What kind of configuration is required to run CAD, click on the details

If it is a version below 09, basically the computers on the market can run smoothly, but like the 10--12 version of the perfect 3D rendering effect, the configuration required is slightly higher, and it is no problem to have a separate display. In fact, CAD does not have high requirements for the configuration of the machine, the image point, the computer that can run the win7 system can be!

If it's AutoCAD, the configuration won't be too high, and now the host of more than 2000 yuan is fully competent.

I have 4400+ 2G memory in 07, and running 2008 is quite smooth, but installing 2011 or 2010, there is a sticky feeling when it runs.

If you use a domestic ZWCAD, any version can run smoothly.

Processor: AMD Athlon-II X3 445 520 (Original Licensed) Motherboard MSI 870-C43 470 510Element.

Graphics card Dilan Hengjin HD5670 Extreme 2nd Generation 512M 490-530 Preferred.

HDD Western Digital WD5000AAKX 500G SATA3 16M (Blue Disk Box).

Power supply FSP Blue Ocean.

Now most computers can run

The software is generally indicated.,It's OK to use professionally designed configurations.,Memory high.,I can't tell you the specifics.,Or find a professional computer to assemble and ask.。

16G RAMSolid state drivesi5 or R5 or higher CPU.

However, if it is a large drawing, complex graphics, or other software that eats configurations such as 3dmax, the configuration of ordinary notebooks cannot be satisfied, and a higher-configuration computer is required. In addition, it is also necessary to pay attention to issues such as heat dissipation, standard voltage, low-voltage U, solid-state drive, and expansion interface.

Introduction

CPU and memory are the most important configurations of CAD drawing, and the role of CPU is to maintain the smoothness of drawing, engineering calculation, and graphics rendering. The better the CPU, the smoother the drawing operation and the faster the calculation speed.

Many friends bought a new laptop to draw CAD is very not smooth, according to the online method tried a lot but not solved, the reason is that the CPU did not buy right, such as bought i7 8550U, on the surface it is a better CPU, the main frequency.

Yes, turbo. Be. In fact, it is a low-voltage U, generally with a U suffix, below the main frequency, below the core 4 cores, and below the power of 15W, all of which are low-voltage U, and the operation of the diagram is very unsmooth. You need to buy a standard pressure U to meet the needs of CAD drawing.

The laptops that CAD needs to configure are as follows:

1. Operating system: Windows 7 (64-bit is recommended).

3. Graphics card: video memory 1G or above, bit width of 256 bit or above, video memory type is DDR3 or above, NVIDIA brand graphics card is recommended.

4. CPU: Intel dual-core high frequency 64bit, it is recommended to use i5 series or i7 series, it is recommended that the CPU frequency is higher, ** the processor must support SSE2 (streaming simd extensions 2).

5. Hard disk: not less than 7200 rpm.

6. Display: resolution not less than 1400x900.

CAD features:

1. The user can use the graphical way to interact with the computer, and the WYSIWYG description prototype system is formed, and the management script of the target system is formed, and the running system is automatically generated based on the management script. Generate the corresponding operating system according to the requirements of different operating environments (hardware devices, operating systems, databases, middleware, etc.).

2. Upgrade and maintenance of system business functions: the user's maintenance of the system is the maintenance of the management script; The upgrade of system business functions is a modification of the management script.

3. Upgrade of system technology and operating environment: When users need to change the operating environment of the system, the original management script can be automatically re-analyzed to generate a system that adapts to the new operating environment, and the system is upwardly compatible.

The requirements of CAD for computer configuration are different for each version, taking AutoCAD2017 version as an example, the system requirements of AutoCAD2017 are as follows:

<> it can be seen that Lenovo G480A-IFI, i5 processor, 500G hard disk, 1G discrete graphics card can run CAD perfectly.

How to create CAD 3D effects:

2. Click on the 2D sketch and annotation.

3. Click 3D modeling.

4. Select the 3D view mode such as southwest isometric measurement in the view of the menu bar to facilitate drawing.

5. Select Concept Mode in Rendering in the menu bar.

6. With the cuboid, extrusion and other tools in the toolbar, you can use CAD to draw 3D drawings.

3D Effects Command Member:

1. solprof command: create an outline image of a 3D solid in paper space.

2. SolView command: Use the orthographic projection method to create layout viewports to generate faceted and sectional views of 3D solid and volume objects.

3. SolDraw Command: Generate contour views and section views in viewports created with the solview command.

4. How to use and distinguish between soldraw command and solprof command:

5. The soldraw command needs to be used in conjunction with the solview command, and can only generate outline and section views in the viewport created with the solview command.

6. The solprof command can be used alone, that is, it can be used on any view in paper space, and can create a contour image of a three-dimensional solid.

Used to do CAD computer configuration,At present,Intel Core fourth-generation i7 or later configuration is no problem,The performance gap is not very large,Graphics card selection GTX960 or above,This minimum standard is 1,000 pieces enough。