The computer crashes after booting up and displaying the motherboard logo

Computer freezes are generally a memory problem

1.Insufficient memory capacity, applications taking up too much memory space will cause crashes;

2.Application memory space allocation errors can cause panics;

3.Poor memory quality, where the data written to memory by the application cannot be read, resulting in a crash;

4.Conflicts between multiple applications over memory address allocation can also cause crashes;

5.The system is infected with a virus, and a large number of viruses replicate in memory, resulting in insufficient available memory of the application, resulting in application memory allocation conflicts and crashes.

Although many crashes are ultimately attributed to memory, it does not mean that the memory is broken, and it may also be due to a virus that causes system chaos and a memory conflict.

How to fix the computer freeze:

1.Start Task Manager: Press [Ctrl+Alt+del] to quickly launch Task Manager.

Note: When the computer crashes and is unresponsive, you can often press the Ctrl+Alt+Del key combination to start the Task Manager), under the Task Manager window.

Application" bar, select the task you want to end (select the task of making the computer crash), and then click "End Task";

2.After booting up, use Guard and antivirus, and comprehensively examine the computer;

4.If the above methods do not work, press the power button of the computer to force the shutdown and back up the data, format the whole disk and reinstall the system.

Unplug the power socket and plug it back in, which is to unplug the power supply instead of pressing the power button.

1. This kind of problem may be caused by external devices first, unplug all the equipment of the computer, including the keyboard, mouse, USB flash drive, and even the keyboard and mouse of the PS2 interface, and only leave the ** line of the monitor, and then restart the machine;

2. Secondly, the motherboard error may also cause the computer to be stuck in the motherboard logo, you can restore the BIOS to factory settings, if you can't set the BIOS or can't enter the BIOS, then directly remove the motherboard battery and install it back, you can restore the BIOS settings to the default settings;

3. Then the damage of the hard disk or hard disk data cable may also lead to this problem, the hard disk will not be able to pass the motherboard logo when it is not detected, you can unplug the hard disk and reboot it, if the problem no longer appears, it means that it is a problem with the hard disk or hard disk data cable;

4. Finally, the motherboard or memory failure will also cause the boot to stop at the motherboard logo, wipe the gold finger after removing the memory module, and then plug it back in, if the computer has multiple memory installed, then only keep one memory module at a time and try alternately until you find out the memory module in question, the motherboard problem is caused, you need to send it for after-sales repair or replace the new motherboard.

This situation may be due to the fact that the computer cannot detect a certain hardware during the self-test or is stuck in the detection of a certain hardware.

1. Keyboard and mouse, the boot self-test will detect the mouse and keyboard, if there is a problem, it will cause the card to the self-test interface, the solution is to unplug the keyboard and mouse, check whether it passes the self-test, if it passes the self-test, replace the mouse and keyboard.

2. Hard disk and optical drive, the most likely is the hard disk and optical drive, the desktop needs to open the chassis, unplug the power cord of the hard disk optical drive to see if it passes the self-test, if it passes, further rule out the problem of hard disk or data cable.

3. If none of the above is true, then the most likely thing is that there is a problem with the motherboard BIOS and needs to be returned to the factory for repair.

The computer boot has been stuck in the motherboard logo interface, indicating that the problem was found during the power-on self-test, and it needs to be checked one by one, and the problem can be entered normally after the problem is solved. 1. If you can't enter the system because the motherboard logo is displayed at boot, you need to restart and press the TAB button to skip the LOGO screen or press the DEL key continuously (F2 or other specified hotkeys for notebooks) to enter the CMOS setting interface, and turn off FullScreenLogoShow in the AdvancedBiosFeatures tab to see if the POST information can be displayed, and then determine the problem. 2. Under normal circumstances, according to the prompt information of the black screen and white characters on the screen, press the F1 key to skip the non-fatal error and start the computer directly, or press the del key to enter the CMOS, and then press F9 to load the predefined parameters or select LoadoptimizedDefaults (load the high-performance default) or LoadFail-SafeDefaults (load the fail-safe default), and then press F10 to save and exit the restart.

3. If the original CMOS parameters are not saved or the system time in CMOS is restored to the factory time after the shutdown and power off, it may be that the motherboard battery is invalid, and the battery needs to be replaced, and then load the predefined parameters and save them according to step 2. 4. If the above operations are invalid, it means that there is a problem with the hardware, generally due to poor contact of the memory due to oxidation, or the hard disk may be damaged due to poor connection or hard disk master boot record, you need to re-insert the memory or hard disk, or repair the hard disk master boot record, or reinstall the system or replace the hard disk.

Questions. It's useless.

If it's useless, we'll have to reinstall the system, dear.

Questions. Now it's useless to press any button, and there is no way to reinstall the system, because it's stuck on the logo page, and it's useless to restart the battery and pull out the power.

Stuck in the boot interface, it means that the hardware has not passed the BIOS test, and there is no half-dime relationship with the system, it can only be a hardware failure.

You can enter the logo interface, at least it means that the CPU-+ motherboard + graphics card is good, the problem is that the memory is bad, the hard disk cable is wrong or the hard disk is damaged, and the detection card is very much stuck on the hard disk.

In both cases, the computer will get stuck.

Overhaul, 1--- re-seat the installation memory, and only work with a single memory. At the same time, work together to unplug the hard drive cable.

2--- Reseat the hard disk cable, change the position, observe the effect, if you unplug the hard disk, the computer can complete the third page detection, enter the English warning interface (no hard disk, warning setting startup item).

However, if the hard disk is connected, it will freeze, indicating that the hard disk is a problem and the hard disk needs to be replaced.

1. The boot card is stuck in the logo interface, which is generally a problem with the computer hard disk, that is, the computer hard disk has a bad sector, resulting in the data being unreadable, so it is stuck.

2. The solution is to use a USB flash drive to make a startup tool, enter the PE system, and select the computer hard disk partition tool on the desktop - DiskGeinus. This tool can detect whether there are bad sectors on the hard disk of the computer, and you can also repair the bad sectors of the computer, select the C disk, and then click to repair the bad sectors, and then restart the computer, if the bad sectors are many but concentrated, you can also use this software to shield the partition where the bad sectors are located (pay attention to record the number of cylinders where the good and bad sectors are located) If the bad sectors are many and scattered, then change the hard disk. The following figure shows the interface of diskgeinus repair detection and repair of bad sectors.

Look at the description,It should be caused by the motherboard battery is out of power,Go to the stationery store to spend two dollars to buy CR2032 battery replacement,After replacing it, the boot appears as you prompt in the picture above,Press the F1 key to enter the system,Modify the date and time immediately after entering the system。

Here's how to solve the problem:

1. We can see from the above figure that it is a problem with the BIOS settings, and we only need to find the corresponding settings to solve the problem. Press the BIOS boot button first, then we can choose the Chinese mode, click on "Advanced Mode" at the bottom, as shown in the figure: Jane or Dou.

<>3. Press F10 to save, restart the computer, and the problem of staying on the motherboard logo will be solved.