What are the departments that make up a laser cutting machine?

Lasers, cutting heads, cooling systems, machine tools, consoles, computers, linear guides, proportional valves, solenoid valves, servo motors.

The first is the use of a laser generator. This laser generator is mainly used for the conversion between light and electricity, so this laser generator has an important role. However, because the cutting machine has high requirements for the beam, not all laser generators can be used for cutting.

The second part is the cutting machine, in fact, it is not only this cutting machine, but also some other cutting machines. The machine tool of this cutting machine generally has a beam transmission system, as well as a workbench and a numerical control system.

The third part is the five-axis machine and the laser punching machine. It is mainly used for cutting.

The cutting head, also known as the light guide head, will show you a sample drawing.

To put it simply, there will be two things in front of the general laser for light, one is the galvanometer, and the other is the light guide cutting head.

The cutting head has a focused shaping section, which can make the light more energetic during industrial processing, and improve the processing efficiency. In addition, according to the actual processing scene, the laser spot shape and processing depth can be adjusted when the light is output. And it can add some specific monitoring modules and displacement systems, and can have a good package, which can effectively reduce spatter and protect the lens.

As long as your spot is good enough, it can cooperate with the XY translation table below, and can achieve fine processing with an error of about 2 microns; It can also be used on the linear slide table at home to achieve fast processing.

CCD imaging neck, Z-axis, valve interface cutting head.

In layman's terms, it is the position where the laser is fired (the knife in the chef's hand), and you can use the laser cutting head to cut out the parts you want according to the pre-set drawings. In addition, there is a protective lens inside, which is bad more frequently, but ** is very cheap, and you can buy some directly from a treasure.

Laser cutting is to use a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, and at the same time blow away the melted material with a compressed gas coaxial with the laser beam, and make the laser beam move relative to the material along a certain trajectory, so as to form a certain shape of the slit. Laser cutting technology is widely used in the processing of metallic and non-metallic materials, which can greatly reduce processing time, reduce processing costs, and improve the quality of workpieces.

Light cutting is to use a focusing mirror to focus the CO2 laser beam on the surface of the material to melt the material, and at the same time blow away the melted material with a compressed gas coaxial with the laser beam, and make the laser beam and the material move relative along a certain trajectory, so as to form a certain shape of the slit. Since the seventies of the twentieth century, with the continuous improvement and development of CO2 laser and numerical control technology, it has become an advanced processing method for industrial plate cutting.

At. In the fifties and sixties, as the main method of plate cutting and cutting: oxyacetylene flame cutting was used for medium and heavy plates; For thin plates, shearing machine blanking is used, stamping is used for large quantities of forming complex parts, and vibrating shears are used for single parts.

After the seventies, in order to improve and enhance the incision quality of flame cutting, oxyethylene precision flame cutting and plasma cutting were promoted. In order to reduce the manufacturing cycle of large-scale stamping dies, CNC stepping and electromachining technology have been developed. All kinds of cutting and cutting methods have their advantages and disadvantages, and have a certain scope of application in industrial production.

Laser cutting machine is a kind of high-precision, high-efficiency cutting equipment, which has been widely used in various fields. The laser cutting machine system is composed of multiple parts, including the optical path system, the control system and the mechanical system, etc. Among them, the optical path system is the core part of the laser cutting machine, which is composed of lasers, mirrors, lenses, optical path pipes, etc.

The control system is responsible for controlling the switch of the laser, the position and speed of the laser beam, etc. The mechanical system is responsible for the movement of the laser head, the clamping and positioning of the workpiece, etc.

The advantages of the laser cutter system are obvious. It can achieve high-precision cutting, and the accuracy can reach the following: At the same time, it can also cut workpieces of various shapes, including planes, curved surfaces, special-shaped, etc.

Laser cutters can also cut a variety of materials, including metals, non-metals, ceramics, and more. In addition, the lead laser cutting machine can also be used to achieve continuous cutting, high-speed cutting and automatic production, which greatly improves production efficiency and saves labor costs.

However, there are also some drawbacks to the Qin Hao laser cutter system. First of all, the cost of the laser cutting machine system is higher and requires a large investment. Secondly, the maintenance and upkeep of the laser cutting machine system requires professional skills and knowledge.

Finally, the laser cutting machine system will produce a large amount of exhaust gas and waste materials during use, which needs to be treated and treated.

To sum up, the laser cutting machine system is a high-precision, high-efficiency cutting equipment, which has been widely used in various fields. It has many advantages, such as high precision, multi-material, multi-shape, automated production, etc. But at the same time, it is necessary to pay attention to the high cost, technical expertise and waste disposal.

The operation of the laser cutting system mainly includes the following steps:

1.Preparation: Make sure that both the laser cutting machine and the material are in working order. Check whether the coolant, gas**, etc. of the laser cutting machine are sufficient, and clean the laser cutting area.

2.Set parameters: According to the type and thickness of the material, set the appropriate parameters such as laser power, cutting speed and focusing distance. The setting of these parameters affects the cutting effect and speed.

3.Positioning the material: Place the material to be cut on the table of the laser cutting machine, and ensure that the relative position of the material and the laser beam is accurate by adjusting the table position.

4.Turn on the machine: Power on the laser cutting machine and start the system. Confirm that all safety equipment, such as light curtains and emergency stop buttons, are operating properly according to the instructions on the operator interface.

5.Run the machining program: Use the laser cutting software to load and run the appropriate machining program files. These files usually contain information such as cutting path, speed, power, etc. Make sure that the correct machining program and material parameters are selected.

6.Monitor the cutting process: During the laser cutting process, closely observe the situation in the cutting area. Ensure that the quality of the cutting edge and the cutting speed of the missing traveler meet the requirements.

7.Finish cutting: When the cutting task is completed, stop the operation of the laser cutting machine. Be careful to wait for the laser to turn off completely and ensure that the cutting area is safe before removing the cut material.

Please note that the above steps are general procedures only and may vary slightly depending on the laser cutting system. Before the official operation, please be sure to refer to the operation manual of the laser cutting machine, and follow the corresponding safety specifications and operation instructions.