How to learn the course of Certified Safety Engineer Case Study? That s a lot of questions

It is recommended to search for accident cases on the Internet.

Accident cases are generally divided into the following sections:

First, the course of the accident (time, place, process, personnel) Second, the cause of the accident (this place mainly needs to sort out the direct cause and indirect cause, and the direct cause and indirect cause mainly include factors that can be found).

Third, the division of accident responsibility (clearly distinguish direct responsibility, indirect responsibility and leadership responsibility, these entries can be searched on the above, go and learn it).

Fourth, the same kind of accident prevention measures (generally divided into: equipment, personnel, safety education and training are almost the same).

These things can be seen in conjunction with exam review materials. It doesn't take much to see how difficult it is.

Note: The practical subjects of safety engineers in the cooker book are relatively difficult among the four examination subjects for registered safety engineers. There are a total of seven majors to choose from, and candidates can apply for the exam according to their own situation.

"Professional Practice of Safety Production" includes two parts: professional safety technology and safety production case analysis, the professional safety technology part of the question type is objective, all of which are multiple-choice questions, accounting for 20% of the score, and the safety production case analysis part of the question type includes objective questions (accounting for 10% of the score) and subjective questions (accounting for 70% of the score), the objective questions are multiple-choice questions and multiple-choice questions, and the subjective questions are comprehensive case analysis questions. Practice is a synthesis of the other three subjects, which is flexible, requires more points, and needs to be written.

The practical subject is one of the relatively difficult subjects in the Certified Safety Engineer exam, which requires us to spend more effort to study. The pass rate of certified safety professionals is 18%-28%, but it is not so easy to pass at the first time. At present, the number of applicants for the safety engineer exam is increasing year by year, and the pass rate of the exam is also decreasing year by year.

1. According to the development prospects:

On the premise of considering your own factors, you can also make a decision based on the demand for social enterprises and the number of applicants for each major.

2. According to the needs of the work:

Obtaining the certificate is basically because of the needs of the job, so when choosing the professional direction of safety engineer, you must first start from your own reality, analyze and choose carefully according to your own work experience and future work development prospects.

3. According to my major:

If you still can't choose a professional direction that suits you after doing the above two jobs, then you need to refer to your academic background and the professional direction you learned when you go to school to choose, so that the major you choose will be more in line with your actual situation, and the exam will be easier.

Registered Safety Engineer Exam Subjects.

The content of the 4 subjects of the Registered Safety Engineer Examination: "Safety Production Law and Related Legal Knowledge", "Safety Production Management Knowledge", "Safety Production Technology" and "Safety Production Accident Case Analysis", all subjects must be passed within two consecutive years before registration. The total score of each of the four subjects is 100 points, and 60 points are generally regarded as passing the examination.

The question type and score of the safety engineer exam.

The examination questions of "Work Safety Law and Related Legal Knowledge", "Work Safety Management Knowledge" and "Safety Production Technology" are objective questions. "Multiple choice questions" require you to choose one of the alternatives that best matches the question as the answer, and each question is worth 1 point. In the "multiple-choice question", 2 or more of the alternatives for each question match the meaning of the question, and at least 1 item is wrong, and no points are awarded for this question.

The "Safety Production Technology" paper consists of 1 group of compulsory questions and 4 groups of optional questions, and the compulsory questions are the content of chapters 1 to 6 of the subject; The four groups of optional questions are "Mine Safety Technology" (Chapter 7), "Construction Safety Technology" (Chapter 8), "Hazardous Chemicals Safety Technology" (Chapter 9) and Comprehensive Safety Technology (Chapters 1 to 6). Candidates are required to complete the content of the required questions (90% of the score) and any set of optional questions (10% of the score). Dali Education replied.

It's all about the same, and it's easier to test than a safety accident.

1.Stick to the syllabus and read through the textbook.

The importance and necessity of the test syllabus: all the candidates' preparation planning arrangements must not be separated from the syllabus, the syllabus is the foundation of the Zhuan exam, and the test points in the textbooks and the important and difficult points will be reflected in the exam;

2.Consolidate basic knowledge and focus on understanding & memorization.

