Does Y510 have built in Bluetooth? How do you set it up?

Y510 generally has Bluetooth, and it is necessary to use it: 1. Turn on the wireless hardware first, and the physical switch in the left position in front of you needs to be turned on first. 2. Then use FN+F5 to control the turn on and off of wireless and Bluetooth.

3. Confirm that the Bluetooth driver in the device manager is installed. If there is no prompt information on the screen, you need to install Lenovo power management software (including shortcut key driver) first, this step is the premise, otherwise the shortcut key may become invalid. The power management software is in the driver CD, and the name is PM (Power Management) or eEnergyCut.

Configuration queries can be made at this link.

Preparation tools Materials: A Lenovo Y50 computer with Windows 10.

1. First of all, we click the Microsoft button in the lower left corner of the computer, and we click on the settings interface that pops up.

2. In the pop-up interface, we click on the device.

3. In the pop-up interface, we will slide the blue finger tooth search switch to the right to open it.

4、In this way, we will open the Bluetooth on our Lenovo Confession Y50 computer。

Preparation tools Materials: A Lenovo Y50 computer with Windows 10.

1. First of all, we click the Microsoft button in the lower left corner of the computer, and the pop-up interface, we click Settings.

2. In the pop-up interface, we click on the device.

3. In the pop-up interface, we will slide the Bluetooth switch to the right to turn it on.

4. In this way, we will turn on the Bluetooth on our Lenovo Y50 computer.

Tools Material: Computer.

The first step is to turn on your computer and enter the interface, and the second step is to tap the Start button at the bottom left of the screen and then tap Settings.

Step 3, once we are in the settings interface, we tap on the device at the top left of the screen.

Step 3: Click Bluetooth in the interface after entering, and then turn on the Bluetooth switch.

Fourth, after completing the above operations, we have successfully turned on the Bluetooth function.

The notebook can turn on Bluetooth by following these steps:

1.First, click on the menu, click on "Control Panel", and find and open "Network and Sharing Center" in the "Control Panel" interface.

2.In the Network & Sharing Center, click on "Change Adapter Settings".

3.Find the Bluetooth facility in "Change adapter settings" and right-click to select "Show Bluetooth device", and then your computer's Bluetooth will be turned on.

If there is no shortcut key, you can turn it on and off in Settings - Change Computer Settings - Computer and Devices - Bluetooth.

1.Connect the phone to the Bluetooth headset and turn the headset on: press and hold the multi-function button for about 3 seconds after the blue light is on for about 3 seconds, and then release the hand, at this time the blue indicator light begins to flash rapidly At this time, the headset will turn on the Bluetooth sad search state!

The phone will have the name of this Bluetooth headset when it turns on Bluetooth. The sails are quiet.

2.Connect the mobile phone, turn on the Bluetooth switch of the mobile phone, and there will be a Bluetooth switch in the general settings.

3.You will see that after you connect the earphones, they will send out a prompt tone and spring, only the blue light flashes at intervals, hit ** is not on the earphones, if on the earphones, it means that you are connected successfully.

4.Bluetooth device of the headset: Generally, the name of the new headset will be displayed in the way of brand English and model!

5.The mobile phone will prompt you to enter the verification code: generally 4: 0000 or 4: 88886If the battery is insufficient, it is impossible to quickly connect to the phone, and this is generally the case with newly purchased headphones.

Turn the switch on, and then drive, if you don't understand, you can contact me, mine is 550

Step 1: Confirm that the computer has Bluetooth, and if you don't have Bluetooth, you can buy a Bluetooth adapter. To confirm the method, the computer --- right-click --- manage --- device manager.

Step 2: Right-click --- the Bluetooth icon in the lower right corner of the desktop --- add a device.

Step 3: Select the Bluetooth speaker found and click Next. The computer automatically installs the driver and shows that the device was successfully added. The computer automatically installs the driver and shows that the device was successfully added.

Step 4: Start Menu --- click on Devices & Printers.

Step 5: Start menu--- click on Devices and Printers. Find the Bluetooth speaker, select it, and right-click on the properties.

Find the Bluetooth speaker, select it, and right-click on the properties. Switch to the Services tab, select all the options, and confirm, and the driver will be installed on your computer.

Step 6: Double-click the Bluetooth speaker icon, the following window will pop up, click Connect, please note that this window Bluetooth speaker ** cannot be turned off during the process, otherwise, the Bluetooth connection will be interrupted. When the computer is turned on again to connect to the Bluetooth speaker, you also need to repeat the fourth and fifth steps, and the computer is not connected by default when it is newly booted.

The notebook can turn on Bluetooth by following these steps:

1.First, click on the menu, click on "Control Panel", and find and open "Network and Sharing Center" in the "Control Panel" interface.

2.In the Network & Sharing Center, click on "Change Adapter Settings".

3.In "Change adapter settings", find the Bluetooth facility and right-click to select "Show."

bluetooth

device", and just like that, the computer Bluetooth is turned on.