What does it mean to rub the ball in table tennis? What s the use?

Ball rubbing is the basic technique of catching the ball with downspin. In order to ensure the stability of the ball, we should pay attention to the following points during the practice: first, use the elbow as the fulcrum to complete the batting action; second, the wrist is relatively fixed; Thirdly, the forearm is placed horizontally in front of the body when the shot is directed backwards (Fig. 5). Fourth, when hitting the ball, rely on the small movement of the wrist forward to strengthen the friction of the ball (Diagram 6-7).

The wrist is relatively fixed, and the wrist is bent towards the little finger with the back of the hand facing upwards when the ball is struck smallly, which can make the wrist relatively stable. In addition to stabilizing the ball, it can also ensure contact with the ball at the beginning of the ascent of the incoming ball.

If you want to play a spin ball, you must increase the wrist movement when touching the ball, but if you rub the ball too much, you will not be able to control the ball well and will make the next cricket ball.

's connection speed is slower, so stability of the return and an earlier point of impact should be given more priority than the change in spin.

Relax your fingers before hitting the ball, and strengthen the stability of your fingers at the moment of contact with the ball. At the moment of contact with the ball, use your thumb, index finger, and middle finger to exert force. At this point, the ring finger.

And the little finger does not need to be forced, it just needs to play the role of stabilizing the racket.

If all the fingers are pushed hard while rubbing the ball, the whole arm will be stiff and unable to exert force. Therefore, it is necessary to grasp the strength and weakness of the finger force when rubbing the ball, so that the hitting action can be flexible and soft.

In order to prevent the opponent from attacking with high quality easily, it is necessary to speed up the return of the ball and hit the ball at the beginning of the rise of the incoming ball. When hitting the ball, pay attention to the racket head facing forward to hit the ball, because the center of gravity of the racket is in front, so it is easier to exert force and it is easier to find the accurate hitting point.

In addition, the ball is mainly used to deal with the spin ** ball, which is one of the basic receiving techniques, and it is also a strategic technique to mobilize the opponent and occupy a favorable situation to turn passive into active.

A very important basic skill, a lot of powerful rushing points are done by rubbing the ball transition. It shouldn't be underestimated. You say it's not very useful. Okay, let's talk about it, I don't understand, and then ask about the exchange. (Bye-bye.)

It is to rely on the friction of the racket to change the movement route of the ball, divided into slow rubbing and fast rubbing, mainly used to deal with spinning ** ball, is the basic receiving technique, but also mobilizes the opponent, occupy a favorable situation of the strategy technology, this is the basic technology of table tennis, you can search on Youku: Tang Jianjun table tennis teaching ** receiving technique.

Ball rubbing is a way to catch the ball with downspin, mainly used to control the ball, including fast rubbing, slow rubbing, splitting long, and swinging short. It looks simple, but it needs a good feel to practice well.

Generally, we call the ball sent by this technique as a spin ball、、As the name suggests。 Spin balls with selected power balls are more difficult than direct balls. Spin is divided into topspin, downspin, left-spin, right-hand, and other difficult spins

A shovel-like tackle is a common technique used to catch short downspins.

I think the rising period and the high point period are better, but the falling period is worse!

The rising period, the high point period, and the early stage of the decline can all be rubbed. So how should we use these periods? The ball must be rubbed out of variations to be threatening.

This change mainly comes from the problem of the time of hitting the ball, and some changes in the technique, and the period of hitting the ball is not only very important for us to rub the ball. Equally important for other technologies. If you want to swing the ball short, generally speaking, the ball is the rising period of rubbing, or the rising period of the starting point, then this will lead to the rising period of the starting point, the difficulty will be very large, and you will face the danger that the ball is easy to go to the net, but when you rub the rising period, it also has its advantages, that is, the ball is faster and the control is shorter, which is easy to make it difficult for the opponent to let the crack talk about the board.

But this is a little more difficult.

The high point period is less difficult than the rising period, and the ball will be more stable. But when it comes to the high point, the other party has enough time to react and adjust. The opponent will have time to judge the landing point or strength of your rubbing ball, and will also make a corresponding response.

