-
Teflong (PTFE), commonly known as: Teflon, Teflon. The operating temperature is 280 °C, and the maximum temperature is 380 °C.
1. It is used between low temperature -196 and high temperature 300, with weather resistance and anti-aging. After practical application, such as 250 high temperatures, continuous storage for 200 days, not only the strength will not be reduced, but also the weight will not be reduced; Left at 350 hours at 120 temperatures, the weight is only reduced by about that; At -180 ultra-low temperatures, it can maintain its original softness.
2. Non-adhesive: the surface is smooth, and it is not easy to adhere to any substance. Easy to clean all kinds of oil stains, stains or other attachments attached to its surface; Almost all adhesive substances such as paste, resin, and paint can be easily removed;
3. Chemical corrosion resistance, strong acid, strong alkali, aqua regia and various organic solvents.
4. Drug resistance, non-toxic. Resistant to almost all potions.
5. It has high insulation performance (small dielectric constant, tangent below), anti-ultraviolet ray, anti-static.
6. Fireproof and flame retardant.
-
It is melamine plastic (MF), and its chemical name is the famous melamine, and the English name is melamine. There are many plastic tableware and the like, which are non-toxic and tasteless, heat-resistant, corrosion-resistant, high and low temperature resistant, good mechanical strength, and very durable.
-
Coasters have plastic ones, and those mats are called coasters.
-
Listen to your description like a thermal pad?
-
There are raw plastics and cooked plastics, raw plastics are of poor quality and hardness, do not resist high temperatures, and melt when exposed to fire or high temperatures. Cooked plastic has good hardness, high temperature resistance, and is not easy to melt when exposed to fire. Brother I'm on a task, my answer is helpful to you.
-
Because the thickness is thick and the temperature is low, if you cut it to millimeter thickness, it will definitely burn out.
-
It is made of epoxy resin, a thermosetting material, with toner and other additives. LCP material cannot meet the mechanical property requirements, so LCP material is not used.
-
It is generally thermoset, bakelite and jade powder.
I've also heard of someone using LCP, but I've never seen it.
-
resin, because he is a thermoset plastic,
-
With plaster, it can be set in a few minutes, and then the outside is treated with gold powder, and many Buddha statues in the Buddhist ware store are doing this, as for the resin, I don't know.
-
Credit Suisse glass products can, you can take a look.
-
Glass ashtrays are now more commonly used by many people, and there are many OEM OEM customization categories, such as tourism memorial categories, gift categories, corporate image categories, and publicity effects. If you can print words, print logos, and print bad trademarks, it is recommended to take a look at the new wing glass ashtray OEM customization.
-
How heavy! 100% light will not break.
-
Guess what this does, just try it.
-
Asking such a question is simply an insult to the wisdom of others.
-
ABS does not produce excessive toxicity after combustion, and will not cause health damage to the human body under normal circumstances. Ashtrays made of this material are also added with flame retardants. Therefore, it will not be deformed in contact with cigarette butts. There are certainly chemical changes, but they are all negligible.
-
The plastic of the ashtray is more resistant to high temperatures, and its function is to load cigarette ash, and the cigarette butt will not burn under normal use if the cigarette butt is not burned all the time.
-
The scientific name doesn't matter, this is a decorative board (I don't know if there is a smoking function), I suggest you DIY make a more beautiful one than it, the main problem is that the color should match the general and the style is more beautiful.
-
I used to buy Weizhi V2 floor glue in this store, I feel very good, I see that you have doubts, I hope to help you.
Authentic car wraps are made using PET, which is a small plastic pellet. There are those that are colored or colorless. Through magnetron equipment or other advanced extrusion equipment, the target material is rolled into the solar film, and finally becomes the automotive solar film we use now through several different sputtering and repeated coating processes. >>>More