-
In automobile manufacturing and maintenance, the shape of many sheet metal structural parts is very complex, in order to avoid the difficulty of the plate, the sheet metal material must have good process performance requirements, namely:
1 The sheet metal material must have good plasticity. It is necessary to have the ability to produce permanent deformation without being destroyed under the action of external forces. For cold work parts, it is necessary to have good cold plasticity, such as stamping parts of automobile parts; For hot work parts, it is necessary to have good thermoplasticity, such as hot forgings, spring steel plates, hot rivets, etc.
2 Good solderability. Many automotive sheet metal parts are welded together by spot welding, oxygen welding, arc welding or gas shielded welding, so sheet metal parts are required to have good welding performance. This is especially important in the repair of automobiles, where materials with good weldability have high welding strength and low cracking tendency.
3 **Low cost, economical and practical. For any component of the car, economy should be taken into account if the working conditions are met. If ferrous metals can be used, non-ferrous metals are not used; Non-ferrous metals can be used, but precious metals are never used.
The life of automobile sheet metal components should be compatible with the life of other components of the car.
4. Good chemical stability. Most of the car coverings work in the open air, often in contact with water and steam, especially mufflers, often under higher temperatures and corrosive gases. This requires that sheet metal parts must have good chemical stability, which not only requires corrosion resistance and strong rust resistance at room temperature, but also requires that they are not corroded and deformed under high temperature or sun exposure.
-
In terms of sheet metal, he introduced the full knowledge of automobile body repair, motor vehicle body structure, common equipment, sheet metal tools and measuring tools, body maintenance equipment and basic operations, welding and bonding of body repair, sheet metal manual forming process, shaping and correction of sheet metal parts, body collision damage diagnosis, evaluation and development of body repair process plan, etc.; In terms of painting, the basic knowledge of body painting, the use of common spraying equipment and tools, etc., are introduced. The target audience of this book is young people who love automobile maintenance and aspire to be self-taught with a junior high school education level or above, and can also be used as a reference book for automobile application and maintenance students in vocational and technical colleges, and is also suitable as a reference book for automobile maintenance technicians.
-
If graduates learn automobile sheet metal, it should be relatively easy to learn fast technology, as long as their hands-on ability is strong, it is very simple to learn.
-
After graduating from junior high school, you can go to study auto sheet metal work. This is a sheet metal job requirement, you have to be patient, careful, and skillful. The cultural requirements are not high.
-
I think you have a very good choice and have a certain vision, because now the number of cars is very large, whether it is a public car or a private car, when he has problems, if you master this sheet metal technology, then you will be very popular, it is worth learning this technology.
-
If you really don't want to study, learning a craft is a good choice.
-
If junior high school students want to learn automobile sheet metal, they should also do some understanding of this knowledge, so they can start faster in the learning process.
-
If a junior high school student goes to learn automobile sheet metal technology, there is no requirement, as long as the body is healthy and the mind is clear, you can learn, first go to a professional institution to learn.
-
If you want to learn car sheet metal, then it must be dirty, tiring, hard-working, and resilient.
-
Find a school system to study, after all, you are still young, school learning should be more comprehensive, and you can also improve your academic qualifications.
-
Hello, there are no special conditions for this, admission is generally after the year and when the school starts in September, you can consult online or go to the local auto repair school for a field trip.
-
If you simply learn the skill of auto sheet metal, it will take about a week or two to master the tricks of this technology, and you can assist time, but if you want to do car repair, it may not be enough to master this technology.
-
Junior high school students. If you choose automotive sheet metal. It takes about 12 months to study. Because it also takes time to learn automotive sheet metal. It takes about 12 months to learn automotive sheet metal.
-
If junior high school students choose to study automobile sheet metal, it will take about a year to study according to your personal receptivity.
-
Automobile sheet metal is a short-term major, generally learning for about two or three months, belongs to the auto repair industry boutique professional, automobile sheet metal is a processing method of automobile maintenance, so the learning time is not very long.
-
When I was a junior high school student learning auto sheet metal, I generally had to study for at least one year, so that you could have better learning capital to do it.
-
If you are not admitted to high school after graduating from junior high school, if you want to learn vocational technology, you can choose automotive sheet metal, and generally speaking, if you want to study well, you can do it in 2 to 3 years.
-
It takes about half a year. It is a technical means of automobile repair, which is equivalent to automobile sheet metal repair, which refers to the repair of the car body after the collision, that is, all the rest of the work except for the anti-corrosion and decorative spraying work on the body.
-
There is no difficulty in the profession, and there is no good or bad major.
It's only if you want to learn or not, if you are diligent and inquisitive, I think it won't be too difficult for you. On the other hand, if you fish for three days and dry nets for two days, you will find it difficult to learn even if you are talented. This kind of example is a lot in both modern and ancient China.
-
The classification is very fine, and you can learn it selectively.
