What kind of plastic is the filament of a plastic broom made of? What equipment is needed, what tech

Ordinary plastic brooms in daily life.

The material is generally polypropylene.

This material, the silk of this plastic broom is also synthesized from polypropylene.

Buy a plastic extruder can be produced, the specific production method, you go to the manufacturer to buy, someone will give you a demonstration, this is not to worry.

In plastic extrusion equipment, the plastic extruder is usually called the main machine, and the subsequent equipment supporting it, the plastic extruder is called the auxiliary machine. After more than 100 years of development, the plastic extruder has been derived from the original single screw to twin-screw, multi-screw, and even screw-less models. The plastic extruder (host) can be matched with various plastic molding auxiliary machines such as pipes, films, materials, monofilaments, flat wires, packing belts, extruded nets, plates (sheets), profiles, granulation, cable coating, etc., to form a variety of plastic extrusion molding production lines and produce various plastic products.

Therefore, plastic extrusion molding machinery is one of the widely used machines in the plastic processing industry, both now and in the future.

In fact, the material of ordinary plastic brooms in our daily life is generally polypropylene, and the silk of this plastic broom is also synthesized with polypropylene. The English name of polypropylene is called: polypropylene, abbreviation:

pp。**Recycled PP plastic is referred to as PP recycled material.

Features of PP::

PP is a semi-crystalline material, which is characterized by non-toxic, odorless and tasteless, and is harder and has a higher melting point than PE materials used to make plastic bags.

PP products are lightweight, have good toughness and good chemical resistance. The disadvantages of PP: low dimensional accuracy, insufficient rigidity, poor weather resistance, easy to produce "copper damage", it has the phenomenon of post-shrinkage, after demolding, easy to age, brittle, easy to deform.

The material of plastic brooms is generally polypropylene, English name: polypropylene, abbreviation: PP.

PP is a semi-crystalline material, non-toxic, odorless, tasteless, harder and has a higher melting point than PE materials used to make plastic bags.

PP products are lightweight, have good toughness and good chemical resistance. The disadvantages of PP: low dimensional accuracy, insufficient rigidity, poor weather resistance, easy to produce "copper damage", it has the phenomenon of post-shrinkage, after demolding, easy to age, brittle, easy to deform.

**Recycled PP material is called PP recycled material. Like the landlord said that the plastic broom filament, ** can be made into PP recycled particles, depending on its quality, the market price is 3000 to 8000 yuan per ton.

The process of processing PP recycled particles is simple, and now the technology is very mature, and you can buy a plastic extruder to produce it. It is recommended that you search for the locomotive company to know what to do...

Plastic filament: Tongcheng Jinzhu plastic filament.

As the above respondent said, it is pp material quality, you can use it, but you have to have a lot there, if the quantity is small, it is not worth using it at all, using this thing does not require any technology, it is very simple, there are plastic machinery. There is no need for a locomotive company, their equipment is expensive to death, and the locomotive has only been manufacturing plastic machinery for a few years, and a thin layer of iron is added to the outer packaging, just to look good, and the things inside are the same. It may not be mature in all aspects.

We have 20,000 pieces of equipment here, and they can sell them for more than 100,000 yuan. It's a pit man. We have a large market for recycled plastics, and plastic machinery and equipment are relatively mature.

It has a history of twenty or thirty years. And the particles produced are produced in the market here, and you don't have to worry about the market.

Summary. Dear, plastic brooms belong to the type of plastic process. The structure of the plastic broom is very simple, but in the production process, the broom head is the most complicated manufacturing process.

First of all, the staff first manually put the semi-finished broom head on the automatic assembly line. After starting the machine, the robot will grasp the broom heads one by one and enter the next process: punching.

Each broom head will be punched with 132 eyelets in the order arranged by the punching machine, don't look at the number of holes, it takes less than a minute, this speed is almost catching up with the sewing machine. After the punching is completed, it is time to clean the perforated surface.

Dear, plastic brooms belong to the type of plastic process. The structure of the plastic broom is very simple, but it is the most complex production process of the broom head in the production process. First of all, the staff first manually put the semi-finished broom head on the automatic assembly line.

After the machine is moved before the hall is opened, the manipulator will grasp the broom head one by one and enter the next process: punching. Each broom head will be punched out of 132 holes in the order arranged by the punching machine, don't look at the punching so many holes, it takes less than a minute, this speed is almost catching up with the sewing machine.

After the punching is completed, it is time to clean the perforated surface.

What is the translation of Dianbai District Huierjie Plastic Products Factory into English?

Pro, Huierjie Plastic Products Factory translated into English is Huierjie Plastic Products Factory. Break up.

HURJ is a high-tech joint-stock enterprise integrating R&D, production and sales, specializing in supporting the world's high-end intelligent bathroom brands. Introduction: Dianbai District Huierjie Plastic Products Factory was established on 2022--06-23, the operator is buried Sun Cuimei, the registered capital is 100,000 yuan, and the unified social letter bending wheel is 92440904mabpq8fj4e,.

Abstract:The broom filament is a silk item on the head of the broom used by the plastic broom to clean the garbage, and the plastic broom filament is generally dissolved and then condensed into filament by a plastic extruder when making the plastic broom filament. The selection of plastic broom filament materials is generally PET and PP, these two materials have their own characteristics, let's take a look at the plastic broom filament!

1. What does plastic broom wire mean?

Our common plastic broom is composed of broom head, broom wool board and broom hair and other parts, plastic broom silk is a silk item on the broom hair, usually using chemical materials through the plastic extruder, at a high temperature of about 200 degrees to melt the plastic, the melted plastic is fixed through the mold to form a filament.

Second, the type of plastic broom wire.

There are generally two kinds of plastic broom wires: PET broom wire and PP broom wire.

1. PET broom wire.

PET is a chemical material, the full name of polyethylene terephthalate, has good mechanical properties, impact strength is 3 5 times that of other films, and good folding resistance. PET broom wire has the following advantages:

1) The heat deflection temperature and long-term service temperature are the highest among thermoplastic general engineering plastics;

2) Because of the high heat resistance, the reinforced PET is immersed in a solder bath of 250 for 10s, almost no deformation and no discoloration, especially suitable for the preparation of electronic and electrical parts for soldering;

3) The bending strength is 200MPa, the elastic modulus is up to 4000MPa, the creep resistance and fatigue resistance are also very good, the surface hardness is high, and the mechanical properties are similar to those of hail thermosetting plastics;

4) Since the ethylene glycol used in the production of PET is almost half cheaper than the butylene glycol used in the production of PBT, PET resin and reinforced PET are the lowest among engineering plastics and have a high cost performance.

2. PP broom wire.

PP is also a chemical material, the full name is polypropylene, which is a white waxy material. PP broom wire has the following characteristics:

1) PP is a semi-crystalline material, non-toxic, odorless, tasteless, harder and has a higher melting point than PE materials used to make plastic bags;

2) PP products are lightweight, good toughness and good chemical resistance;

3) Low dimensional accuracy, insufficient rigidity, poor weather resistance, and easy to produce "copper damage";

4) It has the phenomenon of post-shrinkage, and after demolding, it is easy to age, brittle and deformable;

**Reused PP material is called PP recycled material, due to the simple processing process of PP recycled particles, the technology is mature, so most of the plastic broom filament is PP recycled material, ** made of PP recycled particles, and then used in the production of plastic broom filament. Depending on the quality of this material, the market price is 3,000 to 8,000 yuan per ton.