What to do if the sweeper is particularly noisy

For the problem of high noise of sweeping robots, we must first understand what is the root cause of it? When the sweeping robot is working, the main thing that makes the sound is the motor and the rotating cleaning equipment, so we have to put forward a targeted solution.

As. If the motor is noisy, maybe this problem is more tricky, because the motor is in the center of the equipment, and we non-professionals can't "dissect" the motor. The motor has been in operation for a long time and may be more or less.

In some cases, the noise will become louder, and some will become louder due to the aging of the inside of the motor due to the long service life. In such a situation, the best thing to do is to go to yourself.

The brand owner carries out the repair solution.

As. If the sound of the cleaning equipment is very loud, then it is necessary to see if it is caused by the inflexible rotation of the cleaning equipment? The cleaning equipment can be manually cleaned to see if it works. At this point, remind us when we are using a sweep.

When the robot is used, the equipment must be maintained frequently for subsequent use. No matter what kind of factor causes the noise of the robot vacuum cleaner to become louder, it will affect our mood, so the best thorough solution is also.

It is to find after-sales to solve. In the process of use, we should also do a good job in the maintenance of the sweeping robot.

Healthy place sprinkle hard work sprinkle me.

The reasons for the noise of sweeping robots: 1. The motor has a long service life or aging and causes a loud sound; 2. The noise generated by the cleaning equipment is large. Workaround:

1. Take the sweeping robot to the store where you purchased it and request professional maintenance; 2. In view of the noise caused by the cleaning equipment, pay attention to the protection and cleaning of the sweeping robot in the daily use process, that is, manual maintenance for subsequent use.

1. The reason for the noise of the sweeping robot:

If there is an abnormal noise, it is mainly caused by particle dust entering the universal wheel bearing hole, such as under the bed in the early stage, under the sofa and other places that are not usually cleaned, it is easy to accumulate more dust, and when the sweeping robot enters these places for cleaning, there will be dust particles into the universal wheel bearing hole, resulting in abnormal noise when rotating.

The abnormal sound of the universal wheel mainly includes the abnormal sound of the vertical shaft and the abnormal sound of the horizontal axis: the abnormal sound of the vertical shaft is generally only the noise and abnormal sound when turning, and the transverse shaft, that is, the transverse bearing of the black wheel on the universal wheel, this bearing will appear noisy and abnormal sound after entering the particle dust, regardless of turning or going straight.

Second, the solution.

In this case, you only need to pull out the universal wheel, clean the inner hole of the bearing with a cotton swab, and then open the faucet at home to rinse the universal wheel with water, and rotate the small black wheel by hand while rinsing (the universal wheel bearing is made of stainless steel, so you don't have to worry about rusting after rinsing with water, and you can point one or two drops of cooking oil in the bearing hole to keep lubricating after cleaning).

Extended Information:Common Faults of Robot Vacuum:

1. Error 1 of the sweeping robot: Please dial the red laser head to confirm that it is not blocked or stuck.

Solution: If the laser distance sensor is blocked or blocked by a foreign object, please remove the obstruction or foreign object; If this cannot be cleared, move the console to a new location to boot it.

2. Error 2 appears in the robot vacuum cleaner: Please clean up and tap the collision sensor.

Solution: The collision buffer is stuck, please tap it many times to remove foreign objects, if there is no foreign body, please move the host to a new position to start.

3. Error 3 appears in the robot vacuum cleaner: Please start the host in a new location.

Solution: The wheels are in the air, please move to a new position to start.

4. Error 4 appears in the sweeping robot: Please wipe the cliff sensor and start away from the cliff.

Solution: The host is hanging in the air, please move to a new position to start. Dirty cliff sensor can also cause this fault, please wipe the cliff sensor to troubleshoot.

5. Error 5 of the sweeping robot: Please remove the main brush to clean the bristles and bearings.

Solution: The main brush may be entangled in foreign objects, please remove the main brush and bearing to clean up.

6. Error 6 of the sweeping robot: Please disassemble and clean the side brush.

Solution: The side brush may be entangled with foreign objects, please disassemble the side brush and clean it.

7. Error 7 occurs in the sweeping robot: Please check whether the main wheel is stuck with a foreign object and move to a new position to start.

Solution: The main wheel may be entangled in foreign objects, please clean it up and start it.

8. Error 8 appears in the sweeping robot: Please clear the obstacles around the main unit.

Workaround: The console may be stuck or trapped, please clear the obstructions around the console.

Although technology is becoming more and more developed now, sweeping robots are becoming more and more intelligent, but sometimes the noise is still quite annoying, so it is recommended that you must pay more attention to this aspect when purchasing. In addition, if you have already purchased it, you can actually reduce noise through some other methods, such as using sound-absorbing cotton is very good, and 3M has two models that are very easy to use.