Note: The question types of the security exam are mainly divided into multiple-choice questions and case analysis questions; It must be admitted that the design mode of these two question types is relatively easy for candidates to answer the questions, and in the case of more comprehensive information prompts for the multiple-choice question type, many students are confident that they can get high scores, and the same is true for case analysis questions, which is not surprising, after all, the design of these two question types determines the importance of understanding as a prominent factor; However, sometimes it causes some students to be imprecise about some test points, unable to remember accurately, always a general vague impression, and when it comes to the specific topic, they fall into an ambiguous choice and dilemma: answer A is right, answer B seems to be right, answer C can also be said, and answer D seems to make sense;

The premise of focusing on understanding is accurate memory, test point memory, and the basic knowledge points of the four subjects of the Zhuan exam should be firm and accurate; For example, the pre-job safety training time of employees in a chemical enterprise shall not be less than how long (answer: 72 hours), if they cannot be accurately memorized, then the answer cannot be started;

The second point is actually related to the first point, and the premise of the consolidation, memory and understanding of knowledge points lies in reading through the outline and understanding it thoroughly; Therefore, the syllabus needs candidates to read it over and over again and understand it thoroughly; The reading and understanding of the syllabus requires specific personal learning habits, learning methods and specific time arrangements; However, it is emphasized here that the study of the four subjects of the Note Safety Examination is not a simple and independent single subject study, and there is interoperability between each other, so it is recommended that candidates must pay attention to the interoperability between knowledge points when reviewing, and must deeply grasp it and draw inferences from one another;

3.Breakthrough of major difficulties.

Note: The full score of the security test is 100 points, and the passing score is 60 points; Relatively speaking, some candidates do not expect to pass the exam with a high score, but there are also some candidates who hope to break through with a high score;

In general, the way to improve divergent thinking and understanding ability lies in doing more, thinking more, and asking more questions.

4.Exam training.

Past question training is divided into chapter training and past past question training; Chapter training is to consolidate and strengthen the knowledge points, chapter training helps to test the candidate's grasp of the knowledge points of each chapter of the subject, so as to check and fill in the gaps, and the past question training is aimed at the detection and positioning of the overall knowledge points of each subject of the candidate, and the two complement each other; In addition, the past question training can bring candidates into the exam in advance and familiarize themselves with the exam, so as to better prepare for the exam;

See and do more, especially the practice questions.

The practice of registered safety engineers is a comprehensive discipline, which needs to be handwritten, mostly objective questions, and it is necessary to look at more example questions and summarize the answering ideas and answering skills. Especially for the case questions of the real questions, you can know that the difficulty of the questions is in the **, the knowledge points that you like to investigate are in the **, and the practice is put in the last to learn.

"Professional Practice of Safety Production" includes two parts: professional safety technology and safety production case analysis, the professional safety production technology part of the questions are objective questions, all of which are multiple-choice questions, accounting for 20% of the score, and the safety production case analysis part includes objective questions (accounting for 10% of the score) and subjective questions (accounting for 70% of the score), the objective questions are multiple-choice questions and multiple-choice questions, and the subjective questions are comprehensive case analysis questions. Practice is a synthesis on the basis of the other three disciplines, with great flexibility, and Chi Yu has to grasp the essentials poorly, and needs to write.

The practical course is one of the relatively difficult subjects in the Registered Safety Installation Engineer examination, which requires us to spend more effort to study. The pass rate of certified safety professionals is 18%-28%, and it is not so easy to pass in one go. At present, the number of registrations for the safety installation engineer exam is decreasing year by year, and the pass rate of the exam is also increasing year by year.

1. According to the development prospects:

On the premise of considering their own incentives, observe the development prospects of each major, and make a decision based on the demand of social enterprises and the number of applications for each major.

2. According to the needs of the work:

Therefore, when choosing the professional direction of safety installation engineer, you must first start from your own reality, analyze and choose carefully according to your own work experience and future work development prospects.

3. According to my major:

If you still can't choose a suitable professional direction after doing the above two tasks, you need to refer to your diploma and the professional direction you learned when you read the code joke book to choose, so that the major you choose will be more in line with your actual situation, and the exam will be easier.