-
The juicer is used to open the lid and put in the cleaned fruits and vegetables, and turn on the switch.
Wash the fruit or vegetables that need to be juiced, remove the pits, peels and spoiled parts, and cut them into pieces of appropriate size. Disassemble the juicer, wash the parts of the juicer, and install the juicer's filter and juice box. Place the prepared pieces of fruit or vegetables into the juicer's inlet.
Press the start button of the juicer to start juicing. The juicer squeezes the fruit or vegetable cubes into juice, which flows into the juice box, while the pomace is filtered out through a strainer and the juice flows out of the juice outlet. Use a cup or other container to catch the juice coming out of the spout.
Take out the strainer, juice box and other parts of the juicer and clean them. Be careful not to allow water to flow into the motor to avoid damaging the juicer.
It should be noted that when using the juicer, it is necessary to follow the instruction manual of the juicer to avoid accidents caused by improper operation. At the same time, when choosing fruits or vegetables, you should choose fresh, ripe and pollution-free ingredients to ensure that the juice is healthy and delicious.
Precautions for using a juicer
1. Cleaning: The juicer needs to be cleaned and disinfected before and after use. During use, it is necessary to pay attention to cleaning fruits and vegetables to avoid the impact of residual pesticides and bacteria on the juicer.
2. Cutting: Fruits and vegetables need to be cut into small pieces to facilitate the extraction of the juicer. At the same time, care needs to be taken not to put oversized fruits and vegetables into the juicer to avoid damage to the machine.
3. Order of use: Generally, soft fruits and vegetables are put first, then hard fruits and vegetables, and finally leafy vegetables. This allows the fruits and vegetables to be better squeezed by the juicer, avoiding clogging and waste.
5. Storage: After use, the juicer needs to be cleaned and stored in time to avoid the impact of dust and bacteria on the machine.
-
These are all issues of great concern to us, rightly so'The use of a juicer can not only save energy and safety, but also extend the service life of the juicer and reduce the occurrence of problems, so that life will be less troublesome, so, how to use the juicer? The following will introduce you to the use of the juicer.
The correct way to use the juicer:
1. The position of the juicer should not be tilted, and it should be placed firmly without loosening, and it is best to change the place if the position is not good.
2. Before use, check whether the props and filters of the juicer are installed firmly, and then install the cup firmly and confirm it.
3. Before juicing food or fruit, it should be cut into pieces that are suitable for the size of the juicer's inlet and then put into the juicer.
4. Plug in the power supply before juicing and ensure that it is connected.
5. Start the machine and confirm that the motor is running normally.
6. Push the food into the cup, keep it moving at a constant speed, and avoid too fast and too violent movements to avoid danger.
7. After the food is processed, unplug the power first, and then pour out the processed food.
8. Carefully clean the internal and external components of the juicer, but avoid water flow into the motor.
9. Place the juicer in a ventilated place where direct sunlight does not reach and dry completely.
Precautions for the use of the juicer:
When using the juicer, be sure to operate in strict accordance with the rules of use of the juicer, do not use the included items to push the food into the machine during use, such as small sticks, do not use fingers, and do not open the lid during the rotation of the machine's motor.
-
The juicer is a small electrical appliance that mainly uses a motor to drive the blade to rotate at high speed to crush fruits and vegetables to squeeze out delicious food'Fruit juice. So how to use the juicer, let's find out together!
How to use the juicing pie bumper machine
1. Put the rack in the juicer vertically towards the main engine, then align the bottom of the net with the motor wheel and press it, then load it into the top cover, buckle the safety buckle, open it and try it, if the dust can run normally and the noise is not large, you can start squeezing juice.
2. Before squeezing the juice, clean the fruit, peel and remove the core, then cut it into small pieces and put it on a plate.
3. Clean the cup and put it at the juice outlet, then put the slag hopper at the slag outlet, then put the fruit into the juicer, press the start button, and start juicing.
4. After juicing, unplug the power plug, pour out all the pomace, and then start cleaning after cooling.
How to clean the juicer
1. Mango, apples and other fruits are rich in fiber, which is difficult to clean after squeezing with a juicer, especially the cutter head, there will be a lot of pulp, if you do not slowly pull out the pulp, directly use the steel wool ball brush, it is easy to damage the cutter head, so you should be patient and clean the cutter head carefully.
2. If you buy a multi-functional juicer, in addition to juicing, it can also be used for grinding meat, but it is more difficult to clean after grinding, and you need to master the skills.
3. Use a juicer to squeeze peppercorns to make sauces, and after squeezing, the powder remaining in the cutter head must be cleaned, otherwise it will corrode the cutter head.
4. After using the juicer every time, it should be scalded with boiling water to avoid bacteria and affect the health of your family and the next use.
-
Many people have a juicer at home, and the juice can be given to children and the elderly, which is convenient for them to supplement the vitamins they need without chewing the fruit, so how to use the juicer? Let me take you to find out.
1. Put the juicer on the platform and check whether the platform is firm and whether there is any inclination.
2.Check that the props of the juicer and the filter are securely installed.
3. Cut the vegetables or fruits that need to be juiced into small pieces and pour them into the juicer.
4. Plug in the power supply, click "Starter", click "Juice".
5., wait for the indicator light to sound, unplug the power supply, and pour out the fruit pomace.
6.Pour the juice into a container and check whether there is any water flowing into the internal components of the juicer.
The above is the method of using the juicer that I share with you, and those who need it can learn about it.
To make vegetable juice with a juicer, wash the vegetables and cut them into small pieces, put them in a juicer and stir them, and season them with sugar or honey when drinking. You can do this by following these steps: >>>More
It's not just a two-in-one, it's multi-functional.
1.Can be stirred. >>>More
Bake in the oven for 30 minutes to confirm that the machine is normal. >>>More
It is to make an appointment to do laundry.
When you go out, you can use the appointment function, that is, when you go out at noon, set the appointment time to 5 o'clock in the afternoon, and the washing machine will automatically start washing clothes at 5 o'clock, and when you come back, the clothes will be washed, and you can dry the clothes directly. >>>More
Bubble machine for weddings, blowing bubble water can be made in the following ways: >>>More