1: The automobile repair industry can be basically divided into mechanical repairers, electrical repairers, sheet metal repairers, painting repairers, and other accessories, beauty, and special repair industries are not included.
The division of the car body means to remove the whole car circuit computer system, remove the whole car engine drive, brake steering system, and remove the car paint. Then all that remains is the body of the car.
2: The body assembly (this is a generic accessory name) includes: body sheet metal parts (metal parts) car glass, the whole car lamps, the whole car, exterior decoration parts and handles, seats and accessories, lock mechanism, window sealing and lifting mechanism, door and front and rear sail cover connection mechanism, the sum.
In other words, when your car has problems such as broken glass, door lock failure, damaged trim, etc., remember that you need to find the car sheet metal and not other types of work!
Since the car is a high-precision whole. And electrical accessories and mechanical accessories should be attached to the corresponding position of the car body with high precision and low error. Even the straightness and curviness of the paint (which greatly affects the appearance of the body) are highly dependent on the error value of the body sheet metal, so the sheet metal body and repair have become a pure manual work that has no hard standards, no automatic tools, and cannot be intuitively taught in the automotive industry.
In short, car sheet metal is the complete repair of a faulty and damaged car body!
The classification is very fine, and you can learn it selectively.
-
How long does it take for junior high school students to choose to study auto sheet metal? Generally speaking, you need to study auto sheet metal for at least one year.
-
If my junior high school students choose to learn auto sheet metal, it will take us three months to become proficient.
-
How do junior high school students choose how long to study auto repair sheet metal? If junior high school students want to learn auto repair and auto sheet metal, they have to go to an auto repair shop or a four-S shop. It takes about a year or so to study.
-
If you want to study hard, if you study hard, every day in addition to eating is to study, generally speaking, you can learn in about a month, if you don't use WeChat, think about playing all day long, go to friends to play with mobile phones, may not be able to learn in a year...
-
If junior high school graduates want to choose the environment to learn auto repair, they have to study for about three years before they can mature and be capable.
-
If junior high school students choose to learn automobile sheet metal, the study is divided into two stages: theory and practice, the theory is a few months, and the practice time will be longer!
-
If a student chooses to study automotive sheet metal, how long will it take? It also depends on a person's degree of effort and his understanding, some people may be very interested in car repair sheet metal, and they may learn faster.
-
Junior high school student, didn't you choose how long to study auto sheet metal? Hello, this depends on your own ability, your attitude towards learning, and you are afraid of the master.
-
If you want to learn auto repair for junior high school students, I think it is best to learn car maintenance and beauty, which is actually very simple and easy to learn.
-
As long as you want to learn, there is nothing you can't learn.
One, know where you are lacking. Try to make up for the lack of the series.
Second, ask the master for advice. "Threesomes must have my teacher" is especially suitable for apprentices.
Third, learn more, take more notes, combine professional knowledge with on-site problems, and deal with problems with evidence.
Fourth, do more, equipment maintenance often starts with damaging the equipment.
Fifth, don't be afraid to make mistakes, every mistake is progress. But you can't make low-level mistakes and the same mistakes. It is necessary to make every mistake carefully and seriously.
Sixth, open the door to do business, pay attention to benevolence and harmony. Learn more about communication with people and customers. "Hundred family rice" is not so easy to eat.
So, work hard. No matter what industry you are in, you must be down-to-earth, give yourself a dream, take this dream as the original dream, and strive for it for life. Always "do not forget the original intention". I believe you can do better, come on boy.
-
Automobile sheet metal:
1. Automobile sheet metal is a technical means of automobile repair, in this regard, automobile sheet metal is equal to automobile sheet metal repair, which refers to the repair of the car body after the collision, that is, all the rest of the work except for the anti-corrosion and decoration of the body.
Such as the analysis of automobile body damage, the measurement of automobile body, the shaping of automobile body sheet metal, tensile correction, stress relief welding, and the assembly and adjustment of automobile body accessories.
2. Automobile sheet metal is a processing method for automobile maintenance, also known as cold work, to say that if the appearance of the body is damaged and deformed, the process of sheet metal is needed. Automobile collision repair has developed from the original "smashing, pulling and welding repair" to the secondary manufacturing assembly of the body.
3. The repair of the collision accident vehicle is no longer a simple knocking on the sheet metal of the car, and the quality of the repair cannot be observed by the naked eye alone. Maintenance personnel should not only understand the technical parameters and dimensions of the body, but also master the characteristics of the body materials, the transmission of the characteristics of the force, the deformation trend and stress points of the body, and the production process of the body, such as welding process.
4. Sheet metal is a type of work in auto repair, mainly for the appearance of the body, the replacement, repair, orthopedics, and paint of the external car body (such as bumpers, doors) also belong to the sheet metal work area, and there is a specific division of labor within the sheet metal, and the sheet metal in the broad sense is fully covered.
