What does inorganic paint mean What is inorganic paint

Inorganic coating means a coating with inorganic materials as the main film-forming substance, which is the abbreviation of all inorganic mineral coatings.

Inorganic coating is an inorganic polymer coating composed of inorganic polymer and dispersed activated metal, metal oxide nanomaterial, rare earth ultrafine powder, which can react quickly with iron atoms on the surface of the steel structure to produce an inorganic polymer anti-corrosion coating with physical and chemical dual protection and firm combination with the matrix through chemical bonds, which has no pollution to the environment, long service life, anti-corrosion performance has reached the international advanced level, and is a high-tech replacement product that meets the requirements of environmental protection.

Inorganic coating features:

1. Petrification: The secret of inorganic coatings is the petrification of inorganic coatings with mineral substrates (chemical reaction and chemical combination to form a waterproof and acid-proof silicate rock).

2. Non-combustible: Inorganic coatings have the characteristics of inorganic substances, and their temperature resistance is particularly good, not only will not burn at a high temperature of 1200, but also flame retardant.

3. Air permeability: inorganic coatings have waterproof properties and high respiration power, so that the water inside the stone building can evaporate freely; At the same time, it has the filtering effect of alkaline substances, which can prevent the coating from bubbles, thermal bursting, scaling and peeling, and alkali contamination after construction.

Inorganic coating is a kind of coating made of inorganic healthy materials, which contains some healthy minerals, and it is made of inorganic polymers with some other healthy materials, and the steel structure can play a good role in double-layer protection, this material is basically used in the decoration of buildings. Inorganic coatings recommend the choice of Taysel.

1. Inorganic coating is a kind of coating made of inorganic healthy materials, which contains some healthy minerals, and it is made of inorganic polymers and other healthy materials, which can play a good role in double-layer protection with steel structure, and this material is basically used in the decoration of buildings.

2. It can also produce anti-corrosion effect through some other organisms, which is not polluting to the environment, and has a very long service life, and it is a relatively environmentally friendly material.

3. In addition, the inorganic material itself is not polluted, its material is very natural, and some pigments can be filled in it to make a variety of colors, with good water resistance, alkali resistance, and its anti-pollution and weather resistance are also very good. [Understand the market prospect of art paints].

If you want to know more about inorganic coatings, we recommend consulting Tescher. Taisher has achieved many good results in the layout of the five-in-one strategy of developing high-quality products, implementing the brand strategic route, continuous terminal empowerment, active marketing + new retail, and building a world-class brand, so it can also be ranked among the top ten brands of art paints in China in 2021.

Inorganic coatings. It refers to the coating made of inorganic binder material as the main binder, with certain additives and pigments.

In this concept, there is a quantitative problem of "inorganic bonding wheel chain barricade material as the main binder", and the industry generally believes that the coating with organic content of no more than 5% in the coating is inorganic coating.

It mainly has the following characteristics:

1. Petrochemical: The secret of inorganic coatings is the petrochemical interaction between them and mineral substrates (chemical reaction and chemical reaction) to form a waterproof and acid-proof silicic acid.

rocks). 2. Non-flammable: inorganic coatings have inorganic substances.

Its temperature resistance is particularly good, not only will it not burn at a high temperature of 1200, but it is also flame retardant.

3. Air permeability: inorganic coatings have waterproof properties and high respiration power, so that the water inside the stone building can evaporate freely; At the same time, it has the filtering effect of alkali substances, which can prevent the coating from bubbles, thermal bursting, scaling and peeling, and alkali contamination after construction.

4. Sterility and moss breeding: inorganic coatings have the characteristics of alkali (pH value above), can kill bacteria and bryospores, and its air permeability (similar to the human body, water can not be discharged and sweat can be discharged) can keep the building dry; Therefore, there is no need to rely on mold inhibitors or preservatives.

to resist the growth of mold and moss, and achieve the effect of natural moisture-proof and mildew-proof.

