How to choose the thickness specification of aluminum veneer

The thickness of aluminum veneer should be divided according to the use environment of indoor and outdoor and curtain wall ceiling lights, generally as follows:

Thickness standards for aluminum veneer: ceilings, curtain walls; And the thicker is not the better, but the width of the board and the weight of the plate itself should be considered.

First of all, the curtain wall aluminum veneer is made of high-quality aluminum alloy plate as the base material, which is formed by CNC bending and other technologies of building materials, and the surface is sprayed with fluorocarbon, paint and other decorative coatings.

The thickness of the commonly used curtain wall aluminum veneer is ,,, there are a small number of specifications used by users on the market, and the model of the curtain wall aluminum veneer is H24.

Secondly, curtain wall aluminum veneer is often used for outdoor and indoor decoration, outdoor can be applied to building exterior walls, indoor can be used for interior wall decoration. The curtain wall aluminum veneer is light in weight, strong in hardness, simple and atmospheric in style, not only practical, but also beautiful.

Nowadays, most buildings use this material to do exterior wall or interior decoration, the material is used for a long time, the rate is very high, it can be called an environmentally friendly green building material, and it is very suitable for all kinds of buildings.

For details, please refer to the following national standards:

GB T 23443-2009 Aluminum veneer for building decoration.

JG T 331-2011 Fluorocarbon aluminum veneer products for building curtain walls (implemented on February 1, 2012).

YS T Aluminum Curtain Wall Panel Fluorocarbon painted aluminum veneer.

Aluminum veneer with carved pattern on the wall.

The general norms are: ,, if you want cheap, if you want high-end. What's your project? I'm also engaged in engineering design (moving bricks on the construction site), and I usually use it a lot.

If I can help you, please accept it. Thank you.

Aluminum veneer is made of high-quality alloy anti-rust aluminum plate as the base material, which is made by sheet metal processing, surface chemical treatment, painting, baking, curing and other processes in the factory. Aluminum veneer is hung on the outside of the main structure of the building by the lightweight enclosure wall, so that it forms a large area of continuous wall, called aluminum veneer curtain wall.

The thickness of aluminum veneer for outdoor use is generally selected; The thickness of the low-rise and podium sections can be selected, and the thinnest or ceiling can be selected for the interior walls and ceilings.

Width direction: Usually the raw materials of aluminum veneer of aluminum plate manufacturers are rolled into the factory, and the common width varies from factory to factory, mostly to wider and wider. The width of aluminum veneer should be given priority to the following specifications, because this specification is the lowest and the supply cycle is the shortest.

The plate width is too wide not only to improve, but also with the increase of size, its deformation capacity increases, which is easy to cause deformation of the surface of the workpiece, instability after installation and other consequences.

Length direction: Since the maximum length of the general bending equipment is 6m, it is not recommended to process aluminum veneer workpieces with a length of more than 6m.

Fluorocarbon aluminum veneer thickness size 1200 more than the markup.

According to the thickness, it is divided into: (unit: mm).

Thin plate conventional plate.

Medium plate plate 25 200

Extra thick plate 200 or more.

According to the alloy composition, it is divided into:

High-purity aluminum plate (rolled from high-purity aluminum with above content).

Pure aluminum plate (the composition is basically rolled from pure aluminum).

Alloy aluminum plate (rolled from aluminum and auxiliary alloys, usually aluminum-copper, aluminum-manganese, aluminum-silicon, aluminum-magnesium, etc.), composite aluminum plate or brazing plate (aluminum plate material for special purposes obtained by means of multi-material compounding), aluminum-clad aluminum plate (aluminum plate is coated with thin aluminum plate for special purposes).

White aluminum veneer on the background wall of the front desk.

The standard thickness of aluminum veneer is: surface treatment: fluorocarbon spraying, polyester spraying This is the standard answer, if you want to do something like that, you need to customize.

The nominal thickness of the aluminum veneer substrate (excluding the coating) for outdoor use should not be less than, and the nominal thickness of the aluminum veneer substrate for indoor use (excluding the coating) shall be agreed upon by the supply and demand parties", see the following national standards for details:

GB T 23443-2009 Aluminum veneer for building decoration JG T 331-2011 Fluorocarbon aluminum veneer products for building curtain walls (implemented on February 1, 2012).

YS T Aluminum Curtain Wall Panel Fluorocarbon painted aluminum veneer.

Thickness: Surface treatment: fluorocarbon spraying, polyester spraying.

Aluminum veneer is a non-standard customized product, there are many factors that determine the first grade, according to the general convention of ** between 120 210 yuan flat. Accurately consult the aluminum veneer manufacturer, and the manufacturer will also ask the customer about the aluminum veneer specifications, size, shape, thickness, surface treatment, aluminum plate material requirements, product quantity, tax including freight, etc., which are the conditions for calculating the aluminum veneer.

There are generally 5 types of thickness of aluminum veneer: 1mm thickness, thickness, thickness, thickness, and thickness. The size of the specification is customized, the conventional size is 1400*4000, and the ultra-wide and super-large can be up to 2200*6000, of course, this is the largest, beyond this size, then there will be problems from raw materials, processing machinery, surface treatment, transportation, and installation.

What is the thickness of aluminum veneer? The conventional thickness of aluminum veneer is 1 5 mm, 2 0 mm, 2 5 mm and 3 0 mm, and the common specifications are 600*600 mm and 600*1200 mm. What are the <> of aluminum veneer

The conventional thickness of aluminum veneer is mm, mm, mm, and mm, and the common specifications are 600*600mm and 600*1200mm.

What are the advantages and disadvantages of aluminum veneer?

Advantages: 1. Light weight, good rigidity, high strength, the average thickness of the aluminum plate weighs 8kg per square plate, and the tensile strength is 100-280N mm2.

2.Good durability and corrosion resistance. PVDF fluorocarbon coatings based on Kynar-500 and Hylur500 can be used for 25 years without leg coloring. Aluminum veneer curtain wall building.

3.The manufacturability is good, and the construction technology of first processing and then painting can be adopted, and the aluminum plate can be processed into various complex geometric shapes such as plane, arc, and spherical surface.

4.The coating is uniform and colorful, and the advanced electrostatic spraying technology makes the adhesion between the coating and the aluminum plate uniform and colorful, and the choice space is large.

5.It is not easy to stain, easy to clean and maintain, and the non-adhesion of fluorine coating film makes it difficult to adhere to pollutants on the surface, and has good cleanliness.

6.The installation and construction are convenient and fast, the aluminum plate is formed in the factory, does not need to be cut at the construction site, and can be fixed on the frame.

7.It can be used and is conducive to environmental protection. Aluminum plate can be 100%**, different from glass, stone, ceramics, aluminum-plastic panels and other decorative materials, ** high residual value.

Disadvantages: Heavy blows are easy to deform, and there are pittings on the surface.

What is the installation method of aluminum veneer?

1. Install the corner according to the same level.

2.According to different requirements, there are different skeletons, such as L50*50*5mm angle steel fixing, embedded aluminum pendant fixing, etc. There are different fixation methods according to different products.

3.Place the pre-installed hanger on the gusset keel, close to the light steel keel together with the gusset keel, and buckle vertically under the light steel keel. The spacing of the gusset keel is determined according to the size of the plate, and all accessories must be adjusted to the level after installation.

4.Buckle the gusset plate on the keel in turn. After each buckle, press down the cleats and connect the keel with connectors.

5.Gloves must be worn when installing the panel. If you accidentally leave fingerprints or stains, wash them with a detergent and wipe them dry.