The use method and steps of the shredder, and the method of rapid shredding. Because there is no pap

1. In the shredder, it has an automatic switch function, first turn on the automatic switch of the shredder. Before turning on the machine, please check whether the used voltage is the same as the rated voltage of the shredder.

Unanimous. <>

2. Then put the paper at the paper inlet. The shredder is an installation-free model, and the user only needs to plug it into a power outlet.

Press the power switch, the green indicator light is on, that is, the automatic feeding working state.

3. After pressing the button to start shredding, the paper cutter will automatically rotate to roll the paper into it and shred. In order to prolong the service life of the shredder, it is advisable for the normal shredding amount to be lower than the maximum shredding amount.

4. When the machine is running, if you find that there is paper that does not need to be shredded, you can press the "stop reverse" button, and the shredder will return the paper upwards to avoid greater losses.

5. During use, do not add too much paper to chop at one time, so as to avoid paper jams. When there is too much paper shredding at one time, the paper that needs to be shredded must be placed vertically at the paper inlet, without tilting.

Precautions for the use of shredders:

1. Before turning on the machine, please check whether the used voltage is consistent with the rated voltage of the shredder.

2.If the paper is fed too much, the machine will automatically reverse the unwinding, please remove the excess paper, and the shredder will resume normal operation.

3.Special motor overheating protection device, the motor overheating will automatically stop, wait for a certain time, the machine can work again.

4.Do not roll the corners of your clothes, ties, hair, etc. into the paper inlet.

5.The shredder is equipped with reflective infrared.

The sensor device is sensitive to strong light, so do not let strong light directly enter the paper port.

6.Please remove the shredder paper in time when it is full.

7.The shredder bucket must be in the correct position for the shredder to work properly.

8.The shredder knife is sharp and precise, non-professionals should not disassemble the machine by themselves, and the maintenance department of the agency should be notified in time when the shredder is faulty.

Just plug it in and stuff the paper directly through the slit of the shredder, not too much at a time.

Turn on the power and put the paper in it.

1. If there is an electric mixer that beats meat filling, soak it in water and throw it into pulp.

2. Users can use the "garbled stamp", that is, you only need to cover your file with garbled characters, and roll on it to smear the main information into garbled characters.

3. The knife shreds the paper and cuts it into segments or granules.

According to the composition of the shredder, the existing shredding methods are:

Crushed, granular, segmented, foamy, striped, filamentous, etc. There are some shredders on the market that can choose from two or more shredding methods. Different shredding methods are suitable for different occasions, if it is a general office occasion, you can choose segment, granular, filament, and strip.

However, if it is used in some occasions with high requirements for confidentiality, it must be foamed. At present, the shredding method composed of four knives is the most advanced working method, and the paper particles of the shredding are neat and neat, and the effect of confidentiality can be achieved.

For fast shredding, you can choose a shredder for continuous shredding. We know that ordinary shredders can only work for 5-10 minutes at a time and need to rest for 1 hour, which is not enough to shred a large number of documents. However, continuous shredding can be continuous shredding for more than half an hour, which can easily shredd, saving time and effort.

Bonsai continuous crushing is the only continuous crushing patent, pay attention to other false propaganda!

Continuous shredding can last up to one hour without stopping, and for large amounts of shredding and long-term shredding needs, continuous shredders can meet the needs of a larger scale. Continuous shredding improves the shredding performance, **unchanged, giving customers greater convenience and discounts. Continuous shredding can be continuous shredding for at least half an hour, and a shredder with a longer shredding time can be selected according to demand.

Look for a bonsai continuous shredder! Bonsai continuous shredder.

If the amount of shredding is large, it is not possible to do without a shredder, and it is recommended to choose bonsai continuous crushing.

Put it in the washing machine and add some cleaning balls to wash it together to ensure that only the slag is left, which is much better than the shredder

There's no good way to do it except tear it.