5. The sheet metal in the narrow sense is only to replace the outer car body, as well as the use of welding, upper frame orthopedics and other general repair of the car shape work, and the sheet metal in the broad sense is putty, grinding, and painting, as well as polishing, in the internal division of labor. . .
-
The sheet metal technology of Ere Auto seems simple, but it is actually a technical job, and the real top sheet metal master also needs to be honed for a long time, so if you only have the basic level of junior high school students, it may take 2 or 3 years to learn sheet metal repair.
-
You can go to learn to find a better repair shop As long as the master is willing to teach, work hard yourself In about two years, you will almost open a small shop by yourself Only sheet metal paint If you open a store for the first time, plus the store fee, it will be about 30,000 or 40,000 yuan.
-
If you want to learn the basic level of junior high school, and if you want to learn the basic level of automobile plate, and you want to learn the technology of automobile sheet metal repair, can you do it? I think of course I can learn, I think I can learn car sheet metal repair I think I can of course learn, I think I can learn car sheet metal repair technology. I think junior high school graduates can learn this technology, and I think that junior high school graduates can learn this technology.
-
Hello, no problem. note w。It can be learned. In this case, the main thing is to have strong hands-on ability.
-
If you have the basic level of junior high school students, can you learn the technology of automobile sheet metal repair? I think of course you can learn. I think it is very promising that you can learn the technology of automobile sheet metal repair.
-
If you have a junior high school student's technical level, can you learn the technology of automobile sheet metal repair? I think that if you have the technical level of junior high school students, you must be able to learn the art of automobile sheet metal repair, as long as you want to learn well, you will definitely learn well.
-
Is it feasible to have a junior high school basic learning level to learn automobile sheet metal repair technology? Tell you that automotive sheet metal technology does not need to be too highly educated, as long as you are hard-working and persevering.
-
Hello, junior high school students can learn the technology of automobile sheet metal repair, it is recommended that you find a professional auto repair school to study, there are many practical classes, listen carefully in class, and it is easier to learn more hands-on exercises.
-
1.Car detailing can be divided into three types: general beauty, car repair beauty, and professional car beauty. 1.
General beautyGeneral beauty is what people often call car washing and waxing operations, that is, the operation of carrying buckets on the side of the road, wiping cars with towels, and waxing. Non-professional beauty products such as laundry detergent and dish soap are often used in general beauty. The pH of these products is generally high, but the resistance of automotive paints to acids and alkalis is below the pH value.
2.Automobile repair and beautyCar repair and beauty refers to the restorative beauty operation carried out after the surface of the body paint or inner chamber parts has some defects, and the defects mainly include paint film sickness, paint scratches, spots and surface damage of the inner chamber parts, etc., according to the scope and degree of defects, surface treatment, local repair, vehicle refurbishment and interior parts repair and replacement and other beauty operations.
3.Professional car beauty professional car beauty not only includes the cleaning and waxing of the car, but also the maintenance according to the actual needs of the car, including the correct selection and use of car care products, the care of car paint film (for example, the treatment of various paint film defects, the repair and beauty of scratches, etc.), car decoration, boutique options, etc., is a very complex system engineering.
4.Surface care.
Waterless car washing, foam delicate car washing, automatic computer car washing, chassis cleaning, paint stain treatment, paint flying paint treatment, new car waxing, oxide layer removal, paint sealing wax, paint scratch treatment, polishing and refurbishment, metal parts brightening, tire brightening and anti-slip, glass polishing, wheel cleaning treatment, exterior trim cleaning, engine exterior beauty, scratch quick repair, asphalt of automobile paint surface, tar go, roof decontamination and refurbishment treatment, automotive glass rain and fog prevention treatment.
Find a learning method that suits you and learn positively.
1.After graduation, students can go to large telecommunication service providers and large communication equipment manufacturing enterprises at home and abroad for technology development, and can also go to other enterprises and institutions to engage in design, maintenance, education and training in the field of network engineering. >>>More
Automobiles have developed to electronics, and technological progress has made the current car have very few pure mechanical failures, and it is estimated that they will starve themselves to death if they can disassemble and replace parts. There are many circuit and electronic control failures, and this foundation has been laid, and the future is very popular. Sheet metal painting to when the demand is large, as long as you live to do the beautiful size of the repair shop can have a place, piggyback to learn some plastic parts shaping, more cars are inevitably bumped, plastic parts are cheaper, you let the owner of the whole change is also distressed, capable plastic repair of course. >>>More
The habit of pre-class preview and post-class review. Junior high school students need to envy the empty song, and the content that needs to be learned that day will be prepared in advance, and they need to do more exercises after class to consolidate their knowledge points.
It is also a good choice for junior high school students to go to technical school, where they can learn technology and make up for the gap in their academic qualifications and improve their academic diplomas. After graduation, it is also a package distribution, with a high employment salary and a good environment. As far as the current market is concerned, the automobile market is a relatively popular profession with a high employment rate. >>>More