But it's relatively stable. In the early stage of learning to rub the ball, amateurs can rub the high point period and find a feel. Then after the feeling is slowly better, look for a point forward, such as the middle and late stages of the rise, and then transition to the early stage of the rise.

And the decline period can also be rubbed. But the downside is more passive than the high. Because the rubbing period is likely to be that the pace is not in place, and it cannot catch up with the rise or high, then it can only catch up with the decline period.

At this time, there will be certain problems with the pace. The quality of the ball may be a little lower. Of course, at this time, the opponent also has enough time to resolve the rub, so the rubbing period is the worst.

Rising and high periods can be more to find a feeling. It will be helpful to improve the overall ball rubbing technique, or to improve the feeling of ball rubbing.

When facing an attacking downspin ball, you can use the ball to fight back and use it to contain the opponent.

It is best to be in the rising period or the high point period, so that you can better grasp it and achieve good results.

Ball rubbing is a technical term in table tennis, which is the technique of counterattacking a downspin ball close to the table tennis table. There are many kinds, according to the difference in hitting time, landing point and spin, it is divided into fast rubbing, slow rubbing, turning and non-turning, side rubbing, etc., the editor is here to share some detailed instructions about table tennis rubbing.

1. Lead the racket: Some golfers think that the ball rubs against the bottom of the ball, so the lead ball is generally lower than the height of the table, which is wrong, it should be noted that most friction techniques are from top to bottom. Therefore, the height of the shot put must be higher than that of the table, and under normal circumstances, the height of the shot put is basically the same as the height of a tennis ball.

2. Force: Most of the friends with a long ball age use "wrist shake" to exert force, which is the sequelae left by "positive rubber". Since the coefficient of friction of the positive raw rubber is smaller, it is necessary to increase the movement of the wrist to compensate for the lack of friction.

Beginners who use reverse glue don't need to imitate it. Only the combined force of the front of the wrist and the forearm is enough to "turn", which also facilitates the control of the ball.

3. Shoot control. The control of the straight plate is mainly based on the thumb, index finger and middle finger. However, some golfers use the pressure of the thumb and index finger on the shoulder to control the shape of the racket when controlling the front and back angles of the racket, which will make the wrist and forearm tense, which is not conducive to correct force and increases the burden on the whole arm.

4. Borrowing force: In the ball rubbing technique, it is necessary to use the ** force of the ball and the reverse movement of the spontaneous force to form friction force many times. This has already been explained in the text, but again it is emphasized here that attention should be paid to the timing of the shot, especially during the ascent.

Improve the friction effect, effectively control the arc, and pay attention to the load reduction and unloading force during the descent process and the friction force during the forward rotation.

5. Since most of the ball rubbing occurs inside the table, some players' preparation positions will be closer to the table, and even some players will unconsciously get closer and closer to the table during the friction process. This phenomenon is often reflected in beginners. Once the opponent "stretches the ball" or "chases", he often loses points because he has no time to move.

It is recommended that you pay more attention to the standing posture and footwork of the national team players, the normal standing position should be 1375px or 1500px as the basic table distance, and the feet should move back and forth to "move on".

The height of the lead shot is generally not lower than the level of the table, and the technical return can be selected according to the landing point of the ball, the correct way of playing with the belt hand, and the overall coordination and speed of the force.

If you want to play this kind of ball, you must go through professional training, systematic training, look for the help of your friends, look for the help of your coach, find the right point of force and resistance, and see the right time.

This needs to be judged according to the actual situation of the game and the way the opponent serves, so as to have a good effect.

The explanation of the words of ball rubbing is: table tennis technical terms. A technique for counter-striking downspin balls near the table.

When hitting the ball, hold the racket in front of the body, lean back the racket, send the upper arm forward and downward to exert force, and rub the middle and lower part of the ball with the racket. It has the characteristics of small action, fast ball speed and low arc. There are fast rubbing, slow rubbing, plus rotary rubbing, non-rotating rubbing and rubbing side rotation.

The explanation of the words of ball rubbing is: table tennis technical terms. A technique for counter-striking downspin balls near the table.

When hitting the ball, hold the racket in front of the body, raise Pi Zheng back with the racket, send the upper arm forward and downward, and rub the middle and lower part of the ball with the racket. It has the characteristics of small action, fast ball speed and low arc. There are fast rubbing, slow rubbing, plus rotary rubbing, non-rotating rubbing and rubbing side rotation.

