What should I do if my iPhone dies after factory reset?

1.Press and hold the home button for 6-8 seconds to exit the stuck app.

2.Press and hold the power on and off button to try to restart.

Generally, there are the following reasons for the crash:

1.When writing a system file, there are software conflicts between software and software due to the order of creation or installation, between software and software, and between software and system.

2.Manually deleting system files or deleting system files by mistake will also cause white apples;

3.Anti-installation software causes loss of system-related files and white apples;

4.Temperature issues, too cold or too hot, or the iPhone is subjected to severe vibrations can sometimes also cause white apples;

5.Programs that are not installed by iTunes will result in white apples.

It is recommended to try a factory reset again after shutting down.

To factory reset your iPhone, go to Settings - General > Restore, and tap Restore items as needed.

The contents of the restored project are as follows:

1. [Reset All Settings] This operation can restore the settings of the iOS device to the default state of the current system version, but will not erase personal data.

2. [Erase All Content and Settings] This operation can erase all settings and personal data, and restore the iOS device to the factory state of the current system version. To avoid data loss, we recommend that you back up your data before performing the operation. Depending on your device, it may take a few minutes to completely erase your device.

3. [Reset Network Settings] This operation restores the network settings, which will clear the password and settings of the Wi-Fi network, cellular network settings, VPN and APN settings, and the device name on the About This Machine page. It is often used to solve problems with abnormal network usage.

4. [Restore Keyboard Dictionary] This operation can restore the keyboard dictionary to the default state of the current system version. It is usually used to solve input-related problems such as text input sorting anomalies.

5. [Restore Home Screen Layout] This operation can restore the desktop icon layout to the default state of the current system version, and dissolve all application folders created on the desktop.

6. [Restore Location and Privacy] This operation can restore all native and third-party applications that have obtained all permissions. Typically used to resolve malfunctions without reinstalling the app.

Note: If you have set a "Lock Screen" and "Restricted" password, you will be asked to verify the password before restoring.

Hello, method.

1. When encountering the situation that the iphone6 factory reset is stuck, it is generally possible that the iphone6 system recovery and recovery progress has not been completed, many people may think that their iphone6 is stuck there, but in fact, it is not the case, the system is used for a long time when restoring, and the recovery process is about 15 to 40 minutes, so you need to wait patiently for a while and don't worry.

2. Generally speaking, iPhone6 will rarely get stuck during factory reset, but iPhone6 will also crash during factory reset for some reasons. If this is the case, you can press and hold the power button and the home button of the iphone6 phone at the same time to try to force restart the phone to see if it can return to normal after restarting the phone.

3. If the above methods cannot be solved and the problem still exists, it is recommended that you use Apple iTunes software to reflash the mobile phone system, and you need to **iOS firmware version number,** to the computer. If you have a backup on your computer, you can restore it by restoring the system backup of your phone.

4. Set the Liluru iphone6 mobile phone to the DFU state, and the limb activation setting method is as follows: when the iphone6 is turned on, connect it with the computer with a data cable. Then press and hold the power off button for 2 seconds, then press and hold the power off button and the home button of iphone6 at the same time for about 7 to 10 seconds, and then press and hold the home button for 10 seconds to enter the DU state.

5. Finally, open the iTunes software on the computer and press and hold it on the keyboard"shift"Don't let go, then click the recovery button of iTunes software with your mouse, and select the previous best firmware for recovery.

Hello! If it doesn't work, then you can only use a data cable to connect to the computer, and use software such as iTunes to restore or upgrade the system.

The steps are as follows:

1.Put the device into DFU mode.

Press and hold the power button and hold the home button at the same time, press and hold together for about 10 seconds, at this time only release the power button, and continue to press the home button for about 30 seconds until you enter DFE mode.

3.Open iTunes, you will see a recovery prompt, click OK, and then the software update will be carried out, waiting for the update to complete.

If it is a non-jailbroken phone, then it is probably because the phone has too much data, continue to wait, and the progress bar will be automatically completed after the cleanup; If it is a jailbroken phone, you can't directly restore the factory settings, and the phone will be infinitely white.

Apple 6 Crash Solution: It may be that after the phone clears the cache, the first boot is relatively slow. It is recommended to press the Home button first and hold it for 6-8 seconds to quit any program that can get your iPhone stuck.

Or turn off all the software on your phone and restart your phone to give it a try. In fact, don't be too anxious about this situation, because Apple's mobile phone is relatively slow, so this situation is very normal.

Maintenance of iPhone:

Clause. First, the battery of the Apple mobile phone cannot be replaced, so we should use it well, and it is recommended that you turn off the battery for at least eight hours a day, which can greatly save the use of the mobile phone battery and prolong the service life of the Apple mobile phone.

Clause. Second, the shell of the Apple mobile phone is very bright, we should also pay attention to this point when maintaining, we should often wipe the Hengxingyou shell of the mobile phone with a cotton cloth, do not use a cotton cloth stained with water, the correct way is to use a cotton cloth to dip a little bit of liquor, and the wiping effect is very good.

Clause. Third, when buying an Apple mobile phone, it is very expensive, so we don't want to save any money when using it, we must buy a good electrostatic film to protect your Apple mobile phone, don't save money, buy a few dollars of adhesive film.

Clause. Fourth, you should also buy a better mobile phone case when you actually use the Apple mobile phone, so that you can wrap the mobile phone well, mainly to prevent your mobile phone from being scratched and grinded, and it is better to use a transparent silicone sleeve.

Clause. Fifth, the use and maintenance of the Apple mobile phone requires you to have a good habit of use, it is recommended that you do not change the system casually, which will increase the load of the Apple mobile phone, especially the jailbreak behavior is best not to do, which will increase the work consumption of the hardware.

Clause. 6. When we use Apple mobile phones, we should clean up the mobile phones after using them for a period of time, and try to turn off all the hardware and software that we don't use, or you can choose to delete them.

Summary. 1. It is recommended to go to the mobile phone after-sales service shop for repair.

2. Or go to a professional flashing store to flash the Apple phone.

3. If the Apple phone is stuck in a freeze, you can try to press and hold the power button at the top for about 5 seconds to see if the phone responds. If the crash is not severe, the phone will enter the lock screen state or restart automatically.

4. If it doesn't work when you press the power button, you can also try the second method, which is to press and hold the home button and the power button on the home screen together to force the power off of the phone. If that doesn't work, turn it off and let the phone slowly drain the remaining power and turn it off by itself. When the battery is used up, the power is cut off.

At this time, charge the phone again, and after charging to 5%, you can turn it back on.

What should I do if the iPhone is restored and restored to the dead.

1. It is recommended to go to the mobile phone after-sales service shop for repair. 2. Or go to a professional flashing store to flash the Apple phone. 3. If the Apple phone is stuck in a crash, you can try to press and hold the power button on the top for about 5 seconds to see if the phone responds.

If the crash is not serious, the phone will enter the lock screen state or restart automatically. 4. If it doesn't work when you press the power button, you can also try the second method, which is to press and hold the home button and the power button on the home screen together to force the power off of the phone. If that doesn't work, turn it off and let the phone slowly drain the remaining power and turn it off by itself.

When the battery is used up, the power is cut off. At this time, charge the phone again, and after charging to 5%, you can turn it back on.

It's always been like this.

You leave it for a while, don't touch it, and after a while you try it according to the above method. Good.