How do I reset my cat? How to reset the method after the cat is reset

Reset the wireless modem.

It needs to be operated in the background of the wireless modem.

The steps to reset the wireless modem background are as follows:

1. In the browser address bar, enter the wireless modem background management address or.

2. Enter the wireless modem administrator password.

3. Click on the Advanced Settings option.

4. Select Device Management.

5. Tap Factory reset in Device Management.

6. Click Restore factory settings to complete the reset.

There are many models of cats, and here are two ways to reset a broadband cat.

1. The reset method with the reset key on the broadband modem.

1. Unplug the optical fiber and turn off the power.

2. Press and hold the reset button and then turn on the power, and then release the reset button after about 10 seconds when the red light changes from solid to flashing.

3. Wait for one minute before turning off the power and then turning it on.

2. There is no reset method for the reset button on the broadband modem.

1. Connect the broadband modem LAN port to the computer, open the browser and enter the computer to appear on the login page, enter the username and password on the back of the modem to log in.

2. After logging in, select Network Remote Management, delete the LOID, and click "Save App".

3. Then select Management, Device Management, Restore Factory Settings, Restore Default Settings, and the modem will automatically restart.

After the factory reset of the broadband modem is successful, the connected device cannot access the Internet after the factory reset of the broadband modem, and you need to reset the Internet access and password settings for the broadband modem.

Press the RESET button above for 10 seconds and you're OK.

1. There is a reset hole in the back of each cat and it can be restarted after holding it down with a needle for 3-5 seconds.

2. Don't let the cat connect to the route, and connect directly to the computer of this Qiaoshu. Access via the web can be accessed by typing in the address bar of the browser.

Restart is to power off, turn off the switch, plug in, turn on the switch, is to clear the data packet, in fact, it is also the heat dissipation process, the first few minutes of the re-call to wait for it to connect to the Internet, and then it is still normal to surf the Internet, and the Internet is smoother.

Reset the wireless modem.

It needs to be operated in the background of the wireless modem.

The steps to reset the wireless cat background are as follows: with ant holes.

1. In the browser address bar, enter the wireless modem background management address or.

2. Enter the wireless cat administrator password beam.

3. Click on the Advanced Settings option.

4. Select Device Management.

5. Click Restore factory settings in Device Management.

6. Click Restore factory settings to complete the reset.

Enter the management address of the cat in the computer browser (usually or; Log in with your initial username and password on the page that opens.

Method 1: Follow the setup wizard step by step; Generally, after the setting is completed, you need to restart the cat to take effect (the setting page Senhu face has a button to press the code or manually restart).

Method 2: If you don't need to route to the Internet, you don't need to set anything up at all. Sometimes there will be problems with the telecom's Chi Chun Lu ** line, you lift the **machine to see if it rings**, **ring line will have electricity, if you also install **, your cat should use a separator to connect to the **line, the signal is separated.

Connect the computer network cable to the cat;

Enter the management address of the cat in the computer browser (usually or;

Log in with the initial username and password on the page that opens, usually admin admin (usually written on the cat);

If you are familiar with cats, you can set it manually, and if you are not familiar, you can find the guide on the left;

Follow the Finger and Dan Setup Wizard step by step; Concealment.

Generally, after the settings are set, you need to restart the cat to take effect (the settings page has a disturbance button or manual restart).

It depends on the situation, and there is no need to reset the account password if it has not changed.

If the account and password for surfing the Internet have changed, then you need to reset it.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.