What is the quality of the 4G63S4T engine?

What is the quality of the 4G63S4T engine, there are the following 8 points:

The performance of the G63S4T engine is average, but the quality is still very reliable.

Mitsubishi's 4G63 engine is the heaviest cast iron model in the world, and Chery, Haima, Great Wall, BYD, etc., have used this engine in the past.

Mitsubishi technicians felt that the high-revving engine's power take-off range was too narrow, which placed higher technical demands on the driver, and that the design was not suitable for rally racing.

However, the long stroke design helps to achieve a large torque output in the medium and low rev range, and the engine durability is relatively higher due to the low rev speed, which also makes Mitsubishi's rally cars less prone to mechanical failures in races.

The 4G63S4T engine is produced by Shenyang Aerospace Mitsubishi Company, and after the 4G63 is equipped with a turbo to become a 4G63S4T, it not only bursts out of 140kW of power, but also has a proven cylinder block.

With the help of Mitsubishi's advanced engine technology, the performance of the 4G63S4T engine in terms of power performance and fuel economy is very good. But today, the once excellent performance may be outdated, but it is better to be mature and reliable.

In actual driving, because the engine speed needs to reach more than 2400rpm to achieve peak torque, when the engine speed is below 2000rpm, the first reaction when stepping on the accelerator is that the speed increase is slow, and the power is somewhat unable to keep up.

To a certain extent, this performance affected the start on the spot and the acceleration afterwards. The solution is also very simple, press the throttle deeply, and increase the speed to more than 2500rpm.

Mitsubishi's 4G63 series is a very mature product, and many models have it, such as BYD F3, Ling Shuai, etc. This engine has low fuel consumption and simple maintenance, but now it seems that the power and torque of this engine are low.

The s4T engine is very good, and the quality is also very good, this kind of car is a new concept car, it is a concept car that has just been launched, a concept car engine of the first elephant in 2019, so the quality of the world's top brand engine.

Four-cylinder EFI engine. The Redhead 4G63 was originally installed on Mitsubishi's Galant VR4 model, and its civilian version of the SOHC was changed to a DOHC double overhead camshaft design. The engines also have different air intakes, with the civilian version being naturally aspirated and the EVO version offering a turbocharger.

The upgrades to peripherals and components that come with these two improvements are also very different, including the engine management system, cooling system, ignition system, etc.

Precautions for engine use.

It should be noted that after the engine is running at full load, the engine must be idle for 3 to 5 minutes before it can be stopped. This is to allow the pistons, cylinders, bearings, and turbocharger components to be sufficiently cooled.

The whole vehicle with urea aftertreatment system can only be turned off after the main power switch stays for at least 30 seconds after the engine is stopped, and the engine shall not be washed with water, and the electronic control module (ECM) plug or touch the metal contact pin of the plug without permission.

The above content refers to Encyclopedia - EFI Engine.

1.Models equipped with 4G63 engines include Haval H5, Mitsubishi EVO, Pajero, Dongfeng Fengxing Lingzhi, Changfeng Cheetah and other riders.

2.Take the 2018 Haval H5 classic manual four-wheel drive aggressive as an example. Its body length, width and height are 4645mm, 1800mm and 1775mm respectively, and the wheelbase is 2700mm.

Its body structure is a five-door five-seat SUV, with a fuel tank volume of 70L and a curb weight of 1860kg.

3.In terms of power, the 2018 Haval H5 Classic Manual Four-wheel Drive Aggressive is equipped with an inline four-cylinder turbocharged engine with a maximum power of 110kW and a maximum torque of 320Nm. It is mated to a 6-speed manual gearbox with front-mounted all-wheel drive.

Produced by Shenyang Aerospace Mitsubishi. The engine is the core component of the car, so the choice of engine cannot be ignored when buying a car. The 4G63S4T engine is the heaviest cast iron model in the world.

Chery, Haima, Great Wall, BYD, etc. This kind of engine was used back then, and the requirements for the driver were relatively high. The highlight of this engine is that it can achieve more torque output in the low and medium speed range.

And due to the low speed, the durability of the engine is relatively high, and the number of engines is reduced.

The turbine is equipped with a tried-and-tested cylinder block with 140kW of power. Coupled with the advanced technology of Mitsubishi engine, it has better performance in power performance and fuel economy, and has become one of the engine models that many car owners value when buying a car.

