What should I do if my Huawei phone falls into the water and I turn it on immediately

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Depending on what model you are, Huawei has several mobile phones that are waterproof, such as Huawei Mate20, Huawei Honor 10, Huawei P20 Pro, Huawei Nova 3, Huawei P30 Pro, etc. These mobile phones are waterproof, and there is no big problem in the water, just don't charge them immediately, because there may be water in the charging port, and if you charge it, the battery may be damaged, you can check if your mobile phone model is waterproof or not, if it is not waterproof, you may have to repair the motherboard, because it cannot be turned on immediately after entering the water.

How to deal with water ingress on your phone - Android phone.

1.The phone is powered off as soon as possible.

2.Shake it dry, but don't shake it off. The idea is to throw the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

5.If you have fallen into corrosive liquids (such as toilets, seawater, etc.), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

6.Disassemble the machine as soon as possible and clean it with alcohol or professional washing water. If you can't disassemble the machine yourself, it is recommended to send it to a repair shop.

7.Put your phone in a jar or bag full of rice for at least 24 hours and do not turn it on during that time.

How to deal with water ingress in the mobile phone - iphone

1.Do not turn on the machine and shake it.

2.Use a towel to wipe off the water off your phone's case.

Immediately remove all casings and quickly unplug the SIM card and store it somewhere else. Use a tissue to suck up the water in the headphones, dock and SIM card slots.

3.Use a damp towel to wipe off hard-to-remove stains.

There are also many types of flooding and flooding. For example, in addition to fresh water, there are muddy water, sea water, fruit juice, etc. If fresh water enters the phone, you can wipe off the water with a towel after turning it off. If water enters the interface of the mobile phone, it can be removed with a paper towel or cotton swab.

If water containing impurities such as seawater or juice enters the phone, after confirming that the phone is turned off, the towel should be wrung out carefully to remove the impurities left in the phone. If there is a foreign object attached to the earphone and dock port, it will corrode the phone and cause the phone to malfunction. So it should be carefully removed.

1. After the mobile phone enters the water, please keep away from the water source and turn off the phone immediately, if the mobile phone has been automatically turned off, please do not try to turn it on.

2. Please wipe the water stains on the surface of the mobile phone immediately, and place the mobile phone in a strong water-absorbing environment (such as activated carbon, rice, moisture-proof agent) for more than 48 hours, and confirm that the mobile phone is dry before trying to turn on the operation.

3. If some functions are missing after the mobile phone is turned on, such as the keyboard light is not lit, the screen touch is not working, etc., it means that the hardware is faulty, please contact customer service immediately or go to the service outlet for maintenance with the purchase invoice.

If your mobile phone gets into liquids such as coffee, cola, milk, seawater, etc., please send it to a service branch for repair as soon as possible.

What should I do if my phone can't turn on after water gets into it?

Method steps.

Turn on the phone after removing the moisture, don't turn it on immediately after the phone falls into the water, you should dry the water first, you can use a hair dryer to blow it, you should be far away when blowing, don't blow it in one place, if you can disassemble the machine, you can disassemble and blow it, to ensure that the motherboard, the screen is completely dehumidified and then turned on, so as not to burn the machine.

Turn on the phone after 48 hours, after the mobile phone falls off the water, it is best to wait for two days before turning it on, because although it has been treated with a hair dryer, it is inevitable that there will be no place involved, and it is not necessarily guaranteed that it will be completely dehumidified, it can be placed in a dry and cool place, and then check whether it can be turned on after two days.

Wipe the motherboard and the soaked place with anhydrous alcohol, if it falls into dirty water, it is best to open the machine and use anhydrous alcohol to clean the inside of the machine, mainly the motherboard and the display. Try replacing the battery, look for the same model of battery to replace it, and see if it can be turned on. Do it yourself, if the above methods don't work, it may be that the motherboard is broken, you can try to replace the motherboard and other operations, which is more difficult, it is not recommended to try.

Send it to a professional repair shop, if the above methods are ineffective, then send it to the repair shop for repair, but if you are afraid of revealing any secrets, or the mobile phone is very worthless (after removing the moisture and waiting for a few days or can not be opened, it is likely that the motherboard is broken, and changing the motherboard may be equivalent to buying a new mobile phone) Then change the mobile phone! Be sure to choose a regular repair shop.

That must be the water entering the inside, it must be sent for after-sales maintenance, don't move yourself. , otherwise the motherboard will be inadvertently damaged or the screen will be more damaged.

In order to reduce your losses, it is recommended to keep your phone off and bring the relevant proof of purchase to a nearby Huawei customer service center for repair, if you continue to use it or repair it at an unofficial service store, it may further damage the internal components. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

2.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

3.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Huawei Customer Service Center.

Make an appointment for service. Repair spare parts** inquiry.

Can you turn on your Huawei phone if it falls into the water, wait a minute, wait a minute, wait for it.

If the mobile phone falls into the water, you should find a maintenance personnel to deal with it as soon as possible, and turning it on will cause secondary damage.

The mobile phone itself is not waterproof, once the water will soak the circuit board inside the mobile phone, if it is not dealt with in time to turn on, it will cause the circuit board to burn out, so it can not be turned on.

Place your phone in a dry and ventilated place and use a paper towel to blot water stains on the surface of your phone.

2.Take out the SIM card and memory card, and do not move or shake the phone frequently to avoid moisture spreading inside the phone.

