How to choose whether the heat dissipation function of the computer is good

1.Fan heat dissipation: The most common heat dissipation method in the computer host is to set up fans of different sizes in different positions such as the front and back, left and right of the host, and draw hot air from the inside of the host computer to achieve the heat dissipation effect through the blowing of the fan.

This method is relatively simple and inexpensive, but it needs to be cleaned and maintained regularly, otherwise the fan can easily be covered with dirt, resulting in reduced heat dissipation or failure.

2.Water cooling and heat dissipation: Water cooling is an advanced heat dissipation method for the host, which introduces fluid as the heat transmission medium, draws out the heat through the internal circulation system, and then dissipates the heat through the external heat dissipation equipment.

Compared to fan cooling, water cooling can dissipate heat more efficiently and can effectively reduce noise. However, the corresponding water cooling system is expensive and requires maintenance.

3.Heat dissipation sticker: Heat dissipation sticker is a relatively simple way to dissipate heat, which can conduct heat through materials such as copper, aluminum, etc., to quickly direct the heat out and reduce the temperature of the host.

This method can effectively improve the heat dissipation effect, but it is necessary to pay attention to the thickness and quality of the heat dissipation sticker, otherwise it will cause damage to the host components.

4.Large air-cooled radiator: A large-scale air-cooled radiator is generally composed of a radiator heat dissipation chip, a copper heat sink, an aluminum heat sink, etc., in which the fan will be relatively large, which can achieve a faster and more efficient heat dissipation effect.

This method is generally suitable for high-performance gaming PCs or other consoles that require strong cooling capabilities.

To sum up, the choice of which potato seed to dissipate heat needs to be decided according to your own use, budget and needs. Either way, regular maintenance and cleaning are required to ensure the heat dissipation effect and service life of the host.

1. You can use notebookhardwarecontrol test software to understand the temperature of the CPU and hard disk in real time, and you can use copy software such as SETI to pull the CPU load rate to 100%, and continue for a period of time, and then measure the temperature.

The function of the heat sink is to absorb this heat and then dissipate it into or out of the chassis to ensure that the temperature of the computer parts is normal. Most heat sinks absorb heat by contacting the surface of the heat-generating parts, and then transfer the heat to distant places, such as the air inside the case, and then the case transfers the hot air to the outside of the case to complete the heat dissipation of the computer.

There are many types of heatsinks, CPUs, graphics cards, motherboard chipsets, hard drives, chassis, power supplies, and even optical drives and memory will all need heatsinks, and these different heatsinks cannot be mixed, and the most common contact is the CPU heatsink.

Depending on how heat is taken away from the radiator, the radiator can be divided into active and passive cooling. The former is commonly used for air-cooled radiators, while the latter is common for heat sinks. Further subdivision of heat dissipation methods, it can be divided into air cooling, heat pipe, liquid cooling, semiconductor refrigeration, compressor refrigeration, etc.

Generally, the heat dissipation of the notebook is on the side, and the heat dissipation is normal! If it's underneath, it's better to buy a radiator!

The next Master Lu is the previous Z** that can detect the temperature of the CPU and hard disk, and the heat dissipation of the general ASUS notebook is good, and the hard disk can reach 7200 rpm.

How to judge the heat dissipation performance of the fan in the computer host:

The chassis of about 200 yuan can be assembled into a horizontal air duct, the so-called horizontal air duct is the front panel air intake, rear air outlet design, players use such a chassis without the transformation of the air duct, the installation of the platform can be used directly, the requirements for players will not be very high.

The chassis above 400 yuan can also be assembled in addition to the component horizontal air duct, the three-dimensional air duct can better maintain the temperature of the high-end platform at a certain temperature, and at the same time has certain requirements for the level of players, and the fan position of the fan position of the chassis requires players to buy it by themselves. At this time, players also need to adjust to their own platform to keep the platform temperature at an optimal state.

For high-end gamers, the vertical air duct may become the choice of players, the vertical air duct chassis uses the principle of hot air rise to blow the air duct from the bottom to the top, and the temperature of the platform can be maintained at a good temperature, first take a look at the heat dissipation effect of a pre-installed fan in the case.

The CPU temperature is about 55 degrees, and the graphics card temperature is about 64 degrees, indicating that the front fan and the top fan play a role respectively, and at the same time, through the principle of hot air rising, the top fan accelerates the flow of hot air, pumping hot air to the outside of the case, and the temperature drops. Horizontal air duct cooling technology is supposed to be the simplest and easiest solution to dissipate heat, using the basic concept of forward and backward out, allowing the air to flow horizontally while taking away the heat from the graphics card and CPU. It gives us a clearer picture of how the horizontal air duct dissipates heat.

If you have extremely high temperature requirements, then you need to invest a certain amount of money to adjust the air duct of the case, such as the three-dimensional air duct, so that the design is more helpful for heat dissipation. Through testing, it is seen that the number of fans in the case does not necessarily have a good effect, and the right amount is the key to weighing the overall heat dissipation effect.