The pinyin is: cuōqiú. The structure is:

Rub (left and right structure) ball (left and right structure). The phonetic pronunciation is: 一 .

What is the specific explanation of rubbing, we will introduce it to you through the following aspects:

1. Online explanation [click here to view the detailed content of the plan].

Rubbing the ball, a technical term for table tennis, also known as "tackle", is similar to chipping in action, also known as "small chipper". It is a technique for returning the downspin ball from the near table. There are many types, according to the different hitting time, landing point and spin, there are fast rubs, slow rubs, spins and non-spins, side spins, etc.

Generally, it is used more in the left half of the unit. The main points of the action are: the racket is in front of the body, when hitting the ball, the upper arm is stretched forward, the racket surface is tilted back, the upper arm is stretched forward and the force of the pronation is used to send the racket forward and downward, and the middle and lower part of the ball is rubbed during the descending period of the incoming ball.

It is characterized by small movements, low arcs, live landing points, and many changes in rotation, which can contain the opponent's offensive and create opportunities for grabbing or grabbing. Grip handicap.

Idioms about rubbing balls.

Dripping powder, rubbing crisp, rubbing hands and feet, rubbing hands and knees, talking about hearts, rubbing hands and feet, and being famous all over the world.

Words about rubbing the ball.

Knee talk, heart-to-heart, rubbing hands, dripping powder, rubbing crisp, rubbing hands, stomping feet, rubbing the edges, rubbing powder, rubbing powder, Zhu rubbing powder, Zhu Dagong selflessly, snowballing, rubbing hands and feet.

First, the use of technology is different.

1. Rubbing the ball is a technique for countering the downspin ball near the table.

2. Chipping is a technique that uses the friction of the racket to cut and hit the ball.

Second, the main points of action are different.

1. Rubbing the ball: The racket is in front of the body, and when hitting the ball, the upper arm is stretched forward, and the racket surface is slightly backward. Use the power of the upper arm to extend and spin forward to move the racket forward and downward, rubbing the middle and lower part of the ball as it descends on the catch.

2. Chopping the ball: When hitting the ball, the racket is backward and swings forward and downward from the top of the side of the body. During the descent, the racket swings in an arc and touches the middle and lower parts of the ball.

Third, the characteristics are different.

1. The ball rubbing action is small, the arc is low, the landing point is live, and the rotation changes a lot.

2. Chipping has the characteristics of slow ball speed, long arc, and ball spin.

Ball rubbing technique is one of the basic techniques in front of the net, in the game, high-quality ball rubbing can not only play a role in controlling the front court, forcing the opponent to only pick the high ball in the back court, so as to create offensive scoring opportunities for themselves, but also can often become an effective means of scoring.

1. Prepare for the action. First, determine whether the incoming ball is suitable for rubbing, then move to the direction of the incoming ball on the right side of the body, and when the position is in the right position, push the ground with your right foot forward, and at the same time hold the racket hand in front of your chest and stretch it out in the direction of the incoming ball.

2. Lead the shooting action. While stretching the racket, the left hand is naturally placed backwards, parallel to the opposite direction of the right hand to maintain body balance. Externally rotate the right forearm, abduct the wrist, and make a leading motion in the right front of the body.

3. Hitting the ball. Choose a spot 10 to 30 cm at the top of the net. Forearm slightly outward, wrist slightly adduction flash, use index finger and thumb to grip the racket, use the strength of wrist and fingers to rub the lower right bottom of the ball, so that the ball rotates and rolls over the net. ‍

Badminton Teaching: What is Rubbing? What is a net?

Knowing these things makes your ball skills soar Badminton teaching: What is a ball rub? What is a net?

Knowing these things makes your ball skills soar Badminton teaching: What is a ball rub? What is a net?

Knowing this makes your game go up.

It is the friction between the racket string and the ball holder when they come into contact.

The backhand is used a lot, generally used to grab the high point in front of the net, so that the badminton ball quickly flips the ball head, rolls down close to the net, and forces the opponent to raise the ball or touch the net, which is a means of active scoring, and can also create opportunities for the next shot.