The habit of naming coatings is generally classified according to the main film-forming substances, inorganic coatings usually refer to a class of coatings with inorganic materials as the main film-forming substances or binders, and organic coatings usually refer to a class of coatings with organic materials as the main film-forming substances or binders. If you need to use stepless coatings, we recommend Taysel. The specific differences between organic and inorganic coatings are as follows:

1. The difference between composition and raw materials.

Inorganic coating is a kind of coating with inorganic materials as the main film-forming substance, which is composed of various inorganic polymers, rare earth nano-scale ultrafine powder, and some auxiliary materials, which is the abbreviation of all-inorganic mineral coating. Organic coatings are coatings composed of polymer compounds as the main film-forming substances. It is applied to the surface of the object to form a coating film that adheres firmly.

2. Environmental performance.

The binder material of inorganic coatings is directly taken from nature, and its main raw material is natural rock. At the same time, compared with some organic coating binders, the production and use of inorganic coating binders have little pollution to the environment, and most of the products are based on water as the dispersion medium, without adverse effects on the environment and health. Some organic coatings are easy to emit harmful gases and affect human health.

3. Economic performance.

The aging resistance and some physical and chemical properties of inorganic coatings are difficult to achieve for most organic coatings with the same production cost, so they have good technical and economic properties. [Understand the market prospect of art paints].

The raw material of organic coatings is resin, and the raw materials of inorganic coatings are inorganic minerals.

Inorganic paints use natural inorganic pigments, so the color never fades (experiments have proved that after 5000mh is equivalent to 70 years, the color remains the same); The emulsion paint uses synthetic pigments, which have been proved to be equivalent to 50%-70% fading after 600 days.

The inorganic coating reaches Class A fireproof, can withstand high temperature of 1200 degrees Celsius, flame retardant, and does not produce harmful gases; Latex paint is not fireproof, non-flame retardant, and will produce harmful gases.

The inorganic coating experiment proves that it can be washed more than 8000 times, and the stains on the general wall can be sprayed clean with a high-pressure water gun, and the stubborn ones can be cleaned with fine sandpaper or general acid detergent without affecting the paint itself; Latex paint cannot be cleaned with a high-pressure water gun (which can cause problems such as paint peeling and peeling) and the only way is to repaint.

Inorganic paint is alkaline, so it is not invaded by the wall, nor will it cause staining, chalking and peeling, and moss, algae and microbacteria will not grow; Latex paint is acidic, easy to be damaged by the alkaline damage of the wall, resulting in chalking and blistering, and organic ingredients help bacteria breed, causing problems such as mold on the wall.

Inorganic coatings have waterproof properties and a high degree of respiration (breathability), which allows water to evaporate freely from the inside of the wall and keep the wall dry; Latex paint has a layer of impermeable film, which is affected by the following factors, which will make the wall often contain moisture and moisture: 1alkali ** attack; 2.

Reduces adhesion and easily falls off blisters; 3.Affects the structure of the wall, especially the water-soluble calcareous.

In the general environment, the life of inorganic paint is 3-5 times longer than that of latex paint, and 5-10 times longer than that of latex paint in extremely harsh weather or environment; After 1-2 years, latex paint will appear moss, "spit white", fade, accumulate dirt, and become seriously polluted and fall off.

Answer: Hello, I am happy to answer for you how to distinguish between inorganic coatings and organic coatings after doing 1Service life. The lifespan of organic is about 2 to 3 years, and after the time passes, it will fade and may fall off.

Inorganic is different. 2.Cleaning and maintenance.

The practice is different, when maintaining organic coatings, it is forbidden to clean with high-pressure water guns, which will cause the paint to fall off. 3.Construction steps.

Organic paints are acidic and should be primed before application before they can be painted, at least twice. Compared with the application of organic paints, the application method of inorganic paints is simple.

Have a great day.

Organic coatings generally refer to coatings with various emulsions as the base material, the emulsion is a variety of polymers, and the base material of inorganic coatings is generally water glass, such as potassium water glass, sodium water glass, etc.

There are too many to be made clear in one or two sentences.

Inorganic coatings are more weather-resistant, while organic coatings are more expressive.