The 4G63S4T engine has a power of 190 hp (140 kW) at 5500 rpm and a peak torque of 250 Nm at 2400-4400 rpm. In actual driving, peak torque can only be achieved if the engine speed is higher than 2400 rpm. When the engine speed is below 2000 rpm, the reaction of stepping on the throttle is that the speed increases slowly and the power cannot keep up, which is also the disadvantage of this engine.

Summary. Hello, the performance of the Mitsubishi 4G63 engine is average, but the quality is still very reliable:1.

Mitsubishi's 4G63 engine is the heaviest cast iron model in the world and has been used by Chery, Haima, Great Wall, BYD, etc. 2.**The Mitsubishi 4G63 has made some changes on the basis of the old model, and the overall appearance has not changed much.

The shark fin antenna is also a small highlight; 3.The old safety performance configuration is adopted, and the external safety element with high rising rigidity is particularly excellent; 4.The Mitsubishi 4G63 chassis should be its biggest highlight.

The front MacPherson independent suspension and the rear four-link independent suspension are also comfortable to drive.

How much is the Mitsubishi 4G63T engine.

Dear, hello, Mitsubishi 4G63T engine costs about 8500 yuan.

Hello, the performance of the Mitsubishi 4G63 engine is average, but the quality is still very reliable:1. Mitsubishi's 4G63 engine is the heaviest cast iron model in the world and has been used by Chery, Haima, Great Wall, BYD, etc.

2.**The Mitsubishi 4G63 has made some changes on the basis of the old model, and the overall appearance has not changed much. The shark fin antenna is also a small highlight; 3.

The old safety performance configuration is adopted, and the external safety element with high rising rigidity is particularly excellent; 4.The Mitsubishi 4G63 chassis should be its biggest highlight. The front MacPherson independent suspension and the rear four-link independent suspension are also comfortable to drive.

Produced by Shenyang Aerospace Mitsubishi. The car engine is the core component of the car, so we can't ignore the choice of engine when buying a car. The 4G63S4T engine is the heaviest cast iron model in the world.

Chery, Haima, Great Wall, BYD, etc. This engine was used back then, and it was more demanding for the driver. This engine.

Produced by Shenyang Aerospace Mitsubishi. The car engine is the core component of the car, so we can't ignore the choice of engine when buying a car. The 4G63S4T engine is the heaviest cast iron model in the world.

Chery, Haima, Great Wall, BYD, etc. This engine was used back then, and it was more demanding for the driver. The highlight of this engine is that it can achieve more torque output in the low and medium speed range, and because the revs are not high, the engine is relatively more durable, reducing the number of engines.

The 4G63S4T engine has a power of 190 hp (140 kW) at 5,500 rpm and a peak torque of 250 Nm at 2,400-4,400 rpm. In real driving, peak torque can only be achieved at engine speeds above 2400 rpm. When the engine speed is below 2000 rpm, the response to pressing the throttle is that the rev increases slowly and the power cannot keep up, which is also the disadvantage of this engine.

Where is the 4C20A engine made?

It is a four-cylinder 16-valve engine with advanced technologies such as turbocharged in-cylinder direct injection technology, intake and exhaust side VVT, sodium-filled valves, and high-performance piston connecting rods.

The 4C20A engine has a maximum power of 172kW and a maximum torque of 360 Nm. The maximum torque output is from 2200 to 4000 rpm and the torque platform is 1800 rpm. The turbine control valve of the 4C20A uses a vacuum valve, which uses the vacuum level on the inlet side to open the turbine control valve.

Compared with the electronically controlled turbine safety valve, the control accuracy of the vacuum valve is not enough, and the response is not as fast as the electronically controlled turbine safety valve.

The 4C20A is a turbocharged engine, and the power level is quite satisfactory, but compared with the engines of major joint venture brands, the power parameters are still a notch lower. And this engine is a little lacking in power at the beginning, and the fuel consumption performance is not ideal. It can be said that this engine is still relatively expensive to drive on pure city roads.

This engine is installed on Great Wall Motor's WeyVV7 and Haval's H7. There are some minor flaws in the matching of the engine and gearbox of these two cars, and the match is not very good. And this engine has a bit of a horse-drawn feel on these two cars, and the power level is just right.

This engine also features the technology of a timed mute chain and a balancer shaft on both sides. The engine runs smoothly when starting, and the sound of the engine is barely audible in the car. This engine greatly increases the comfort of the vehicle.

4G63S4T Engine Parameters What is the 4C20A engine made @2019