Geely Vision 2017 automatic transmission Xinfu version why it is difficult to climb

First of all, you get what you pay for, after all, this is a low-end model, and the displacement is not very large, so the climb is relatively difficult, which is very normal, you can't be very good when running.

It's a small displacement, what's strange about the hard climbing, it depends on how big the slope is, how many people you carry, and whether you turn on the air conditioner.

Hello, it is limited by the displacement, so when climbing, the power may be slightly insufficient.

Hello, after all, this model is a small displacement engine, and it may be more difficult to climb slopes with automatic transmission.

There are many reasons for the difficulty of climbing, the first is full load, and the second is that the power itself is weak, as long as it is enough.

The power of this car is average. If the slope is larger, if it is fully loaded, it is still more difficult, and the general household can still be satisfied.

In the case of this auspicious vision, the self-priming power is very good, and it can fully meet the needs of the household.

The power of this car is average, and it will definitely be difficult to climb hills, and the general home transportation is quite suitable.

Hello, what specific displacement engine are you or yes, if the normal itself power is average.

Hello, this depends on what kind of slope, how much slope there is, and then how much load, etc., will affect the power.

In fact, if you use it at home, you can still use it, it belongs to a self-priming engine, and the power is good.

Hello, this is the reason for the weak engine power.

Geely Vision X6, what is the reason why the 2018 throttle car can't run fast.

Hello, master, Hu trembling shirt vehicle can not speed up and jog up this fault performance, it is recommended to check the following aspects of the fault of the original trouser cavity causes: first, the vehicle engine carbon deposition caused by the jitter or speed up weakness, in this case, it is recommended to clean the throttle and air intake carbon deposits, and then check the carbon deposits in the cylinder, whether the valve base carbon deposits are serious. Second, the engine ignition system failure, this failure is generally caused by the ignition coil, or the aging of the spark plug, corresponding to the replacement of the damaged ignition coil, or the replacement of the spark plug.

Third, if the engine fuel system fails, the oil circuit is too dirty, or the fuel quality is too poor, it is recommended to clean the oil circuit, and then add some high-grade gasoline, or fuel treasure. In the last case, it is considered that the hole foundation caused by the problem of the vehicle gearbox, the wear of the friction plate inside the gearbox, or the damage of the solenoid valve body, the upshift is not timely or the acceleration is weak. The gearbox needs to be checked.

The reasons for the poor uphill dynamics may be:

1. Oil, the circuit is faulty. The oil circuit is not smooth, the air intake is blocked, and the gas is mixed and the gas is too thin or too thick; The ignition time is too late or the contact gap is too small or too large; engine exhaust pipe leakage; Leakage or detachment of high-voltage distribution lines, leakage or channeling of distributor jacks; uneven wear of distributor cam or excessive carbon deposit in spark plug, crack leakage;

2. Insufficient cylinder pressure; The cylinder gasket is not sealed, ablative; Valve seat inserts are ablative, unsealed or detached; The valve springs are too soft and work poorly; piston rings bite or match; The piston cylinder clearance is too large;

3. The gas distribution phase is abnormal;

4. A few cylinders do not work;