What is the initial Apple 7 Access Restrictions password

Introduction to the initial password of the iPhone access restriction: The iOS system does not have any initial password, and all the passwords in the system are set by the user. You can't get it back after you forget the access restriction passcode, you can only connect iTunes and use "Restore iPhone" to clear it.

Note: "Restore iPhone" will erase all data in your iPhone, it is recommended to back up first.

Apple 6 iOS does not have an initial access restriction password, if you forget it, you can do it as follows:

1. After the data on the phone is backed up, we can start to restore the system for the iPhone. First, connect your iPhone to your computer, then press and hold the power button on your iPhone and slide it to power off.

2. Then please follow the steps below to let the phone enter recovery mode: for the first operation, you may not be familiar with it, just try a few more times. Next, please click the "Restore iPhone" button in the iTunes window as shown in the image.

3. Then we will be prompted that once we choose to recover, all the data on the original iPhone will be erased, at this time, please click the "Restore or Restore and Update" button to continue.

5. When iTunes** completes the firmware, the system will be automatically restored and updated to your iPhone. Once the restore is complete, reactivate your iPhone.

6. After the final restoration is completed, follow the backup steps mentioned above to restore the data from the previous backup to your iPhone.

The iPhone does not have its own access restriction password, and all the passwords are set by yourself after opening and activating the phone. So if it has any password, it means that the phone has been used.

Hello, I am glad to answer for you that the initial is generally 000000 or 123456. This is not fixed, you have to set it yourself, it can be 4 digits, or 6 digits. If you forget your password, you can find a way to retrieve it, and the specific operation is attached to the extension.

01 The passcode of the access restriction and the unlock passcode of the iPhone may be the same, you can try to enter the unlock passcode of the iPhone to turn on the access restriction first. 02If it still doesn't turn on, you need to restore the system again. Connect your phone to your computer, open iTunes, and tap the phone icon.

03On the mobile phone information page, click Back up now to back up all the data on the mobile phone to the computer. 04 Press and hold the power button and slide the button to turn off the phone. 05Long press the power button and home button to put your phone into recovery mode.

06 In recovery mode, click Recover in iTunes In the pop-up page, click Restore & Update. 08Follow the prompts that appear, and then click Agree. 09Jump to the **page,**After completion, the system can be automatically restored.

10 When the system restore is complete, turn on your phone and tap Restore Backup in iTunes. 11In the pop-up page, select the previously backed up data, click Restore, all the backed up data will be restored to the phone, the access restriction has also been disabled, you can reset the password of the access restriction.

There is no initial password for iPhone 6 access restrictions, and the password is set by me.

If you have forgotten the password for access restrictions, you can only back up the important data of your phone and restore it to factory settings, the specific method is as follows:

First, click "Settings" on the desktop of your phone.

Second, then select the "General" option.

<> Fourth, click on the "Reset All Settings" option after entering.

5. Then enter the password to verify.

If you forget the password of the access restriction, you can only restore the phone to factory settings, the specific method is as follows:

Hello. All passcode options on iPhone are added by the user, and there is no initial passcode. If you forget it, you can connect it to your computer and restore it in iTunes. For details, please refer to the tutorial (the tutorial is universal.)

Hopefully my answer will help you.

The iPhone access restriction password is set by the user, the access restriction is turned off by default, and the user sets the digital password when it is turned on.

The method described here is to restore the system of the iPhone with the help of a computer, which is commonly referred to as flashing. If you don't have important data on your iPhone, such as **, contacts, text messages, ****, etc., you can drift through this step. If you have one, back up the data on your iPhone first.

<> iTunes on your computer When you're ready, connect your iPhone to your computer and click the iPhone icon in the window.

Then click the "Back Up Now" button in the iTunes window and back up your iPhone data according to your needs.

end to restore the system.

Once the above backup operation is complete, you can start to restore the system for your iPhone and solve the problem with the restrictions passcode. First, please press and hold the power button of your iPhone, and then slide it to power off.

Next, follow the steps below to get your iPhone into recovery mode

First, please press and hold the power button to turn on, then the screen will appear Apple logo, do not release the power button;

2. Then press and hold the home button on the home screen until the screen goes black.

3. When the screen is black, please release the power button, and don't release the home button on the home screen until iTunes on the computer side detects an iPhone in recovery mode

Note: If you haven't operated before, if you don't succeed, you can try a few more times. Also, if your iTunes pop-up is different from the one below, please close it.

<> iTunes then connects to the internet and prompts us if we want to restore and update the current iPhone to the latest version. Click on the "Restore and Update" button to proceed as shown in the image.

iTunes will then automatically connect to Apple's update servers,** the latest iOS system firmware currently available for your iPhone. Due to the relatively large capacity of the firmware, the speed is fast and slow, depending on your current network speed.

If your iPhone automatically restarts during iTunes** firmware, just follow the previous method to put your iPhone into recovery mode again and do it again. When the firmware is complete, the system is automatically restored for your iPhone. After the restoration is completed, you will enter the activation interface, and you can reactivate your iPhone.

If you've backed up your iPhone before, just go ahead and restore the backup in iTunes.

iOS 6 does not have an initial restrictions passcode.

1. First of all, we need to find the "Settings" program on the desktop of our Apple 6 mobile phone, click to enter the program, as shown in the figure below:

2. After that, in the opened "Settings" program page, we find the "General" option, click to enter the option, as shown in the figure below:

3. After that, find the "Access Restriction" option in the "General" program page that opens, and click to enter the option, as shown in the figure below

4. After that, click on the "Enable Restrictions" option in the open "Access Restrictions" program page as shown in the figure below

5. After that, in the "Set Password" page, enter a four-digit password twice in a row, and then the access restriction password of our Apple 6 mobile phone will be set successfully.

If you want to set a password for the first time you enable access restrictions on a new phone, you say you want a password to log in is to let you enter the password twice, and this password is the password for the access restrictions you want to set.

1. Go to [Settings] on iPhone6 and select [General].

2. Select [Access Restrictions], and then select [Enable Access Restrictions].

3. Set a password, enter the same password twice in a row to turn on access restrictions, and then there are options to choose from below.

Apple 6 iOS does not have an initial access restriction password, the initial access restriction password is set by the user himself at that time, if you forget, remember iCloud, and restore the iPhone to factory settings.

Apple iphone 6 access restriction password forgot how to deal with:

Step 1: Back up your data.

If you have important data on your phone, you need to back it up to your computer first.

On the computer with the iTunes software installed, connect your iPhone to the computer and click the iPhone icon in the window;

In the summary window on your iPhone, click the Back Up Now button, then back up as needed.

The second step is to restore the system.

Connect your iPhone to your computer, press and hold the power button on your iPhone, and then slide it to power off.

Press and hold the power button to turn on, the Apple logo will appear on the screen, do not release the power button;

Then press and hold the home button on the home screen until the screen goes black;

When the screen goes black, please release the power button, and do not release the home button on the home screen until iTunes on the computer detects an iPhone in recovery mode;

Click the "Restore iPhone" button in the iTunes window;

Then we will be prompted that once we choose to recover, all the data on the original iPhone will be erased, click the "Restore or Restore and Update" button to continue;

After the final restoration is complete, follow the backup steps described above to restore the data from the previous backup to your iPhone.

You can set this up for you, as long as you remember it yourself.