3.Bring your mobile phone to the mobile phone customer service center for testing and processing as soon as possible to avoid unnecessary losses.

This situation proves that the mobile phone has been flooded, if the water has entered, then it is necessary to shut down the machine at the first time, and then do not turn on the phone at will, it must be thoroughly dried before turning on the machine, if the water has not been turned on, then it proves that the components inside have been damaged, it is recommended to repair it as soon as possible.

The phone is basically broken when it gets into the water.

It is recommended that you do not use this phone anymore.

In order to reduce your losses, it is recommended that you deal with the following methods:

Emergency Measures:

1. Please keep the mobile phone away from the water source immediately, and use a paper towel to blot the water stains on the surface of the mobile phone.

2. If your phone has a removable battery, please remove the battery immediately.

3. If the phone is turned off, please do not try to turn it on.

4. Please remove the SIM card and microSD card.

5. After the phone dries naturally, take your phone to the Huawei Customer Service Center for testing and processing as soon as possible (data may be lost if you cannot back it up) to avoid unnecessary losses.

Precautions: Do not move or shake the phone frequently after water ingress to avoid moisture spreading inside the phone.

Do not bake with a hair dryer or stove after entering the water, so as not to blow liquids into the phone and damage the phone at high temperatures.

Some mobile phones can be turned on and used normally after simple processing, but mobile phones are composed of delicate electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn them on.

What should I do if my phone can't be turned on when I fall into the water, teach you to solve it quickly!

Today we Kunming Jiuyi mobile phone repair received a Huawei nova5 Pro mobile phone sent by the customer, the customer described the mobile phone into the water, at the beginning of the mobile phone into the water and did not find any problems with the mobile phone, but the mobile phone began to be abnormal after two days, the screen will flash at the beginning, the next day up found that the mobile phone can not be turned on directly, at the beginning the customer directly sent the mobile phone to our local Huawei after-sales maintenance point in Kunming for maintenance inspection, the result given after the after-sales inspection is the motherboard problem, maintenance needs to replace the entire motherboard, the cost is more expensive, the customer listened to the introduction of friends on the delivery to our maintenance point, today we will take a look at our 91 maintenance master how to solve.

After the master received the mobile phone, he found that the mobile phone did not turn on, first disassembled, after dismantling the motherboard, it was found that the motherboard was obviously corroded, directly dried and cleaned the motherboard, the motherboard was cleaned and powered on, and the motherboard was found to have leakage, but it was already possible to turn on, after a simple test, it was found that the mobile phone card had no signal, Unicom, Telecom, and China Mobile had no service, and the network could not be searched manually. Observe the RF part of the motherboard under the microscope, there is a slight water ingress, and the leakage target of the motherboard is locked on the RF part.

Dismantle the shield cover of the motherboard, and find that the HI6D21 power supply capacitor was corroded, and after cleaning, the multimeter is worth more than 400, which is normal, but it is still no service after installation.

Open the manual search network to measure the power supply of each power amplifier part is normal, remove the HI6D21 without corrosion, reinstallation is invalid, replacement is still invalid.

It's useless to deal with the corrosive parts, and all the signals are gone, so it should be a problem with the public line part. The common part of this machine only has RF cables, RF transfer switches, and intermediate frequency HI6353CV100. Huawei seems to have a common problem, the mid-frequency is easy to oxidize after water ingress, causing signal problems.

Weld HI6353 first, invalid.

Directly remove and reset the Hi6353 chip, boot the test, and find that the motherboard of the mobile phone has no leakage, and the signal has also come out. The installation test, everything is functional, and the maintenance ends here.

Huawei mobile phone water is more common in the daily maintenance work, Huawei mobile phone water after the attitude, do not hold the "mobile phone is no problem now" attitude, the mobile phone into the water must go to the professional maintenance point to disassemble and deal with it, otherwise the problem is getting more and more serious after a long time, just like today's customer, for our professional mobile phone repair master, the mobile phone into the water maintenance ideas must be clear, see the mobile phone fault and prescribe the right medicine to repair handy, here is Jiuyi mobile phone repair.

Engaged in Huawei mobile phone repair for more than ten years, if your Huawei mobile phone is broken and needs to be repaired (replace the screen or other repairs) or have other problems in the process of using Huawei mobile phones, you can directly search for Kunming Jiuyi mobile phone repair center by private message or leave a comment directly below, and you will reply to everyone uniformly when you see it.

The phone fell into the water, and it can't be turned on, so you don't want to force it on or charge him last time, it's easy to burn out the phone and take it to the repair shop first to see if it's burned out and they can repair it.

Blow it with a hair dryer for a while and try again.

What should I do if my Huawei phone falls into water and can't turn it on? Hello dear, 1. Take out the battery quickly after the mobile phone gets into the water. Then throw a few times at the side with more holes in the mobile phone stool (such as data cable dates or dry interfaces), or the side with a large gap, and throw out the water in the mobile phone.

2. After drying the inside with a hair dryer, when blowing the mobile phone, you must pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to the normal temperature. Remember not to blow the air vent of the hair dryer directly on the phone, too high a temperature is absolutely not good for the phone. If there is a cold air setting, it is best to turn on the cold air, which can also dry the water and not hurt the phone.

Blow for a few minutes and stop for a while, and then continue to shake the phone, shake it a few times and continue to blow, last 3-5 times It's about the same, the time for the hair dryer to blow the phone should not be too long, 20 minutes is basically fine. Hope it helps.