Inorganic coating is a kind of coating with inorganic materials as the main film-forming substance, which is the abbreviation of all inorganic mineral coatings, which are widely used in construction, painting and other daily life fields because of their high performance.

Inorganic coating is an inorganic polymer coating composed of inorganic polymer and dispersed activated metal, metal oxide nanomaterial, rare earth ultrafine powder, which can react quickly with iron atoms on the surface of the steel structure to produce an inorganic polymer anti-corrosion coating with physical and chemical dual protection and firm combination with the matrix through chemical bonds, which has no pollution to the environment, long service life, anti-corrosion performance has reached the international advanced level, and is a high-tech replacement product that meets the requirements of environmental protection.

There is no clear definition of inorganic coatings, and according to people's habits, it generally refers to a type of coating with inorganic materials as the main binder. Here, the meaning of the main binder is that some inorganic binders (such as silica sol) must be compounded and modified with a certain amount of organic binders when formulating coatings to make up for the lack of performance.

Since the 70s of the last century, China's architectural coatings began to develop, China's production of inorganic architectural coatings are mainly silica sol and silicate solution, and from the variety of coatings, there are mainly two-component potassium silicate exterior wall coatings, silica sol exterior wall coatings with an appropriate amount of organic binders, inorganic anti-mildew coatings, inorganic fireproof coatings, inorganic thermal insulation coatings, inorganic anti-condensation coatings, cement-styrene acrylic emulsion exterior wall coatings and acid-modified sodium water glass coatings.

Summary. Inorganic coatings are coatings with inorganic materials as the main film-forming substances, and are widely used in daily life fields such as architecture and painting. It was used for painting and architectural decoration by the people of western China thousands of years ago, but it is still well preserved.

In addition, the inorganic coating water glass is the original main raw material of silicon coating.

Inorganic paints are paints with inorganic materials as the main film-forming substance, and are widely used in daily life fields such as architecture, painting, and painting. It was used for painting and architectural decoration by the people of western China thousands of years ago, but it is still well preserved. In addition, the inorganic coating water glass is the original main raw material of silicon pat-based coatings.

Inorganic coating Inorganic coating Coatings with inorganic materials as the main film-forming substances. The coatings commonly used in construction engineering are aqueous solutions of alkali metal silicates and aqueous dispersions of colloidal silica. With the above two film-forming materials, it can be made into silicate and silica sol (colloidal silica) inorganic coatings, and then add pigments and fillers to pure volts and various additives, which can be made into silicate and silica sol (colloidal silica) inorganic coatings, which have good water resistance, alkali resistance, stain resistance and gas resistance.

Inorganic coating Coating: Coatings with inorganic materials as the main film-forming substances. The coatings commonly used in construction engineering are aqueous solutions of alkali metal silicates and aqueous dispersions of colloidal silica. With the above two film-forming substances, it can be made into silicate and silica sol (colloidal silica) inorganic coatings, and then add pigments, fillers and various additives to make silicate and silica sol (colloidal silica) inorganic coatings, which have good water resistance, alkali resistance, pollution resistance and gas resistance.

Inorganic coating is an inorganic polymer coating composed of inorganic polymer and dispersed activated metal, metal oxide nanomaterial, rare earth ultrafine powder, which can react quickly with iron atoms on the surface of the steel structure to produce an inorganic polymer anti-corrosion coating with physical and chemical dual pruning and protection, and a solid combination of chemical bonds and the matrix. Inorganic polymer anticorrosive coating is a high-tech product developed to meet the special requirements of aerospace, military and other fields, and the product has been successfully applied in the field of aerospace and military industry and gradually promoted to all sectors of the national economy. Now this new type of inorganic polymer anticorrosive coating has become the most common and important coating for the protection of steel.

Inorganic polymer anticorrosive coatings have almost no competitive opponents in the application of important anticorrosive fields such as atmosphere, underground, marine, chemical materials, petroleum and petrochemical liquids, and sewage. Open Categories: Inorganic Coatings, Inorganic Mineral Coatings.