One of them is 2569, which is made of ultra-fine polyester fibers through an advanced non-woven process that is uniformly webbed, with good tear resistance, pressure resistance, peel resistance and excellent medium and high frequency sound absorption performance. It also has excellent aging resistance, and can be used for a long time at 120°C and a short-term use at 150°C.

The other is high flame retardant sound-absorbing cotton 2569FR, which is designed by ultra-fine flame retardant fiber with special fiber structure and prepared by advanced technology non-woven, which has excellent medium and high acoustic properties and excellent flame retardant performance, and is greatly lightweight, and can be made into products with different thicknesses and different weights according to needs.

The reason why the robot vacuum cleaner is noisy:

1. The motor has a long service life or aging and causes loud noise;

2. The noise generated by the cleaning equipment is large.

Solution: 1. Bring the sweeping robot to the purchased store to request professional maintenance;

2. In view of the large noise caused by the cleaning equipment, pay attention to the protection and cleaning of the sweeping robot in the daily use of the cleaning robot, that is, the maintenance of manual socks for subsequent use.

1. The current household sweeper market generally uses vacuum design (that is, the use of negative pressure dust removal), rolling brush, and cleaning brush force. Since the vacuum cleaner is rotated by a motor, the more powerful the motor, the greater the suction power and the louder the sound. So you don't need too much power when buying a home sweeper.

For example, the power of sweepers of brands such as Galeni is about 20W, but it is more than enough to cope with home cleaning.

2. Any sound will become louder in the confined space of the echo, and the louder the noise will be when the sweeper is used in a closed room. Therefore, when the sweeping robot is working, the windows and doors can be opened, which can effectively reduce the noise.

3. Of course, in addition to the noise problem, the regular cleaning and maintenance of the sweeper is also very important. Regularly clean brushes, dust boxes and other components, in the use of air conditioners and other household appliances, we find that after a long time, its noise will become louder and louder, sometimes because the motor is not sensitive, and there is a long-term use of some dust accumulated after the motor operating load becomes larger, and the noise is greater. Therefore, it is necessary to keep the sweeper clean and a way to reduce noise.

4. The noise of the sweeper is also a stubborn problem that the sweeper manufacturer has been committed to solving, some sweepers will install some silencing devices to solve the noise problem, and when choosing a sweeper, you should pay attention to experience whether the noise problem is serious. But you can't judge the quality of the sweeper by noise alone, because some sweeper manufacturers will be opportunistic and take some measures that damage the function of the motor in order to reduce the sound, such as installing a diaphragm to silence the motor, which is very bad for the motor.

1. The screws of the floor scrubber are loose, and when this happens, the screws need to be tightened and adjusted.

3. If the reduction gear of the floor scrubber is damaged, in this case, you should contact the floor scrubber manufacturer in time to replace the gear of the same specification.

4. The bearing of the floor scrubber is broken or loses oil, and the bearing needs to be replaced in this case.

As long as the operation and maintenance are carried out according to the operation specifications of the walk-behind floor scrubber, the work efficiency can be improved and its service life can be effectively prolonged.

Clause.

First, the motor is soaked in water. There is a fan in the motor, once it is soaked in water, it will cause improper operation, it will produce noise, to prevent the occurrence of this problem, it is necessary to maintain the floor scrubber normally, and the sewage tank should be emptied in time and not overflow. Once you encounter water immersion, find the floor scrubber after-sales service in time.

Clause. Second, the sewage tank is blocked. There are many impurities on the ground of cleaning, all of which are sucked into the sewage tank through the suction motor, and the sewage tank is blocked if it is not cleaned up in time, the air is not circulated, and the suction motor will make a loud noise when working, so it is necessary to clean the sewage tank in time and rinse it with clean water. Clause.

3. The suction motor is aging. As the service life of the floor scrubber increases, the fan will age, and the sound will also increase, and the situation to improve the situation is to replace the fan.

Generally speaking, the noise of the automatic sweeper mainly comes from the following three parts: the suction motor part; Walking motors and wheels; Brush motor part. If the noise generated by the suction motor is usually caused by water ingress, the motor bearing part is damaged, and the suction motor can only be replaced in this case.

In addition, if the noise is caused by the failure of the gearbox in the travel motor or wheels, it is necessary to have a professional maintenance staff to repair it. When we use a fully automatic sweeper to clean the floor, there will be some noise to a greater or lesser extent. In the case of noise, don't panic, we can determine the noise according to the location, size and characteristics of the noise, and then prescribe the right medicine to solve it.