful for you in CAD drawing.

F1: Get help.

f2: Completes the switch between the drawing window and the text window.

f3: Controls whether the object can be snapped automatically.

F4: Digitizer control.

F5: Isometric plane switching.

f6: Controls how coordinates are displayed on the status line.

f7: Grid Appearance Control.

f8: Orthogonal form control.

f9: Grid snap form control.

F10: Polar axis form control.

f11: Object tracking form control.

The perimeter inside is the perimeter of the figure you choose, multiplied by the height to get the wall area, and the width of the Great Wall is the ground or top area. The top area plus the wall area and the area of the door and window are removed to obtain the latex paint area. The area of the door and window is the length of the door and window multiplied by the width and divided by 2 to get the area that should be cut off by the latex paint.

The pooling coefficient = the sum of the common floor area to be pooled divided by the sum of the floor area of each unit participating in the pool;

The first step is to click on the drawing command slag hall tab to know the small triangle below.

The second step is to select the regular polygon command.

The third step is to enter the number of regular polygons.

Fourth, after tapping enter, enter a diameter in the selection of the inscribed circle.

Step 5 and select the Area option.

Step 6: Then select the 5 points of the pentagonal shape in turn, and then hit enter.

Step 7: The area and perimeter of the polygon.

Notes:Proficient control of CAD drawing shortcuts, not only can quickly get started with CAD to improve your drawing efficiency, but also can make it appear more professional in the eyes of customers. Overnight, it will be more and more helpful for you in CAD drawing.

F1: Get help.

f2: Complete the switch between the drawing window and the text window.

f3: Controls whether the object can be snapped automatically.

F4: Digitizer control.

F5: Isometric plane switching.

f6: Controls how coordinates are displayed on the status line.

f7: Grid Appearance Control.

f8: Orthogonal form control.

f9: Grid snap form control.

F10: Polar axis form control.

f11: Object tracking form control.

How to calculate the area of the top latex paint on the wall. Generally speaking, to calculate the interior wall plastering area, you need to subtract the door and window area and the hollow area, but the skirt line, mirror suspension line, 0square meters of holes, as well as where walls and parts are connected.

This area must be counted. However, the size of the sides of the openings and the top plastering area of the ceiling will not increase, and the wall area and the inside of the chimney close to the wall will need to be added to the overall interior wall plastering volume. The rules for calculating the interior wall plastering area are:

The length of the construction of the interior wall should be hollow orange, that is, the interior wall surface should not be left, and the height depends on the distance from the ground to the top. Ceiling.

How to calculate the area of the top latex paint on the wall.

1.The yin and yang angles of interior space can be divided into square and straight. When installing the substrate, many users find that there is a problem with the yin and yang corners of the interior columns, which can affect the overall aesthetics.

At this point, you can only redo the plaster, which will consume your time. Therefore, when plastering interior walls, it is necessary to make a certain number of angle iron tools to ensure that the indoor yin and yang angles are straight and the dimensions are used to detect the yin and yang angles.

2.In interior wall plastering construction, indoor discovery is also important, because many construction workers will forget about this process, which can easily cause construction trouble in the mud stage. If the main body is very different, it is difficult to carry out the installation of tiles and ceilings, and dimensional deviations can occur, leading to differences in the overall decoration.

3.In many indoor projects, when installing aluminum alloy windows, the clearance on three sides will be different, and the size deviation is large. The reason for this phenomenon is that the interior wall plastering is not well constructed.

During the construction process, attention should be paid to the vertical direction of the plastering direction, and more attention should be paid to the position of the windows.

4.When plastering interior walls, place the scraper and ruler in a position where there are no baseboards and ceiling heights, so that the position of the two will be uneven. When installing the baseboards, they should be kept in an upward alignment.

Ceiling installation also requires ensuring the verticality of the keel. If there is a gap between the keel and the Wumeng wall, when the interior wall is applied, it must be double-checked to reduce problems after completion.

5.In the structure of the door opening, it is necessary to explain the width of the door opening with the construction personnel to avoid the size of each door opening after the construction is completed. When the inner wall is applied, it can also be detected accordingly, such as position, verticality, etc.

That's all about:How to calculate the area of the top latex paint on the wall. Description of the problem, I hope it helps you!

You can get it for free

Summary. For polygons, rectangles, circles and other graphics, you can click "Tools" on the menu bar, select "Query" in the drop-down menu, and then select the area on the extended menu, and then enter the letter "O" to select the object, you can get the area and perimeter of the selected graphic, if it is a closed graphic composed of multiple lines, you can turn them into a region and then query the area, and finally add several areas on the line.

CAD architectural drawings are available, how to calculate the area of exterior wall paint.

For polygons, rectangles, circles and other graphics, you can click "Tools" on the menu bar, select "Query" in the drop-down menu, and then select the area on the extended menu, and then enter the letter "O" to select the object, you can get the area and perimeter of the selected graphic, if it is a closed graphic composed of multiple lines, you can turn them into a region and then query the area, and finally add several areas on the line.

There are drawings on how to collect the square area of exterior wall paint.

You can click "Tools" on the menu bar, select "Query" in the drop-down menu, then select the area on the extended menu, and then enter the letter "O" to select the object, you can get the area and perimeter of the selected graph, if it is a closed graph composed of multiple lines, you can turn them into areas and then query the area, and finally add several areas to the line.

How to calculate the decoration budget for wall and top latex paintAbout calculating the use of wall paints.

First, we must first calculate the size of the area to be drawn. There are two main methods:

Method 1: Calculate based on the total area of the room.

Total paint area = four-sided paint area Ceiling paint area.

Four-sided wall painting area = area.

Ceiling paint area = floor area.

Therefore, the total coating area of the paint (including the ceiling) = area Note: it will increase or decrease due to the height of the roof and the number of windows and doors).

How to calculate the decoration budget for wall and top latex paint

Method 2: This is more accurate based on the data calculation of the room type.

Painting area = upper surface (length * width) wall surface [(length and width) * height * 2 times] - door and window area.

Simplify: (Length, Width, Perimeter, Height - Door and Window Area).

Because the area of the upper surface is long*wide, and the walls are round, it is correct to open the circle.

Use paint. Different brands of different series have different malleability and different brushable areas. The brush area for each series will be displayed on the bucket. Everyone can keep an eye out for it when buying.

How to calculate the decoration budget for wall and top latex paint

The following data is for estimates only:

Number of paint buckets, total paint area (once), brush area (twice).

1 barrel 5l 50-60 square meters 25-30 square meters.

2 barrels 10L 100-110 square meters 50-60 square meters.

3 barrels 15L 150-160 square meters 75-90 square meters.

4 barrels 20L 200-210 square meters 100-110 square meters.

5 barrels 25L 250-260 square meters 125-140 square meters.

6 barrels 30L 300-310 square meters 150-160 square meters.

Note: The actual paint area will vary depending on the construction method and surface roughness. Recommended.

1. First of all, enter L on the command line and select the line command to enclose the graphic area that needs to be measured.

2. Enter bo on the command line, that is, the boundary command. Click [Select Area] to select the area to be measured, so that the selected graphic area of the field cavity becomes an overall area.

3. Enter li on the command line, that is, the command list. Select the overall area formed by the previous step to get its area and perimeter.

4. Finally, enter e on the command line, select the erase command, the field and line will be deleted, and the floor plan will be restored.